Intro

You’re Not Alone

Installation can be hard. We’re happy to talk it over with you or take over a DIY project that you’ve realized needs professional installation. Our support hours are from 9AM-7PM Monday – Friday (EST) and we are available via chat, email, phones, and remote PC screen-sharing, if you need any help. You can reach us at 866-414-2553.

Disclaimer: The laws governing cable and wire installation can vary from state to state and sometimes even counties and cities pass specific, unique laws regarding cabling; these state, county and city laws are too complex for us to explain. This page is not a how-to installation guide, as we cannot keep up with local laws.

Although we now offer installation, locally, we started as a DIY-only company, and we primarily serve those adventurous types who want to run the cable for themselves. Even so, we get asked about do-it-yourself installation all the time…. We wanted to post a few of our standard answers here.

Part 1

Don’t Start a Fire or Shock Yourself

Electricity Can Kill You; Avoid Electrical Lines!

Never strap, staple or otherwise run networking cable to conduit or raceways carrying electrical current. Never run any cable within 2 inches of Class I electrical lines, lighting, fire alarm, or power lines or devices.

Give a Wide Berth to High Voltage Devices or Lines

Never run any cable within 6 feet of a conductor or fuse box. A minimum 5-inch distance is required from any fluorescent lighting fixture or power line over 2 kVA and up to 24 inches from any power line over 5 kVA. If unsure about the a device or line, consult an electrician. Route cable away as far as you can from large motors, generators, induction heaters, arc welders, x-ray equipment, and radio frequency, microwave or radar sources. NEC/NFPA 70, Article 800-52

Protect it from Future Physical Damage

You might want to put a nail or screw in later and don’t want to puncture your cables, so when a cable, raceway, or soft conduit (anything you can puncture) is installed parallel to framing members (joists, rafters, or studs), furring strips, or crown molding, keep the cable at least 32 mm (1.26 inches) from the edge. NEC 300.4(D)

Don’t Leave it Dangling – Secure Your Cables

You can connect cable directly to a surface with straps, staples, cable ties, hangers, or similar fittings, but you have to secure it somehow. NEC 800.24; 300.11

Use Plenum rated cable in Areas with Airflow

If you are going to run cables through an area which is used by your heating, air circulation, or air conditioner systems (such as above a drop ceiling in an office), you must use Plenum rated cables, which have a special insulation that has low smoke and low flame characteristics. When securing cable in Plenum required areas, make sure your straps, cable ties, and similar fittings also are plenum rated. NEC 830; NFPA 90A

National Rules – Consult your local laws

These guides are meant to familiarize our clients with the national requirements as expressed in the National Fire and Alarm Signaling Code and the National Electrical Code. Your state or local laws may differ. If you live outside the USA, consult your governmental laws. Don’t consider this your only resource.

Turn the Breaker Power OFF

Any time that you will be drilling or cutting into your wall, you want to turn the power off. You don’t want to drill into a hidden electrical line. You probably already know this, but our lawyers insisted.

Wear Safety Goggles

Any time that you are drilling, you want to wear safety goggles and hearing protection, like ear plugs.

Security Camera Installation Guides v2

Part 2

Drilling through Different Materials

Sheetrock (most interior walls)

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of sheetrock.

Wood

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of wood.

Stucco

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of stucco.

Brick and Masonry

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of brick.

Concrete

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of concrete.

Metal Siding

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of metal siding

Part 3

Running the Cable

Basic Cabling

Terminating Cable (Putting the ends on)

Instructions for putting the RJ45 ends on to ethernet (for example, Cat5 / Cat6 / Cat5e) cable.

Using Our Waterproof Connectors

When installing a camera outdoors, it is imperative that you put our waterproof RJ45 Connector on the ethernet (for example, Cat5 / Cat6 / Cat5e) cable.

No Protection – Just Running the Wire

You can connect cable directly to a surface with straps, staples, cable ties, hangers, or similar fittings, but the cable could get damaged and someone might be able to cut it.

24 Volt Wiring: PTZ

The Spotlight PTZ cameras uses 24 volt power rather than POE because it requires more power than is capable of Power-Over-Ethernet for its natural white light spotlight. The Laser can also be powered via 24 volt power and can be powered the same way, although it is not required to do so. This guide shows you how to wire these PTZs.

24 Volt Wiring: Sharpshooter

The Sharpshooter IP Bullet cameras uses 24 volt power rather than POE because it requires more power than is capable of Power-Over-Ethernet for its long range infrared. This guide shows you how to wire the Sharpshooter.

Protecting your Cabling

Liquidtight Plastic Tubing

Liquidtight plastic tubing is easier to work with than flexible metal tubing, but is less secure. It is also great for areas with lots of expected moisture as it won’t rust.

Flexible Metal Conduit (FMC)

Flexible metal conduit is difficult to cut (watch out for sharp edges), but easier than solid conduit to install.

Electric Metal Tubing (EMT)

Solid metal conduit is the most secure form of installation. It requires a specialty conduit bending tool.

Conduit Fill

This chart will let you know how many cable runs you can fit in one conduit pipe, depending on the size of the conduit.

Raceway (Outdoors) – Coming Soon

Raceways are most popular indoors to make the space look clean and professional. There are also outdoor rated raceways; this guide covers using raceways outdoors.

Clean and Professional Interiors

Raceway (Indoors)

Raceways are most popular indoors to make the space look clean and professional. There are also outdoor rated raceways. This guide covers using raceways indoors.

Ethernet Wall Plates

Not recommended. It can be difficult to find a wall plate that passes POE power and provides grounding. These devices also provide a secondary point of failure, and take up far more room than a cable pass through plate for larger systems.

Dealing with Long Distance

Using POE switches to reduce cabling

You can run one cable to a POE switch and then run several cameras to that switch, however, POE switches are not plug-n-play. POE switches do require you to know a decent amount about computer networking.

Cables run over 300 feet

Cat5e and Cat6 cable data has a limit of 300 feet, but if you need to go further than that you can use a POE extender, POE injector, or POE switch to hear and repeat the signal. This article discusses when you would use each of these tools.

Long Distance Wireless

Military-Grade Long-Range Wifi Solution are used when attempting to send wireless IP Camera video data more than 100 feet (and up to 3 Miles). These products will require a professional wireless network technician on location.

Part 4

Mounting Cameras and Recorders

Basic Camera Installation

Bullet Cameras on Walls

In this guide, we will be installing a bullet camera on a wall.

Bullet Cameras on Ceilings

In this guide, we will be installing a bullet camera on a ceiling.

Bullet Cameras on Soffits

In this guide, we will be installing a bullet camera on a soffit.

Dome Cameras on Ceilings

In this guide, we will be installing a dome camera in a ceiling tile.

Dome Cameras on Walls

In this guide, we will be installing a dome camera on a wall.

Positioning the Lens in our Dome Cameras

In this video guide, we demonstrate how to adjust the lens positioning on our Marshall, Guardian, Warden, and Mosquito Dome Cameras.

Audio and Alarm Inputs FAQ and Sample Wiring Guide

Here’s a guide on Line-Level Audio Inputs and Analog Wired Alarm Integration.

Attaching Our Camera Mounting Accessories

Electrical Mounting Boxes

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

PTZ Wall Mount Bracket

This guide will show you how to mount your PTZ camera to the wall mount bracket.

Pole Mounts

In this guide, we will be installing a Hornet Pro bullet camera on a pole.

Pendant Mounts

In this guide, we will be installing a Radius panoramic dome camera on a pendant mount. You can install all our PTZ and a few of our dome cameras via Pendant mounts.

Screw Size Chart

Lose a screw? No problem. Here’s all our 2018 product line screw sizes in one convenient place.

NVR Mounting Options and Hard Drive Installation

Shelf / Desk Mounting NVRs

This is what most people do: just put it on a shelf or desk. This makes it easy to connect to a TV/monitor and use the mouse (included) to control the NVR.

Rack Mounting NVRs

Companies often want to put the NVR in their server rack room. People who do this often to control the NVR only through our apps or web browser. Only our larger NVRs (16 channels and up) are wide enough to be rack mounted (and they come with ears). Our smaller NVRs can use our Rack Mount Shelf.

Wall Mounting NVRs

Many people choose to mount their NVR on a wall near a TV. To do this, you will want to purchase a vertical rack, like this one that matches the height of your NVR. The 16, 32, and 64 channels units have a height of 2U and the 128 channel is 3U. NVRs are heavy and you will want to make sure your wall can support the weight.

Mounting NVRs behind a Wall / in an Attic

People who are afraid of the theft of an NVR often place it behind a false wall or in an attic. People who do this control the NVR only through our apps or web browser. Be aware: Not all attics are insulated well enough to be within the temperature requirements of the NVR. Temperature range is listed on each NVR’s technical specs tab.

“NVR” Lock Boxes

There’s a few companies advertising “NVR Lock Boxes,” but any Server Rack or Computer Rack will do. Most Server Racks or Mounts have locks on them already. This picture is of a Tripp Lite Server Rack with Lock It houses a 32 channel NVR, two of our POE Switches, and a router, but there are tons of companies selling small server racks online.

NVR hard drive installation

If you purchase both a hard drive(s) and recorder from us, we will happily install the hard drive for you. but here’s a handy guide if you want to do it yourself.

Part 5: Specialized Work

When to NOT DIY – Get an Expert

Long Distance Wireless

Military-Grade Long-Range Wifi Solution are used when attempting to send wireless IP Camera video data more than 100 feet (and up to 3 Miles). These products will require a professional wireless network technician on location. We can’t offer support on this product remotely, as once we can see it remotely, that means that it is already working.

Aerial Cable

Aerial cable clearance varies based on location (cable over a road needs more clearance than over a sidewalk, for example), needs to be enclosed within 8 feet of finished grade, and requires a on-site structural analysis to make sure the cable won’t break. Hire an expert.

Burial of Cable

Number one, call 811 before you ever dig: know where your power company has buried its power cables! The required cable burying depth also can vary based on your local zoning laws and your certificate of occupancy; you should get an expert.

Elevators

Don’t even try to install any cable in one without a licensed elevator technician’s help as the cable needs to be inside the cable traveler. An error in securing the cable can result in damage to the elevator’s operation – and potentially the people inside it. Don’t mess with it; get a licensed elevator technician to run the cable.

<p>The post Security Camera Installation Guides v2 first appeared on NVR IPCAMERA SECURITY.</p>

Troubleshoot Offline Camera

Troubleshoot Offline Camera

Learn how to troubleshoot when a new Verkada camera is offline

Updated over a week ago

Use this article to read through some common scenarios and try the suggested troubleshooting tips to help. If you still need help, please contact Verkada Support.

What is the LED status of the camera?

Camera has been solid orange for over 10 minutes

Camera is blinking blue for over 5 minutes

Camera is solid blue for over 5 minutes, says “waiting to be connected on Verkada Command”

Roles and Permissions for Cameras

Roles and Permissions for Cameras

Learn about the roles and permissions available for Verkada Cameras

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Cameras.

Org-level roles

Organization-level roles are configured on a per-user basis. Groups cannot be used to set organization-level roles.

Below, click the down arrow to the left of the role to learn more about the role and access.

Org Member

Org Admin

Verkada Cameras Troubleshooting 2024

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

CP52-E PTZ permissions

The CP52-E PTZ camera permissions determine who can manage the Sentry Mode feature.

Permissions model (example)

Here’s a simple example of a permissions model that a typical organization with several sites and users may employ:

Users and their required level of access

Permissions each user should be assigned

.

Set Org Admin permissions

Revoke Org Admin permissions

Set site and subsite permissions

You can set site and subsite permissions by adding a user, a group, or by existing users and groups.

Add a user

Add a group

Existing users and groups

You can set the site and subsite permissions for existing users and groups by managing the user roles or the sites.

Manage roles

Manage sites

Customize roles and permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

Roles and Permissions for Command

Roles and Permissions for Command

Learn about the roles and permissions available to Command users and groups

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Command. It also explains how to customize roles and permissions.

Permission levels

Permissions are set at the following levels:

Daha fazla göster

Permissions considerations

Common user permission configurations

Daha fazla göster

Roles and permissions by Verkada product

.

Org-level roles

Org-level roles are configured on a per-user basis. Groups cannot be used to set org-level roles.

Org member

Org Admin

Access Control Role

.

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

Access Site Admin

.

Customize Roles and Permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

FAQ

Why has my organization disappeared?

Why are cameras missing from my organization?

Why can’t I access certain features or settings, such as other users?

Resolve Issues with Missing Cameras

Resolve Issues with Missing Cameras

Learn how to resolve issues when cameras are missing from your Verkada account

Updated over a week ago

When you log in to Verkada Command, you can only access cameras and video in organizations or sites where your user account has permissions.

Note: Even if you are an Org Admin, you still need to grant yourself permission to view all sites. Learn more about roles and permissions for cameras and Command.

If you log in to Command and cameras are missing or have disappeared, always check user permissions. The most common reason cameras are not visible is that your user account needs permissions to the site(s) where the cameras are configured.

Common reasons that can cause cameras to disappear

Check permissions

If you are an Org Admin, you can check and correct your own permissions:

Resolve Issues with Night Mode

Resolve Issues with Night Mode

Common issues with IR and Night Mode with steps to resolve them

Updated over a week ago

Each Verkada camera has night vision capabilities, using a sensor to detect low-light situations. When external lighting is low, the camera switches to night mode and records in black and white, using infrared (IR) LEDs to illuminate the environment. If the IR is emitted improperly through the dome or reflected into the lens, it negatively impacts image quality.

Common night mode issues

It is imperative that the dome remain free of debris and the camera is installed properly to achieve the best image quality. When viewing footage in night mode if the footage appears obscured it is most likely the result of one of the following scenarios:

Camera always in night mode

If your camera is always in night mode even where there is sufficient light in the environment the lux (light) value may need to be adjusted. If this is the case, reach out to Verkada Support for further assistance.

Environmental obstruction

If the camera is mounted too close to a wall, ledge, or light source, the image quality may be degraded due to IR reflection.

Recommendation. Ensure that cameras are mounted sufficiently far away from surfaces that may cause the IRs to reflect, such as light sources.

IR obstruction

If a first-generation Dome camera (D30 or D50) is operating in night mode when there is plenty of light, the IR sensor is likely obstructed by the camera housing.

To fix the obstructed light sensor, physically rotate the lens barrel assembly 180° so the sensor and IRs are visible through the camera case.

Example: Proper and improper orientation

Note: After rotating the lens barrel, the camera orientation may need to be changed in Command.

<p>The post Verkada Cameras Troubleshooting 2024 first appeared on NVR IPCAMERA SECURITY.</p>

.

As a world-leading video-centric AIoT solution and service provider, Dahua has a lot in store for us in terms of making camera installation simple, quick and user-friendly. Its recently launched 5E initiative focuses on user-centered design and aims to provide customers with efficient operations, cost reduction, security guarantees, and value enhancement. Easy Installation, one of Dahua 5E’s key components, refers to easy hardware installation and easy software deployment. For hardware, Dahua constantly optimizes their structural design, tools requirements, guide materials, process safety, etc., so as to improve the hardware’s ease of installation. For software, Dahua continuously optimizes their accessibility, flexibility, complexity, and correctness, thus enhancing the easy installation of software products.

.

Here are some of the highlights of Dahua 5E’s Easy Installation:

.

Dahua PTZ

.

.

Pain Points:

.

.

Solutions:

.

.

Application Scenarios: retail store, villa

Dahua Easy Installation Manual v1

Also Read : DAHUA IP Camera 5.0 UI Setup

Dahua Easy Installation Manual v1.

Dahua IPC

.

.

Pain Points:

.

.

Solutions：

.

.

Application Scenarios: cafe, parkland

.

Dahua ITC Cardan Bracket 8019

.

.

Pain Points:

.

.

Solutions:

.

.

Application Scenarios: highway, urban roads

.

HDCVI

.

.

Pain Points:

.

.

Solutions:

.

.

Application Scenarios:

.

.

What is Symmetric Encryption Algorithm?

.

In the modern stage of cryptography, the concept of key secrecy was introduced, giving rise to a new encryption algorithm paradigm called symmetric encryption algorithm.

.

Symmetric encryption algorithm, also known as single-key algorithm, is characterized by the use of an identical key for both encryption and decryption. They can be broadly classified into two major types: sequence ciphers (also known as stream ciphers) and block ciphers.

.

The core of stream cipher encryption is the key (also known as the seed key) that goes through a key stream generator to produce a key stream. This key stream is then XORed with the plaintext byte stream to obtain the ciphertext byte stream, encrypting one bit or one byte of the data stream at a time. The encryption process is illustrated in Figure 1.

.

.

Figure 1: Steam Cipher Encryption/Decryption Process

.

The core of block cipher encryption is to divide the plaintext data into fixed-length blocks and encrypt them using a key, resulting in ciphertext blocks. The plaintext is encrypted on a byte-by-byte basis. The process is illustrated in Figure 2.

.

.

Figure 2: Block Cipher Encryption/Decryption Process

.

Block cipher encryption is achieved by grouping the plaintext. To enhance the security in the encryption process and facilitate grouping, two key points are usually considered: encryption modes and padding modes. As for the specific selection of encryption mode or padding mode, it often depends on practical application scenarios, required security strength, and other factors.

.

The introduction of encryption modes mainly considers whether there should be any correlation between different blocks or whether each block should be encrypted independently. Different encryption modes represent different iteration methods used in the encryption process of plaintext blocks. Table 1 provides the advantages and disadvantages of using different encryption modes.

.

.

Table 1: Comparison of Several Encryption Modes

.

The introduction of padding modes mainly addresses the issue of plaintext that is not a multiple of the specified block size. In such cases, the remaining bits need to be padded to match the algorithm’s specified block size. During encryption, the plaintext is padded, and during decryption, the padding needs to be removed according to the same padding mode. Table 2 presents several common padding methods in block ciphers.

.

.

Table 2: Comparison of Several Padding Methods

.

Symmetric encryption algorithms encompass various algorithms, such as RC4 and ZUC for stream ciphers, and DES, 3DES, and AES for block ciphers. They are mainly used to address issues related to secure transmission, secure storage, and have a wide range of applications. However, these algorithms also have drawbacks, such as difficulties in key distribution and the inability to provide non-repudiation, which restrict their application in certain scenarios.

.

<p>The post Dahua Easy Installation Manual v1 first appeared on NVR IPCAMERA SECURITY.</p>

What is iCSee?

iCSee is a mobile application designed for remote video surveillance. It allows users to connect and control various security cameras, network video recorders (NVRs), and digital video recorders (DVRs) using their smartphones or tablets. iCSee provides real-time video monitoring, playback, and management of surveillance devices over a network connection. The app offers features such as live streaming, motion detection alerts, two-way audio communication, video recording, and cloud storage options. iCSee is compatible with a wide range of IP camera brands and models, making it a popular choice for home security, business surveillance, and other monitoring needs.

What is iCSee camera?

iCSee Camera refers to any camera compatible with the iCSee mobile application.

Can my camera be connected to iCSee?

iCSee was developed by Xmeye, a company that specializes in security surveillance and video intelligence research and development. They focus on providing technical services, and solutions in the security monitoring field, including various modules, main boards, software, and cloud services.

So, generally speaking, only cameras using Xmeye module solutions can be adapted to iCSee app.

How to install iCSee for PC?

Wired cameras can be accessed on PC by downloading the VMS software. But, for Macbook users, the software currently only supports local area network connection.

For wireless cameras, it is recommended to connect through mobile devices, as accessing via PC may result in connection timeouts or instability.

VMS Downloading (Windows)

VMS Downloading (Macbook)

How to install iCSee app for mobile devices?

iCSee is a free app available for both iOS and Android platforms, offering full functionality without any costs or subscription fees. Follow these simple steps to install it on your device:

.

Explore our camera range: iCSee WiFi cameras, V380 4G cameras, and Ubox solar cameras. Engineered for home security, our cameras are affordable, low-power and durable, and our market share in third world countries is growing rapidly.

.

This tutorial applies to both icsee and icsee pro cameras.
Since the app is always being updated, the interface may be a little different.

Camera description

The details are subject to your manual.

Connect To The Power Supply

Plz connect camera to the power cable,and turn on the power .

If you need to storage the video via the local TF card, plz install the TF card first then turn on the power.

（TF card doesn’t support the hot plugging,  plz plug and unplug memory card when device is power off)

Video tutorial

How To Use Icsee Camera 2024

Read Also : XMEYE NVR Face Recognition guide

.

Register/Login

1.Open”iCSee” app, click “sign up” then use the phone number or mailbox to register account.

2.Register successfully, enter your phone number or mail number in the login interface, enter the password, login your app.

3.You can also use the wechat, facebook, line or the temporary visit to login app.

[Auto-pairing] WiFi Network Configuration

Note: camera can support 2.4G wifi for the time being, doesn’t support 5Gwifi, plz set the router parameter to2.4G first before configuring network, during the connection, phone,router and camera need keep within the 2m distance

1.Phone connect to the wifi network.

2.Click the “+”in the upper right corner click the “Add WiFi camera” according to the device’s voice prompt, follow the app interface guide to enter router’s password,click “confirm” start to configure network(if the device doesn’t appear voice prompt for a long time, you can long press the reset to restore default, then go on to configure network).

3. Enter the search device’s interface, the device is in the connection process, plz wait.

※ Program search, do not operate other programs ;

※ When the camera prompts “succes  sfully connected to router”, it will automatically go to the next step.

※ The camera fails to hear the prompt “succes sfully connect to router”. Please restore factory Settings and match again.

4. After connecting successfully ,interface will prompt to set device’s password and name for your device, after finishing, follow the app interface guide to complete network configuration .

5. After finishing, device will show in the device’s list, it represent the device is connecting successfully.

6. Click it you can view the monitoring image, and do the relevant operation and setting.

Note: Movement tracking is only for indoor ip cameras , bullet ip camera and dome cameras do not have this function

Note: If the automatic etwork configuration fails, you can choose the following two methods to configure the device

The second type: [Manual configuration] Wired network

1. Long press the camera Reset button for 10 seconds to restore the device to factory settings .

2. Connect your router to camera via network cable.

3. Connect phone to your router wifi network.

4. Login “iCSee” app, click the “+”in the upper right corner, and click “more” in the upper right corner.

5. click “Add the camera on same router.

6. Enter search device interface, click searched camera to add device,device will show in the device’s list, which represent device connect successfully.

7. Click it to view the monitoring image, also can do the relevant operation and setting

Manual configuration: AP netless direct connection mode

When there is no network in the installation environment, please select the following pairing method;

 1. Long press the camera Reset button for 10 seconds to restore the device to factory settings .

2. Short press the camera Reset button 2-5 to enter the direct connection mode (most devices will voice prompt “enter direct connection mode”).

3. Open the mobile phone desktop-settings-wireless network, search for the device wireless hotspot name, Enter the wireless password:1234567890, connect to the wireless hotspot of the device;

Indoor IP Camera hot spot name: robot_xxxx;

Other kind of camera hot spot names: camera_xxxx;

Tips:

AP hotspot mode is only used for installation when there is no network in the environment, and cannot be remotely monitored,can only be accessed within 10 meters of the establishment of the hotspot!

4. Open the ‘iCSee’ APP, and directly add the device in the local direct connection mode.

5. The device is displayed on the device list interface, which means that the device is successfully connected.

6. Click the ‘Play’ button to enter the monitoring screen and perform related operations and settings.

7. If you have already registered an account to log in, please click the “+” sign at the top right, and click the “AP direct connection” mode to add.

How to set up mobile tracking？

Note: Mobile tracking and smart humanoid alert can’t be used at the same time;

●Click the “Mobile Tracking” switch buttonin the preview interface to turn on the corresponding function;

●Motion tracking: when it’s on, as long as an object enters the camera’s illumination range, camera will track the moving trajectory;

●Watch Point: set a fixed position, when the camera is operating or tracking, it will automatically return to the set position after staying for a period of time;

How to set the dual-ligh tal ert mode Star light full color？

Note: Mobile tracking and smart humanoid alert can’t be used at the same time;

Open the ‘iCSee’, click the ‘real-time playback’ , click or slide to the “light” or the “bulb” icon in the screen to open the setting screen;

●Night colored lights：When the light is insufficient, the white light will start, and the image will be colorful;

●Infrared night vision： When the light is insufficient, the infrared light is activated and the image becomes black and white;

●Double light alert：When the light is insufficient, the infrared light will be activated. When someone enters the monitoring screen, the white light will be triggered and the image will be colorful.
After a few seconds when the person walks away, the infrared mode will be switched on and the image will become black and white;

How to s et the humanoid alert function?

Note: Mobile tracking and smart humanoid alert can’t be used at the same time;

Open the ‘iCSee’, click the device real-time playback, click on the upper right button ‘setting’ ，Enter the ‘settings’-smart alarm, open the interface to make related settings.

Function introduction:

 
●Notification: Must be turned on to receive alarm trigger information.

●Humanoid detection: only judge and detect people to trigger an alarm;

●Show Tracking: When the human figure appears on the screen, the human figure can be tracked and reminded; Rule setting: select the designated area [Warning Line], when someone enters the divided area, the alarm can be triggered;

Add shared device

1. Click “Share” in the device list to pop up the QR code page using the main phone.

2. Log in to the ‘iCSee’ APP with the mobile phone you want to share,
click the “+” sign in the upper right corner of the APP main interface, click “Scan QR code to add a camera” , scan the QR code of the device shared by others or input Add the device serial number (the shared device must be connected to the Internet and successfully
added to the APP).

How to Restore factory settings/AP hotspot switching？

1. Long press the camera ‘Reset ‘ button for 10 seconds, and you can let go when you hear ‘ Restore factory setting,please wait’.

2. Short press the camera Reset button 2-5 to enter the direct connection mode (most devices will voice prompt “enter direct connection mode”).

How to query device serial number and info?

1. Open the ‘iCSee’, enter the real-time playback of the device, click on the upper right setting to enter the setting center-about the device , the QR code can be directly scanned and shared with other family members to watch (the QR code valid time is 30 Minutes); if exceeded, it will automatically expire;

2. If you find that the device time is not synchronized, please click the device time to synchronize it;

HOW TO USE THE CAMERA?

1.Please open the software to register one and log in to your account if you do not have an account.

2.Click “+” > Set up “MY DEVICE” to WiFi

3.Enter your WiFi password. Then click “confifirm” and wait for the camera to connect it.

Notes

* Please reset the device if the camera does not have any voice reminders for more than 180 seconds.

* Please check the WiFi password again and make sure the WiFi channel is 2.4GHz.

* Please do not make the device too far away from the Router.

4.Upon a successful connection, you can set up the name and the password of the camera.

SHARE THE CAMERA：

1.The administrator can send the QR code and password of the camera to the other persons.

2.Scan the QR code by the administrator to share with you and add the camera.

Infographics

.

<p>The post How To Use Icsee Camera 2024 first appeared on NVR IPCAMERA SECURITY.</p>

Regardless of your budget, there’s an outdoor security camera that’ll fit your needs. From premium products crafted by Ring to budget-friendly options like those from Wyze, there are dozens of well-reviewed models that are perfect for protecting your home.

In fact, some of the best outdoor security cameras also double as floodlights –- allowing you to light up your yard. Others are wireless for easy installation, while a handful require wired connections (though this allows for continuous monitoring).

Below, you’ll find a list of the best outdoor security cameras of 2023. You can’t go wrong with any of them, but each one caters to a specific audience and budget, so take a closer look at each to figure out which is best for your home.

John Velasco / Digital Trends

Arlo Pro 4

Best outdoor security camera

.

The Arlo Pro 3 was our pick for the best outdoor security camera for some time, but after testing the Arlo Pro 4, it brings a couple of new additions that help it earn our top pick. Just like its predecessor, it packs 2K video resolution and a wide 160-degree viewing angle. Also included are a weatherproof camera with color night vision, a built-in LED spotlight, and a built-in siren that can alert you to danger.

What makes this model superior is the fact that it no longer is tethered to a hub in order to talk with your home’s Wi-Fi network. You won’t need it this time, which certainly streamlines the setup process. And best of all, not only does it perform as exquisitely as the Arlo Pro 3 when it comes to safeguarding your home, but it now boasts a lower starting cost of $200 for a single camera, whereas the Arlo Pro 3 started at $500 for a 2K camera system.

The Arlo Pro 4 includes a three-month free trial of Arlo Smart, which gives you access to advanced features like 30 days of recording history, activity zones, enhanced 911 calling, and advanced detection features.

John Velasco / Digital Trends

Wyze Cam v3

Best outdoor camera for night vision

.

Night vision is a vital feature for every outdoor security cam — you don’t want the darkness to hide any detail, especially if something like a break-in happens. While our top cam picks include various kinds of night vision, Wyze’s indoor/outdoor cam is particularly notable thanks to its Starlight Sensor, which can record night-time video in full color for users.

This wired cam includes all the other smart features that make Wyze’s cams a great pick, including a motion and sound sensor for alerts, detection zones, sensitivity settings that you can tweak for best results, and two-way audio for communication. It’s also compatible with Alexa and Google Assistant and is friendly with IFTTT if you’d like to set up complex routines based on the alerts the cam gives you.

The Wyze Cam v3 also has one of the best free video storage options around, with a 14-day cloud storage option for video clips at zero cost. There’s also an SD card slot for local storage if you prefer that method. While it’s an indoor/outdoor cam, you don’t need to worry: All the outdoor IP65 resistances are included for all types of weather.

Image used with permission by copyright holder

Lorex Dual-Floodlight V261LCD-E

Best outdoor camera for cold weather

.

You don’t need to worry about winter temperatures with this model, thanks to its IP65 rating that can endure -40 degrees Fahrenheit, suitable for even the coldest winters in the country. It also has particularly bright, 2,000-lumen, dual-LED floodlights (excellent for illuminating a large area at night) that can be triggered by motion cams. App controls also allow you to set manual start times and schedules for the lights.

That’s just the start of what this winter-ready Lorex cam can do: It also includes a two-way audio option, compatible with Alexa and Google Assistant devices, and the expected motion alerts for your phone. There’s no subscription plan or cloud sharing for this cam. Instead, it comes with a 32GB microSD card and port for free native storage. You can upgrade the model up to a 256GB card for extra space, which may be a good idea if you put the camera in a place that’s difficult to reach without a ladder, such as above a garage.

Best outdoor security cameras 2023

Read More : The 10 Best Video Management Softwares (VMS)

Image used with permission by copyright holder

Ring Spotlight Cam Pro

Best wireless outdoor security cam

.

Amazon’s update to the Ring Spotlight Cam is an excellent option for those who don’t want a full floodlight camera, but would still like lots of illumination for their porch, patio, or driveway. The surprisingly bright LED lights on either side of the cam can be set to light up along with the motion detection features.

There’s a little bit of everything packed into the Spotlight Cam Pro’s design, including basics like 1080p video, night vision, and two-way audio. But Ring also has some extras, like a siren you can sound, advanced 3D motion detection, and a “Bird’s Eye” view option that gives you a model for where a subject may have gone. We also like that it’s battery-powered with an option to plug into an outlet.

As with all Ring cams, you will really want a Ring Protect plan to enable video storage and video sharing, but otherwise, this is the most comprehensive wireless security cam we’ve seen to date.

Google

Google Nest Cam 2nd-gen (battery)

Best value security camera kit

.

Google’s Nest Cam benefits greatly from Google’s AI technology that can recognize people from cars, identify packages, and (with a subscription) do much more. While there is a wired version of this cam, we like the battery option for its versatility. We also love that it’s one of the few cams that offer free online video storage – three hours worth – for free, although a Nest Aware subscription does add other benefits.

Nest works with both Google Assistant and Alexa these days, so you don’t have to worry as much about which voice assistant you use. The cam itself is highly capable, with 1080p HDR video, night vision, zoom, two-way audio, and a variety of intelligent alerts. The snap-on mount is also a great way to make installation easy, no matter where you’re putting it. There’s even a feature to keep recording when the power goes down and save an hour of footage into local memory for review.

If the battery option isn’t really your thing, you do can purchase a weatherproof outdoor cable and wire the cam into place as well.

Arlo

Arlo Pro 5S 2K

Best premium outdoor security camera

.

The Arlo Pro 5S 2K doesn’t cut any corners. Featuring a camera that captures 2K video, a wide field of view, sleek design, and color night vision, few products can match its performance. Unfortunately, all those features come at a price, as the Arlo Pro 5S 2K clocks in at $250.

That makes it one of the most expensive security cameras on this list, but if money is no object, it deserves a closer look. Not only does it offer every feature found on our beloved Arlo Pro 4, but it also features Dual-Band Wi-Fi for simplified installation, SecureLink Connectivity that allows it to stay protected during power outages, and a Low Power Mode that offers a 30% boost to battery life.

But beyond those features, it’s eerily similar to its cheaper sibling. Still, if you need an outdoor security camera that’s as cutting-edge as possible, you can’t do better than the Arlo Pro 5S.

Image used with permission by copyright holder

Blink Wired Floodlight Camera

Best affordable floodlight camera

Blink makes plenty of great outdoor cameras, but few are as great as the Blink Wired Floodlight Camera. As one of the newest members of the Blink family, the Wired Floodlight Camera offers heaps of functionality despite its budget-friendly price of $99.

In case the name didn’t give it away, the Blink Wired Floodlight Camera isn’t just an outdoor camera – it’s also a floodlight. And a bright one at that, capable of producing 2,600 lumens of LED light. You’ll also benefit from motion detection, a wired connection that offers a constant power supply, and color night vision. Its design is a bit bulkier than others on this list, but that’s largely due to the massive floodlights that loom over the camera.

Anyone in the market for an outdoor camera that’s both affordable and powerful (and comes with shockingly bright floodlights) should give strong consideration to Blink’s new product. But if you’re looking for something with a more streamlined design, consider looking back at the Ring Spotlight Cam Pro mentioned earlier in our roundup.

Wyze

Wyze Cam Floodlight Pro

With the ability to capture 2.5K QHD footage and built with three adjustable floodlights that product 3,000 lumens of brightness, the Wyze Cam Floodlight Pro is a premium camera that doesn’t carry a premium price. It’s best for capturing large backyards or driveways (thanks to its powerful floodlights), but they can also be dimmed if you don’t need quite as much power.

Rounding out the package is automation that senses when the sun goes down, support for microSD cards to store footage locally, two-way audio, and compatibility with Alexa, Google Assistant, and IFTTT. Because it’s a floodlight, it’s a bit bulkier than most other products on this list, but it’s a great option if you like the idea of filming in 2.5K QHD and want to light up your yard when motion is detected.

Blink

Blink Outdoor 4

The Blink Outdoor 4 takes everything you loved about the Outdoor 3 and makes it even better. The two-year battery life is still here, but you’ll also benefit from a new 143-degree field of view, enhanced motion detection (including person detection), and improved night vision.

As usual, you’ll need to spring for a Blink Subscription Plan to access everything the camera has to offer, but since plans start at just $3 per month, it shouldn’t be a dealbreaker. Toss in a new design, a robust smartphone app, and full support for Alexa, and the latest member of the Blink family is mighty enticing.

Phil Nickinson / Digital Trends

Ring Stick Up Cam Pro

It’s a bit expensive, but you’re getting a lot of value out of this investment. The Ring Stick Up Cam Pro is designed to work both indoors and outside – giving it plenty of versatility. Along with its weatherproofing, the camera offers HDR video and films in 1080p, supports two-way audio, and is easy to install thanks to its wire-free setup.

One minor sticking point is its lack of a built-in privacy shutter. That might be an issue if you’re using it indoors, though you can quickly toggle alerts off and disarm the camera from the Ring smartphone app. But if you have it installed outside, you likely won’t miss the feature. You’ll also want to spring for a monthly Ring subscription to unlock additional features such as cloud saves and smart alerts.

Beyond those minor quirks, there’s not much to dislike about this powerful outdoor camera. Homes with other Ring products already installed will love how easy it is to sync the device with the rest of their smart home, and Ring newcomers will enjoy its high-quality images, simple setup, and generous 155-degree viewing angle.

Arlo Essential XL

The Arlo Essential XL Wireless Security Camera is all about battery life. Capable of running for up to 16 months before needing a recharge, it’s leagues beyond most other products on the market. That makes it incredibly appealing if you’re using it on a second property or plan to put it in a place that’s cumbersome to reach (as you’ll only have to take it down less than once per year).

It also benefits from support for 2K footage capture, color night vision, and a wide 130-degree viewing angle. You’ll likely want to pick up an Arlo Secure subscription so you can get improved smart alerts and 30-day video history – though it’s a bit more expensive than the competition at $5 per month.

The Essential XL is fully supported by the Arlo smartphone app, meaning you can easily set activity zones, view your alert history, or check out a live feed of your camera. And despite all these great features, the Essential XL is reasonably priced. To save even more cash, you can opt for the HD version, which offers all the same features, but ditches the 2K resolution for standard HD.

Frequently Asked Questions

Where do I place outdoor security cameras?

FBI crime data indicates that most (around 55%) home intruders try to get into homes through either the front or back door. So, you may want to have your security camera scoping out your doors. It’s also a good idea to cover other entry points, like back windows, that are hidden away where someone could break in without being seen.

Where exactly to mount your outdoor cameras, however, depends on your property and your individual needs. You may have a shed in the back that contains expensive lawn equipment, for instance, and you might want to place more focus on that area. Perhaps your neighborhood has experienced a few break-ins recently, and the intruders typically enter through the garage, so you want to cover your garage area.

How many security cameras do I need?

Typically, having at least two outdoor cameras is ideal, not including your video doorbell. If you have a video doorbell to watch your porch, combined with an outdoor security camera covering the front and back areas of your home, this should be sufficient. However, if you have a large property, live in an area where there’s a lot of property crime, or if you have vehicles or valuables stored on your property, you may want to add in an extra camera or two.

Can you use an indoor security camera outdoors?

No. An indoor camera does not have the necessary protection from the elements, so it won’t hold up outside. Some cameras are rated for indoor or outdoor use, and you can use those cameras outside. If you want to point your indoor camera out a window to watch the outdoors, you technically can do so. However, the camera’s features probably won’t work as well, and you’re better off just buying a cheap outdoor camera.

Can outdoor security cameras be used indoors?

Yes, although it’s not usually recommended because the cameras designed for outdoor use may not work optimally indoors. Again, you can opt for a camera that’s rated for both indoors and outdoors, like a dome camera.

Do all outdoor security cameras have two-way audio?

The short answer is no. Many wired outdoor cameras feature two-way audio, which allows you to speak back and forth with someone through the camera via an app on your phone, but not all outdoor cameras have this feature.

If two-way audio is something you’re interested in, consider doing research on which cameras have it, and of the ones that do, read up on which are better. Not all two-way audio is created equal — some companies do it well, while others do not. Keep in mind that cameras with two-way audio might cost a bit more than those that don’t feature the technology.

How well does night vision work on an outdoor security camera?

Night vision on cameras typically uses infrared light to illuminate dark images at night. Essentially, cameras with night vision use this technology to backlight images to help you see what’s happening in the field of view. Most outdoor security cameras feature night vision, but the quality varies from model to model.

If you’re looking for superior night vision, go for the Arlo camera listed above, or research night vision quality before making a purchase.

How well do outdoor security cameras detect motion?

Motion sensitivity in outdoor security cameras varies widely, but generally, the technology works well regardless of the model you choose. Most cameras, even inexpensive ones, do an excellent job of detecting motion, and, if the camera is connected to an app, it will send a motion alert to your phone. Most people find that motion settings on cameras are too sensitive, meaning that things like rain, bugs, or even bright sunlight can trigger an alert.

If you’re concerned about motion alerts, consider buying a camera that not only sends you motion alerts so you can monitor what’s happening on your property but also allows you to adjust the motion sensitivity so that small things aren’t triggering it all the time.

Can outdoor security cameras survive severe weather?

Most outdoor cameras have a rating of IP65 or higher, which means they are waterproof and can withstand someone spraying a hose on them. That usually (but not always) means that a camera with that rating can withstand extreme temperatures ranging from -40 to 110 degrees Fahrenheit or similar.

Cameras vary slightly in terms of survival in extreme weather, but anything with a rating of IP65 or higher will be fine for most climates. If you live in an extremely hot or extremely cold climate, you might want to consider a camera with a rating of IP66 or higher.

Do I have to pay for storage for an outdoor camera?

This depends a lot on the brand and the model. Generally, if a security cam has a memory card slot, you can use native storage without paying anything — it’s just a little trickier to manage. If you want video footage to be uploaded to the cloud for easier viewing and saving, you’ll often have to pay for it. Brands like Arlo and Ring only allow for free livestreaming video and require a plan if you want to save video for any length of time. Google is one of the best options here because its Nest cam offers a certain amount of free online storage without needing a subscription.

Is an outdoor security camera ever illegal?

It can be, although privacy laws haven’t entirely caught up with home security cams yet. Generally speaking, you can’t point a camera where people have the expectation of privacy. Pointing a cam at your porch and the street in front? Totally fine, it’s considered a public area. Pointing a camera so that it captures footage of your neighbor’s backyard or looks into their windows? Illegal, and you could get successfully sued for it.

.

<p>The post Best outdoor security cameras 2023 first appeared on NVR IPCAMERA SECURITY.</p>

The default password for your ONWOTE camera system is 123456 or 1234@abcd. If neither can work, please contact us at support@onwote.com to reset password.

1. Please install SearchoTool on your computer: http://onwote.com/Download#Tools

2. Please connect one of the NVR poe port to your computer directly.

3. Launch Searchool on your computer and search cameras.

4. Check in your camera and click Batch Reset to Reset your camera. Please wait for about 3 minutes until the camera finished resetting.

.

1. Please click the image of the dome camera and click  icon to go to the PTZ setup page.

2. Please click “Add” to add preset, click OK to save this preset. Then move your camera to another position to set the next preset.

3. Please set command for the camera according to the command list below.

Examples:

If you set preset 65, call 65 mean auto cruise from preset 1- preset7.

If you want to stop cruise, please add preset 96 and call 96.

If you set preset 87 and call 87, it means the camera will scan from left to right in low speed.

If you set preset 96 and call 96, the camera will stop cruising.a

ONWOTE Poe NVR Setup Guide

Read More : How to Connect POE NVR via the Onvif Protocol?

.

Step1: Turn off the NVR, unscrew it and remove the cover.

Step2: Unscrew the screws on the bottom of the NVR.

Step3: Unplug the 2 cable from the Hard drive

1. Connect the switches one by one, then connect the poe switch and NVR with the same router.

2. Change the cameras IP to the same segment with your router/enable DHCP of your cameras.

Please download the software SearTool and install it on your computer (connected to the same router):

http://onwote.com/Download#Tools

Please use SearchTool to detect the camera. Then check in the cameras and click Batch Edit IP. Click DHCP to enable DHCP of your camera or choose IP Batch Manually Setting to change the camera’s IP address to the same segment with your router manually.

e.g.: If the gateway of your router is 192.168.1.1, please change the camera’s IP to 192.168.1.X(X can be numbers from 50-100) and each camera has a different IP.

3. Add cameras on NVR

Please go back to the monitor which is connected with the NVR. Go to Settings—Camera—Add camera to add the cameras.

.

1. Connect the switches one by one, then connect the router and NVR with one of the switches.

2. Change the cameras IP to the same segment with the NVR’s LAN port.

Please go to Settings—Network—TCP/IP to check the IP of the NVR:

eg:

Please download the software SearchTool and install it on your computer (connected to the same router):

http://onwote.com/Download#Tools

Please use SearchTool to detect the camera. Then check in the cameras and click Batch Edit IP. Click DHCP to enable DHCP of your camera or choose IP Batch Manually Setting to change the camera’s IP address to the same segment with your NVR’s IP manually.

e.g.: If your NVR’s IP is 192.168.1.16, please change the camera’s IP to 192.168.1.X(X can be numbers from 50-100) and each camera has a different IP.

3. Add cameras on NVR

Please go back to the monitor which is connected with the NVR. Go to Settings—Camera—Add camera to add the cameras.

2.2. Tap on  and choose Scan code to add.

1.    Click one iamge and tap on  to view video in full screen.

2.

3.    Tap on the icon  and choose Super definition; Super definition mode requires higher internet speed.

4. 

  Click the playback button  to playback.

3. Please open SearchTools on your computer and search the cameras.

4. Please choose one camera, move your mouse to Preview, click on “e” to go to web client.

5. Your browser will open a page automatically, please login with admin and password 123456

6. Please go to Configuration—Image—OSD. Change Time Format and click on Save.

.

3. Please open SearchTools on your computer and search the cameras. Move your mouse to Preview behind the camera, click on“e“ to go to web client.

4. Your browser will open a web page automatically. Login the camera web page using Username: admin  Password: 123456

5. Choose Configuration—Event—Intelligent Detect, disable Draw rect in video, click on Save.

.

Here is the software for MAC: http://onwote.com/Download#Software#NVRTD…Series

Please download it and install it on your MAC. If you MAC doesn’t allow it to install the software, please go to System preference—Security& Privacy to change the authority.

Add device and view video on MAC

User: admin  Default Password: 123456

Choose Resource Management, click on Add

Click on Manually Add, change IP to Serial No.. Input the serial number and password of your system. Click OK to save device. (How to find the serial number?—Go to NVR monitor, choose Settings—Network—NAT, the serial number is below the QR code.）

You will go back to Resource Management page after you clicked OK. Please wait for 3-5 minutes, until the information of your device turns to black on this page, then go to Live View1*, double click on the Default area to view video.

.

Here is the new software for windows PC: http://onwote.com/Download#Software#NVRTD…Series

User: admin  Default Password: 123456

Choose Resource Management, click on Add

Click on Manually Add, change IP to Serial No. Input the serial number and password of your system. Click OK to save device. (How to find the serial number?—Go to NVR monitor, choose Settings—System—Information, the serial number is below the QR code.）

You will go back to Resource Management page after you clicked OK. Please wait for 3-5 minutes, until the information of your device turns to black on this page, then go to Video Preview1*, drag the camera to the right side one by one to view video.

.

.

a) Playback on NVR

1. Click Start  -> Playback, go to the NVR playback menu;

2. Select the date and time to start playback.

3. Click the time bar on the right side to playback the specific time period.

b)Playback on mobile app.

Open your app and click the playback icon  to playback.

Attention: Please use “VLC”player(https://www.videolan.org/vlc/index.en_GB.html) to play the video you back up from the nvr system.

1. Insert a USB disk into the NVR USB port. Click Start  -> Search and Backup;

2. Choose By Time. Click Set Backup Time.

3. Set backup time, click OK.

4. Click + inside the windows to add camera.

5. Click Backup to back up video to your USB disk.

Please pay attention to the position of the Waterproof O ring. The end connected with the camera must be higher than the end connected with the Ethernet cable.

.

.

.

<p>The post ONWOTE Poe NVR Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

3

.

See User for more information.

If you forgot your password, click Forgot Password in the login page, then follow the on-screen instructions to reset your password.

Alibi Vigilant IP Camera

2

Live View

3

To disable pixel calculation, click

.

3

To exit, click

5. Complete the action settings.

12

.

Click OK.

In a scan patrol route, the camera rotates from the start preset to the end preset in a specified gradient and direction.

13

.

NOTE!

This function is only available on certain models.

On the home page, click Playback.

18

.

Basic

MTU  |15OO

Port Type

Operating Mode  | Auto-negotiation

Click Save.

Click Save.

27

.

Port Mapping

Mapping Type

HTTP Port

RTSP Port

HTTPS Port

Save

Click Save.

6. 802.1x

Go to Setup > Network > Basic Config > 802.1x.

Enable 802.1x.

Choose a protocol type.

• EAP-MD5