How to Change the Password on a 5.0 UI IP Camera

.

IPCamera/Change Password 5.0 UI

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the current username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the System option from the drop-down list

3. Select Account on the left.
Then select the User tab at the top.
Click on the Edit (Pencil) icon to the right of the user account who’s password you want to edit

4. Enable the Change Password slider.
Then enter the current password in the Old Password field.
Enter the new password you want to change it to in both the New Password and Confirm Password fields.
Click on OK at the bottom

5. Once the new password is successfully changed, you will see “Modify User Succeeded” at the top

Dahua IP Camera 5.0 UI Setup

How to Set the Date and Time on a 5.0 UI IP Camera

.

IPCamera/Set Date and Time 5.0 UI

Description

This guide will show you how to set the Date and Time on a IMaxCamPro IP Camera with the 5.0 User Interface

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the System option from the drop-down list

3. Select General on the left.
Then select the Date & Time tab at the top.
To set the date and time without an NTP server, select Manual Setting. Then adjust the Time, Time Format, and Time Zone. (You can press Sync PC if you want to pull the time from the PC you are using. The Time Zone still needs to be set manually though.)

To set the date and time with an NTP server, select NTP. Then fill in the information for a functioning NTP server. (This will only work if the camera has access to the internet.)
For locations that use Daylight Saving Time, enable the slider below DST and select the dates and times that Daylight Savings starts and stops.
When you are done adjusting settings, select Apply at the bottom to save the settings.

How to Set the IP to Static on a 5.0 UI IP Camera

.

IPCamera/Set IP to Static 5.0 UI

How to Set IP Settings to Static on a 5.0 UI IP Camera

Description

This guide will show you how to set the IP settings to static on a ImaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the Network option from the drop-down list

3. Select TCP/IP on the left.
Click on Static next to “Mode”.
Then fill in the IP Address, Subnet Mask, Default Gateway, and DNS settings below that. (You can press the “Test” button if you want to see if that IP address is free on your network.)
When you are done adjusting settings, click on Apply at the bottom

How to Configure Recording to an SD Card on a 5.0 UI IP Camera

.

IPCamera/Configure Recording SD Card 5.0. UI

How to Configure Recording to an SD Card on a 5.0 UI IP Camera

Description

This guide will show you how to configure recording to an SD Card on a IMaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the Storage option from the drop-down list

3. Select the SD card from the list by enabling the radio button on the left.
Click on Format at the top to wipe all the data on the SD card and configure it for recording on this camera.

4. Click on the Home icon at the top left.
Select Record. (If you don’t see it on the main page, click the right circle at the bottom to switch pages.)

5. Select the Record Control tab at the top.
Adjust the settings on this page as desired:

When you are done adjusting settings, click on Apply to save the settings

6. Select the Time Plan tab at the top.
Adjust each Event Type on the weekly calendar.
When you are done adjusing the schedules, click on Apply to save your changes

7. Select the Storage tab at the top.
Adjust the settings on this page as desired:

When you are done adjusting settings, click on Apply to save the settings

How to Playback Video from an SD Card on a 5.0 UI IP Camera

.

IPCamera/Playback Recording SD Card 5.0. UI

How to Playback Video from an SD Card on a 5.0 UI IP Camera

Description

This guide will show you how to view recorded video footage from an SD Card on a IMaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Click on the Home icon at the top left.
Select Record. (If you don’t see it on the main page, click the right circle at the bottom to switch pages.)

3. Select the Search Video tab at the top.
Select the start date and time, and the end date and time on the left.
Then click Search below that.
All the recorded footage on the SD card in the time range will appear.
Double-click on the specific clip you want to play

4. Move the slider at the bottom to adjust the playback time.
Use the controls to play, pause, rewind, fast forward, or jump between clips

IPCamera/Password Reset 5.0. UI

.

IPCamera/Password Reset 5.0. UI

How to Reset the Password on a 5.0 UI IP Camera

Description

This guide will show you how to reset the password on a IMaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

Reset via Password Recovery in DMSS

1. Input the camera’s IP address into a web browser.
Click on Forgot password?

2. Click on OK to agree to use your email address in this process

3. If you setup a recovery email you will be brought to a page with a QR code on it. (If you didn’t setup a recovery email, skip to “Reset via Physical Button” at the bottom of this page.)

4. Open the DMSS app on a mobile device.
Tap on Me at the bottom.
Then select Tool Manager

5. Tap on Device Password Management

6. Use the mobile device’s camera to scan the QR code from Step 3 above

7. Once the QR Code has been successfully scanned you will see the following message

8. Check the email inbox for the email address that was registered for password recovery on this device.
Input the security code from that email in the Security code field.
Then click on Next

9. Enter a new password in the New Password and Confirm Password fields.
Then click on OK

10. The password will be successfully reset

Reset via Physical Button

Depending on the model of your IP Camera, there could be a physical reset button on the outside body of the camera, or inside the camera body.

1. Reset: Press the reset button for 10-20 seconds while the camera is connected to power.

IP Camera Basic Info

Important Safeguards and Warnings

1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.

2．Transportation security Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.

3．Installation

4．Qualified engineers needed All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment The NVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. This series product shall be transported, storage and used in the specified environments.

6. Accessories Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.

7. Lithium battery Improper battery use may result in fire, explosion, or personal injury! When replace the battery, please make sure you are using the same model! Before your operation please read the following instructions carefully.

Hardware Installation and Connection

Note: All the installation and operations here should conform to your local electric safety rules.

1. Check Unpacked NVR When you receive the NVR from the forwarding agent, please check whether there is any visible damage. The protective materials used for the package of the NVR can protect most accidental clashes during transportation. Then you can open the box to check the accessories. Please check the items in accordance with the list (Remote control is optional). Finally you can remove the protective film of the NVR.

2. About Front Panel and Rear Panel For detailed information of the function keys in the front panel and the ports in the rear panel, please refer to the User’s Manual included in the resource CD. The model label in the front panel is very important; please check according to your purchase order. The label in the rear panel is very important too. Usually we need you to represent the serial number when we provide the service after sales.

3. After Remove the Chassis Please check the data cable, power cable, COM cable and main boar cable connection is secure or not.

4. Important：Please turn off the power before you replace the HDD. You can refer to the User’s Manual for recommended HDD brand. Please use HDD of 7200rpm or higher. Usually we do not recommend a PC HDD. For detailed operation instruction, please refer to the User’s Manual included in the resources CD.

1. Use the screwdriver to loose the screws of the rear panel and then remove the front cover.

2. Put the HDD to the HDD bracket in the chassis and then line up the four screws to the four holes in the HDD. Use the screwdriver to fix the screws firmly to secure HDD on the HDD bracket

3. Connect to the HDD data cable to the main board and the HDD port respectively. Loosen the power cable of the chassis and connect another end of the power cable to the HDD port.

4. After connect the cable, put the front cover back to the device and then fix screws of the rear panel.

<p>The post Dahua IP Camera 5.0 UI Setup first appeared on NVR IPCAMERA SECURITY.</p>

.

As a world-leading video-centric AIoT solution and service provider, Dahua has a lot in store for us in terms of making camera installation simple, quick and user-friendly. Its recently launched 5E initiative focuses on user-centered design and aims to provide customers with efficient operations, cost reduction, security guarantees, and value enhancement. Easy Installation, one of Dahua 5E’s key components, refers to easy hardware installation and easy software deployment. For hardware, Dahua constantly optimizes their structural design, tools requirements, guide materials, process safety, etc., so as to improve the hardware’s ease of installation. For software, Dahua continuously optimizes their accessibility, flexibility, complexity, and correctness, thus enhancing the easy installation of software products.

.

Here are some of the highlights of Dahua 5E’s Easy Installation:

.

Dahua PTZ

.

.

Pain Points:

.

.

Solutions:

.

.

Application Scenarios: retail store, villa

Dahua Easy Installation Manual v1

Also Read : DAHUA IP Camera 5.0 UI Setup

Dahua Easy Installation Manual v1.

Dahua IPC

.

.

Pain Points:

.

.

Solutions：

.

.

Application Scenarios: cafe, parkland

.

Dahua ITC Cardan Bracket 8019

.

.

Pain Points:

.

.

Solutions:

.

.

Application Scenarios: highway, urban roads

.

HDCVI

.

.

Pain Points:

.

.

Solutions:

.

.

Application Scenarios:

.

.

What is Symmetric Encryption Algorithm?

.

In the modern stage of cryptography, the concept of key secrecy was introduced, giving rise to a new encryption algorithm paradigm called symmetric encryption algorithm.

.

Symmetric encryption algorithm, also known as single-key algorithm, is characterized by the use of an identical key for both encryption and decryption. They can be broadly classified into two major types: sequence ciphers (also known as stream ciphers) and block ciphers.

.

The core of stream cipher encryption is the key (also known as the seed key) that goes through a key stream generator to produce a key stream. This key stream is then XORed with the plaintext byte stream to obtain the ciphertext byte stream, encrypting one bit or one byte of the data stream at a time. The encryption process is illustrated in Figure 1.

.

.

Figure 1: Steam Cipher Encryption/Decryption Process

.

The core of block cipher encryption is to divide the plaintext data into fixed-length blocks and encrypt them using a key, resulting in ciphertext blocks. The plaintext is encrypted on a byte-by-byte basis. The process is illustrated in Figure 2.

.

.

Figure 2: Block Cipher Encryption/Decryption Process

.

Block cipher encryption is achieved by grouping the plaintext. To enhance the security in the encryption process and facilitate grouping, two key points are usually considered: encryption modes and padding modes. As for the specific selection of encryption mode or padding mode, it often depends on practical application scenarios, required security strength, and other factors.

.

The introduction of encryption modes mainly considers whether there should be any correlation between different blocks or whether each block should be encrypted independently. Different encryption modes represent different iteration methods used in the encryption process of plaintext blocks. Table 1 provides the advantages and disadvantages of using different encryption modes.

.

.

Table 1: Comparison of Several Encryption Modes

.

The introduction of padding modes mainly addresses the issue of plaintext that is not a multiple of the specified block size. In such cases, the remaining bits need to be padded to match the algorithm’s specified block size. During encryption, the plaintext is padded, and during decryption, the padding needs to be removed according to the same padding mode. Table 2 presents several common padding methods in block ciphers.

.

.

Table 2: Comparison of Several Padding Methods

.

Symmetric encryption algorithms encompass various algorithms, such as RC4 and ZUC for stream ciphers, and DES, 3DES, and AES for block ciphers. They are mainly used to address issues related to secure transmission, secure storage, and have a wide range of applications. However, these algorithms also have drawbacks, such as difficulties in key distribution and the inability to provide non-repudiation, which restrict their application in certain scenarios.

.

<p>The post Dahua Easy Installation Manual v1 first appeared on NVR IPCAMERA SECURITY.</p>

DAHUA IP Camera 5.0 UI Setup

How to Change the Password on a 5.0 UI IP Camera

Description

This guide will show you how to modify an account’s password on an IP Camera with the 5.0 User Interface. Please remember to change the passwords on all of the accounts to insure maximum security. Also, to ensure a higher level of security please use passwords with these requirements:

Example: HIgh91!?

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the current username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the System option from the drop-down list

3. Select Account on the left.
Then select the User tab at the top.
Click on the Edit (Pencil) icon to the right of the user account who’s password you want to edit

4. Enable the Change Password slider.
Then enter the current password in the Old Password field.
Enter the new password you want to change it to in both the New Password and Confirm Password fields.
Click on OK at the bottom

5. Once the new password is successfully changed, you will see “Modify User Succeeded” at the top

.

How to Set the Date and Time on a 5.0 UI IP Camera

Description

This guide will show you how to set the Date and Time on a Dahua IP Camera with the 5.0 User Interface

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the System option from the drop-down list

3. Select General on the left.
Then select the Date & Time tab at the top.
To set the date and time without an NTP server, select Manual Setting. Then adjust the Time, Time Format, and Time Zone. (You can press Sync PC if you want to pull the time from the PC you are using. The Time Zone still needs to be set manually though.)

To set the date and time with an NTP server, select NTP. Then fill in the information for a functioning NTP server. (This will only work if the camera has access to the internet.)
For locations that use Daylight Saving Time, enable the slider below DST and select the dates and times that Daylight Savings starts and stops.
When you are done adjusting settings, select Apply at the bottom to save the settings.

How to Set IP Settings to Static on a 5.0 UI IP Camera

Description

This guide will show you how to set the IP settings to static on a Dahua 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the Network option from the drop-down list

3. Select TCP/IP on the left.
Click on Static next to “Mode”.
Then fill in the IP Address, Subnet Mask, Default Gateway, and DNS settings below that. (You can press the “Test” button if you want to see if that IP address is free on your network.)
When you are done adjusting settings, click on Apply at the bottom

How to Configure Recording to an SD Card on a 5.0 UI IP Camera

Description

This guide will show you how to configure recording to an SD Card on a Dahua 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the Storage option from the drop-down list

3. Select the SD card from the list by enabling the radio button on the left.
Click on Format at the top to wipe all the data on the SD card and configure it for recording on this camera.

4. Click on the Home icon at the top left.
Select Record. (If you don’t see it on the main page, click the right circle at the bottom to switch pages.)

5. Select the Record Control tab at the top.
Adjust the settings on this page as desired:

When you are done adjusting settings, click on Apply to save the settings

6. Select the Time Plan tab at the top.
Adjust each Event Type on the weekly calendar.
When you are done adjusing the schedules, click on Apply to save your changes

7. Select the Storage tab at the top.
Adjust the settings on this page as desired:

When you are done adjusting settings, click on Apply to save the settings

How to Playback Video from an SD Card on a 5.0 UI IP Camera

Description

This guide will show you how to view recorded video footage from an SD Card on a Dahua 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Click on the Home icon at the top left.
Select Record. (If you don’t see it on the main page, click the right circle at the bottom to switch pages.)

3. Select the Search Video tab at the top.
Select the start date and time, and the end date and time on the left.
Then click Search below that.
All the recorded footage on the SD card in the time range will appear.
Double-click on the specific clip you want to play

4. Move the slider at the bottom to adjust the playback time.
Use the controls to play, pause, rewind, fast forward, or jump between clips

How to Reset the Password on a 5.0 UI IP Camera

Description

This guide will show you how to reset the password on a Dahua 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

Reset via Password Recovery in DMSS

1. Input the camera’s IP address into a web browser.
Click on Forgot password?

2. Click on OK to agree to use your email address in this process

3. If you setup a recovery email you will be brought to a page with a QR code on it. (If you didn’t setup a recovery email, skip to “Reset via Physical Button” at the bottom of this page.)

4. Open the DMSS app on a mobile device.
Tap on Me at the bottom.
Then select Tool Manager

5. Tap on Device Password Management

6. Use the mobile device’s camera to scan the QR code from Step 3 above

7. Once the QR Code has been successfully scanned you will see the following message

8. Check the email inbox for the email address that was registered for password recovery on this device.
Input the security code from that email in the Security code field.
Then click on Next

9. Enter a new password in the New Password and Confirm Password fields.
Then click on OK

10. The password will be successfully reset

Reset via Physical Button

Depending on the model of your IP Camera, there could be a physical reset button on the outside body of the camera, or inside the camera body.

1. Reset: Press the reset button for 10-20 seconds while the camera is connected to power.

.

<p>The post DAHUA IP Camera 5.0 UI Setup first appeared on NVR IPCAMERA SECURITY.</p>

As the latest technology of Meeso Communications, H.265X has the advantages of low bit rate and low cost, it will surely stand out in the new round of market competition and achieve a new leap.

Add H265X Camera to Recoder

Read More :

1. XMEYE NVR Installation Guide
2. How to connect an IP camera to the XMEYE JFEYE DVR?
3. XMEYE Devices Password Reset New Method

In this article, I will show you how to add H.265X compression standard Camera to Dahua, Kbvision video recorder.

1. Settings on Camera

To add a Camera to a Dahua, Kbvision DVR, you need to adjust a few parameters as follows:

2. Add Camera to Recoder

After you have set the parameters on the Camera, you can add the following to the Recoder:

3. Check results

Here’s what you get when you’ve added the recorder:

A. View Camera on Web Browser

• Watch the main stream live:

• Watch live substream:

• Review recording:

B. View Camera on TV screen (HDMI/VGA)

• Watch the main stream live:

• Preview sub-stream:

• Review recording:

C. View Camera on SmartPSS software (PC)

• Go to main stream:

• Preview sub-stream:

• Review recording:

D. View Camera on DMSS (Phone) software

• Live view of main stream, sub stream and replay recording:

Thanks for following this post!!!

<p>The post Add H265X Camera to Recoder first appeared on NVR IPCAMERA SECURITY.</p>

FAQ

Q: Which model of VTO (Outdoor Station) can work stand-alone and make a call notification to DMSS when call button is pressed?

A: DHI-VTO22202F-P, VTO2000A-S, VTO-2000A-2-S, VTO2111D-WP-S, VTO2000A, VTO2000A-2

Q: Can Apartment outdoor station (VTO1210C-X and VTO1210C-X-S and DHI-VTO4202F) work with DMSS App?

A: Yes, but it requires License for firmware customization. Please reach out to your local Sales Rep or Technical Consultant.

Q: How do I access device config page in VTH (indoor monitor) device?

A: From the homepage, press and hold Settings button for 6 seconds.

Q: What the difference between Transmission 1 and Transmission 2 on the network settings?

A: Mode 1: Multicast (multicast). The default is mode 1. Using multicast in a multicast network environment, the effect is best at this time
Mode 2: Unicast (TCP), If the router does not support multicast, the group call will have a black screen on VTH, then you can switch to unicast mode. In addition, if the network is particularly poor, you can also use this mode, because TCP has a retransmission mechanism to avoid frame loss.

How To Reset VTH Password via Computer

Description

This guide will show you how to reset the password of a Dahua VTH over a local network using VDP Config.

Prerequisites

• Windows PC.
• Dahua video intercom device on the same LAN as the PC
• Dahua Toolbox
• VDP Config

Video Instructions

Step by Step Instructions

1. Open DahuaToolbox and click Open next to VDPConfig

2. Discover the device in VDPConfig – How To Discover A Device Using VDPConfig

3. Select System Settings section

4. Click Device Password

5. Select the device(s) you wish to reset the password for on the left using the checkbox

6. Click Reset Password

7. Confirm the prompt

8. Use the dropdown box next to Reset Mode to select XML File

The default Export Path will be displayed where the XML will be saved. Click BrowsePath to modify this location.

Click Next to proceed

A prompt will confirm a successful reset and generation of the XML file.

9. Navigate to the location where the XML file was exported to. default file name is ExportFile.xml

10. Send the exported xml file as an attachment to the email address: support_rpwd@dahuatech.com

Then 2 or 3 minutes later, you will receive an email with the attached XML file

Save the results.XML file to the computer

11. In VDPConfig at the Reset Password interface click Open

12. Select the results.xml file click Open

13. Click Next

14. Once the reset is successful it will prompt to create a new password for the device.

Enter the new password and again to confirm

Click Complete

A green checkmark next to the device will confirm a successful password reset

How to Initialize Video Intercom using Configtool

Description

Initializing our Video intercom with Configtool simplifies and streamlines the process.

Configtool now handles the initialization phase and any IP address changes that need to be made. You no longer need to manually initialize our VDP devices manually

You can only Initialize the same type of Intercom at one time due to the password requirements

• VTHs requires a 6 character password (Numerical only)
• VTOs requires an 8 character password (Alpha Numerical combination)

Prerequisites

1. Configtool

2. Gen 3 Video Intercom devices

3. PC

Video Instructions

Read More : How To Dahua Video Intercom All Methods

Step by Step Instructions

1. Check the VTOs that you want to initialize and click on Initialize

Note:You can only Initialize the same type of Intercom at one time due to the password requirements

2. Click on Initialize

3. VTOs require at least an 8 character Alpa-Numeric password. Be sure to enter an email as this will be your method resetting the password if forgotten or lost. Click on Next to proceed

4. The green check marks will indicate that the devices have been successfully initialized. Click on Finish to complete the VTO initialization.

5. Select the VTHs you want to initialize and click on Initialize

Note:You can only Initialize the same type of Intercom at one time due to the password requirements

6. Click on Initialize

7. Enter a 6 Character Numerical password and an email as this will be your method to reset the password if forgotten or lost.

8. Green check marks indicates it was successfully initialized. Click on Finish to finalize the initialization.

Changing IP Addresses

Once devices are initialized you may want to change their IP Addresses to be on the same IP Scheme

1. To do that go to Search Setting

2. Enter the credentials if the device you want to modify and click on OK

3. The device list will refresh. Click on Edit for the device you want to edit

4. Enter the desired IP Address then click on OK to finalize

5. The green check mark will indicate that the IP address change was successful.

How to Setup and program Modules on DHI-VTO4202F-P-S2

Description

This guide will go over the wiring and programming of the modular accessories for our DHI-VTO4202F-P-S2

The only programmable Module in our product line is the Five-Button Call Panel.

Prerequisites

• DHI-VTO4202F-P-S2
• Module Accessories
• PC

Video Instructions

Step By Step Instructions

Physical Wiring of the Modules

You will always start at the DHI-VTO4202F-P-S2 OUT, then go to the next module on the IN port. Continue this pattern for the rest of the Modules.

Programming the Modules

1. Go to the DHI-VTO4202F-P-S2 WEBUI

2. Login to the VTO

3. Go to Local Settings

4. Click on the next available entry under Facade Layout

5. Select the Modules in the order you have them Physically wired

6. If you have multiple modules select the next empty slot. The order is labeled on the image below

7. The modules will populate once added

8. To program the Five-Button Call Panel select the empty box

9. Pick the Room Number you’d like to link it to

10. Select the next box if you have several Rooms you’d like to link

11. Select the second room number

12. In order to save the programming you need to click on Confirm

How to Forward calls to DSS Pro Client=

Description

This guide will go over the forwarding options for DSS Pro Client.

Each user created in DSS Pro will have its own unique Center Management number. Locate that number before

Prerequisites

• Video Intercom Setup with DSS Pro being the SIP Server

Video Instructions

Step by Step Instructions

1. Open DSS Pro Client and go to Video Intercom

2. Go to Call Management

3. Navigate over to Management Group Config

4. Select the User the Devices are setup with. In this guide we are using the “system” user. We will be using that number for forwarding the calls to the client.

5. Go to the VTH touch screen and enter the basic settings by tapping Setting

6. Go to Forward

7. Enter the number we located on step 4 and enable the status.

8. The calls will now be forwarded to DSS Pro Client

Video Intercom/SIP 2.0/How To Call DMSS

<p>The post Dahua Video Intercom GEN3 Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

Description

This section will show how to setup / use Two Way Talk function with Dahua devices.

Testing

• N42B2P-992108_DH_NVR4XXX-4KS2_MultiLang_V4.000.0000001.4.R.191129
  • 192.168.2.216 or 3H066BDPAZA7D00
  • 2-Way talk working in SmartPSS
  • Not working in gDMSS Plus on Android
  • Not working in iDMSS Plus on iPhone
• Audio input and output can only be used for 2-Way Talk on N42B2P, No Audio Recording

Computer Audio Setup Prerequisite (WebUI, SmartPSS and DSS Express)

• 

  Typical Computer Audio Interface (inputs/Outputs)

• 

  Microphone plugged into Microphone input (red) Speaker plugged into Output (green)

• 

  Both Microphone and speaker plugged into computer

Instructions

SystemUI Old

Prerequisites

• Dahua device that supports 2 Way Talk
• Microphone connected to Audio Input
• Speaker connected to Audio Output

Video Instructions

Step by Step Instructions

1. From Live View

2. Hover the mouse cursor near the top of the screen until the bar appears

3. Click the Microphone icon to begin Two Way Talk

4. The icon will highlight when Two Way Talk is active

5. Click the icon again to end Two Way Talk

SystemUI New

Prerequisites

• Dahua device that supports 2 Way Talk
• Microphone connected to Audio Input
• Speaker connected to Audio Output

Video Instructions

Step by Step Instructions

1. From Live View

2. Hover the mouse cursor near the top of the screen until the bar appears

3. Click the Microphone icon to begin Two Way Talk

4. The icon will highlight when Two Way Talk is active

5. Click the icon again to end Two Way Talk

WebUI Old

Prerequisites

• Dahua device that supports 2 Way Talk
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click to load the camera/channel from the Channel list on the left side of the screen

3. Click Start Talk to begin Two Way Talk

4. The button will remain highlighted while active

5. Click End Talk to stop Two Way Talk

WebUI New

Prerequisites

• Dahua device that supports 2 Way Talk
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click to load the camera/channel from the Channel list on the left side of the screen

3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk

4. The icon will remain highlighted while Two Way Talk is active

5. Click the icon again to end Two Way Talk

SmartPSS

Prerequisites

• Dahua device that supports 2 Way Talk
• SmartPSS
• Device added to SmartPSS
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. From the Main Menu of SmartPSS

Click Live View

2. Use the device tree on the left to load the channel/camera by dragging and dropping or double clicking

3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk

4. The icon will remain highlighted while Two Way Talk is active

5. Click the icon again to end Two Way Talk

DSS Express

Prerequisites

• Dahua device that supports 2 Way Talk
• DSS Express
• Device added to DSS Express
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1.

[Collapse]Mobile:iDMSS Plus & gDMSS Plus

Description

Prerequisites

Video Instructions

Step by Step Instructions

1. Two Way talk is done through the Live View of the device

From the main screen of the app

Select Live

2. Tap the + icon

3. Select the Device / Channel from the list

4. The device will connect and display Live View

Long press the microphone icon (for approximately 3 seconds)

The Voice Call window will appear

Tap to select which device in the list you wish to begin Two Way Talk with

The device will start to connect

5. Two Way talk has now started.

The microphone icon will remain highlighted while Two Way Talk is in use

6. Tap the icon again to end Two Way Talk

Bi-directional Talk (Two-Way Talk)

Description

Two-way audio enables you to receive and transmit audio through the IP camera.

Prerequisites

• IPC with audio capabilities

• External powered external mic.The IP Camera will not power the mic.

• Depending on some IPC models there might be a built in Mic. Please refer to Dahuasecurity.com for device specifications.

• If using an IPC capable of audio in and out, the NVR is an option. You can log directly into the IPC camera via Dahua WEB Service.

Video Instructions

Device-end to PC-end

Device Connection

Please connect the speaker or the pickup to the first audio input port in the device rear panel. Then connect the earphone or the sound box to the audio output port in the PC. Login the Web and then enable the corresponding channel real-time monitor. Please refer to the following interface to enable bidirectional talk.

Listening Operation

At the device end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the pc-end.

PC-end to the device-end

Device Connection

Connect the speaker or the pickup to the audio output port in the PC and then connect the earphone or the sound box to the first audio input port in the device rear panel. Login the Web and then enable the corresponding channel real-time monitor. Please refer to the above interface to enable bidirectional talk.

Listening Operation

At the PC-end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the device-end. 

For IPC

1. Log into IPC via webservice.

2. From the Setup Tab Select Camera ➞ Select Audio.

3. Check off enable ➞ select encode mode ➞ select sampling frequency. Repeat process for sub stream if being used.

4. Choose audio in type ➞ enable or disable noise filter ➞ You can adjust the speaker volume and mic level ➞ Be sure to click on save to save changes made.

5.On live view you can click on the audio icon to hear the audio feed of the camera location.

6.Click on the Mic icon to talk.

<p>The post How To Two Way Talk Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

What is CCTV Camera Software for PC?

The Software for PC is designed and developed by the CCTV camera manufacturers for their security solutions and products. This helps to connect as well as control the CCTV cameras on PC. Here we provide you with the top 25 CCTV Cameras Software for PC.

Application of these CMS

These CMS allows users to connect and maintain the CCTV system with your PC. With these applications, it becomes easier to get the live view of your residence, family, office premises and locality. With these applications, You can access the CCTV from remote locations as well.

it is now easier to connect and maintain on your security online through CCTV cameras. CCTV cameras are the best security solution to enhance the security of family members and others.

Importance of the CMS

These CMS helps to connect as well as control the CCTV cameras on PC. These CMS acts as an intermediary between PC and CCTV camera set up to help the user client to provide access to the user of CCTV camera on PC. We will highlight some of the important functions which can be performed by the application.

• Remote Access.
• Connectivity and control
• Video Surveillance.
• CCTV Video recording.
• Live monitoring on a different viewpoint.
• PTZ camera controlling.
• Remote playback of the recording.

List of Top 25 CCTV Camera Software for PC

Here we will discuss in detail about the application for PC. We provide you with the top 25 CMS. CCTV cameras are available for Windows and Mac operating systems. But some CCTV manufacturers do not provide the application for Mac user clients.

The download file of every CMS is in the compressed format and use WinRAR to extract the downloaded file. Besides, get better knowledge regarding the CMS installation and setup procedure by clicking the links.

The list of the best CMS is as follows:

1. IVMS 4500 by Hikvision

IVMS is also one of the best CMS developed by Hikvision Company. This CMS is the best application in the market to connect as well as control.

Hikvision is a global leader in the provider of security solutions and products. Emphasizing on the comprehensive and highly skilled R&D team, Hikvision manufactures a wide range of products. Hikvision has broadened its field to smart home tech, industrial automation, and automotive electronics industries to realise its long-term goal.

Hikvision products also render powerful business intelligence for clients, which enables more efficient transactions and greater commercial profit. Hikvision is a global leader of IoT solution provider with video as its core competency. Hikvision now has above 19,000 R&D engineers. The company yearly funds over 9% of its annual sales revenue to research and development for continued product innovation.

IVMS 4200 & Storage Server

The application is provided by the Hikvision company. The free download link is provided below. IVMS 4200 installation procedure is here as well, click on the link of IVMS 4200. Also, read the instruction of IVMS 4200 storage server as well.

Download IVMS 4200 For PC (Windows) V3.1.1.13

IVMS 4200 For PC (Windows) Download VS V1.0.0.13

Free Download IVMS 4200 AC V1 For PC  AC V1.0.1.13

Download Multi lang.  IVMS 4200 For PC  Multilingual Package V3.1.1

IVMS 4200 For PC Multilanguage for PC   Multilingual Package AC V1.0.1

Multi-language VS V1  IVMS 4200 For PC   Multilingual Package VS V1.0.0

Free Download IVMS 4200 for PC (MAC)   MAC V2.0.0.10

Download IVMS 4200 Storage Server for MAC

Download IVMS 4200 Storage Server for Windows

IVMS 4500

We have provided you with the IVMS 4500 for PC free download link below. Get the free download link. Read the installation procedure of IVMS 4500 here.

Download IVMS 4500 For PC (Windows)

Download IVMS 4500 for PC (MAC)

2. Smart PSS by Dahua

We provide you here with the Smart PSS by the Dahua Company. The Smart PSS helps connect the CCTV cameras on your PC. The CMS has many features and functions to help the user to connect, live stream, PTZ control, etc.

Zhejiang Dahua Technology Company is a leading company in video-centric smart IoT products and service provider. Dahua Technology Company renders end-to-end security solutions, products, and services to create values for city operations, corporate management, and clients.

Dahua solutions, products, and services are in over 180 countries and regions. Dahua Technology has 54 subsidiaries companies and branch offices globally in Asia, the Americas, Europe, Middle East, Oceania, and Africa.

Smart PSS

Here is the free download link of Smart PSS for Windows and Mac OS. Also, read the instruction of installation procedure in the article of Smart PSS.

Smart PSS For PC Free Download (Windows)

Smart PSS For Mac Free Download

3. NVMS 1000 by TVT

NVMS is one of the famous application developed for the TVT CCTV camera brand. This application provides you with many features to administer your CCTV camera on PC. The CMS is a free download here, through this you can get the following features:

• Remote Access
• PTZ Control
• Live stream
• Recording videos

TVT brand of CCTV camera is manufactured and distributed by the Shenzhen TVT Digital Technology Company established in 2004 and headquarter in Shenzhen, also listed on the SME board of Shenzhen stock exchange in December 2016.

As a worldwide best quality security solutions and products provider in more than 120 countries apart from China. Ranking as the most advanced company that enters into the abroad market in the video monitoring industry in China, TVT has established an independent and perfect marketing service system.

NVMS 1000

Here is the download link for NVMS 1000 for Windows and Mac OS. You can read about the installation procedure as well by clicking on the link of NVMS 1000.

NVMS 1000 for Windows 10

NVMS 1000 for Windows 10

NVMS 1000 for Mac OS

NVMS 7000

Get the free download as well as free installation procedure on NVMS 7000. This is available for Windows and Mac OS.

Free Download NVMS 7000 for PC (Windows)

NVMS 7000 for MAC Download Free

NVMS 2.1

We provide the latest application provided by the TVT known as NVMS 2.1 for Windows OS. This CMS is only available for the Windows operating system. Read the installation procedure of NVMS 2.1 here.

NVMS Lite 2.1 Download Free

4. KVMS Pro by CP PLUS

We provide you here KVMS provided by the CP Plus Company. KVMS Pro provides you with a wide range of functions and features as well. With this, you can connect CP Plus CCTV camera setup with the application on Windows and Mac.

CP PLUS is the global leader in high-level security and surveillance solution. Inspired by the vision and commitment to make surveillance easy and affordable, CP PLUS has begun a mission to make the world a safe and secure community.

As per the IHS Survey 2017, CP PLUS attains as the most recent and most active brand to enrol the club of Top 4 security companies in the world and Top 2 in Asia. CP PLUS attribute their path-breaking success to sound R&D leadership. CP PLUS products pass through stringent quality-control tests and are globally certified by the certificates such as UL, CE, FCC, etc.

KVMS Pro

Here is the CMS of KVMS Pro free download link for Windows and Mac OS. Read the instruction of installation procedure to install the KVMS Pro here.

Free Download KVMS Pro for PC (Orange)

Free Download KVMS Pro for PC (Blank)

Free Download Indigo CVMS for Mac

Indigo IVMS for Mac Free Download Free

5. EZStation by Uniview

Here we are about to discuss the EZStation developed by the Uniview. With this, you can connect as well as perform other functions to control the CCTV camera on your PC. With this, you can get many features such as live view, audio-video recording, etc.

Uniview is the global leader of IP video surveillance. First-ever company to introduce IP video surveillance in China, Uniview is the third-largest player in the video surveillance industry of China. In the year 2018, Uniview has the 4th largest global market share in the surveillance industry.

Uniview has a wide range of IP video surveillance products ranges from IP cameras, NVR, Encoder, Decoder, CMS Client, and app, covering several markets sectors including retail, building, industry, education, commercial, and city surveillance.

EZStation

Get here the download links of EZStation as well as the installation procedure of EZStation.

EZStation for PC (Windows 32 Bit)

EZStation for PC (Windows 64 Bit)

Download EZStation for MAC

6. Guard Station by Uniview

Guard Station is also another applicaton provided by the Uniview Technology Company. This CMS provides you with a variety of software to connect as well as control the Uniview CCTV cameras. This app provides functions such as PTZ Control, live streaming, video recording etc.

Guard Station

Here is the free download link of Guard Station for Windows and Mac OS. For the process to install the Guard Station read here.

Guard Station Software Download for Windows

Guard Station For MAC

7. Wansview Cloud by Wansview

Here we provide you with the Wansview Cloud which is designed and developed by the Shenzhen Wansview Technology company. It provides you with the capability to monitor your premises from remote locations on your PC. Wansview App for PC helps to connect as well as control the CCTV cameras.

Established in 2009, Wansview dedicated to product design, development technology innovation, and professional manufacturing processes in the field of security solutions and products. Wansview has clients in more than 100 countries in the world, such as the United States, Germany, Britain, France, Canada, Spain, Italy, Russia, Brazil, etc.

Wansview Cloud

We provide with the free download of the Wansview Cloud for Windows and Mac as well as the installation method.

Free Download Wansview APP for PC (V1.0.2)

Wansview APP for PC Free Download (V1.0.3)

Download Wansview APP for MAC Free(V1.0.3)

8. MI Home by Xiaomi

Here we provide the MI Home for PC to connect the Xiaomi’s MI Home CCTV cameras. This CMS is only available for Windows and Mac OS. The application provides remote access, live view and connectivity at any kind of network.

Xiaomi Inc. is a China-based company which deals in electronics and security products. This company has been taken good care of its clients and has a greater market share by providing the product at affordable prices.

MI Home

Now get the free download of MI Home for Windows OS. Also, read the instruction to install the MI Home on Windows.

MI Home Security Camera App Download For PC

9. V380 CMS By V380 Camera

We provide you with the free download of V380 which is designed and developed by the V380 Camera. V380 software helps you to connect the V380 CCTV cameras and helps to maintain surveillance over the home, locality and office premises. The app is available only in Windows OS.

V380 Camera is a most-advance company that engages in R&D, production, marketing, and service of the V380 Wifi Smart Camera, V380 IP Camera, and V380 360 Panasonic Camera. V380 Camera is one wifi camera brand in the company which aids to create intelligent terminal products.

V380 Software

Get the free download of V380 for Windows OS. Also, read the installation instruction of V380 software here.

Download V380 App for PC

10. PVMS By Panasonic

Here we will discuss the PVMS software developed by Panasonic Company. PVMS is one of the best CMS provided by the Panasonic Company. This is available only for the Windows operating system, this application helps to connect the CCTV cameras, provide remote playback, System configuration and video intercom.

Panasonic is a Japanese company established in 1935, with more than 259,000 employees. Panasonic deals with different kind of CCTV cameras and software. Panasonic has been one of the largest electronic appliances manufacturer in many countries.

PVMS software

The free download link of PVMS is available here. Also, get the installation guide by visit the article of PVMS.

Free PVMS Download for PC

11. Idmss Lite by Dahua

Idmss Lite software is also provided by the Dahua Technology company. Idmss Lite for PC is available for free download. The performs various functions such as live streaming, PTZ control, playback video, record video, snapshots, etc.

Idmss Lite

We have provided the instruction of installation in detail in the link of Idmss Lite here.

Free Download Idmss lite for PC

Free Download Idmss lite for Mac

12. DMSS by Dahua

Get here the DMSS by Dahua Technology Company. DMSS is the mobile application provided by the Dahua Company. This app is available for Windows and Mac user client, this CMS provides the user access to their Dahua CCTV cameras.

DMSS

Here is the free download of the DMSS as well as the procedure to install the DMSS software.

Free DMSS  for Windows 7/8/10 Download

Free DMSS for MAC Download

13. EZVIZ App by Uniview

EZVIZ App is also another application designed and developed by the Uniview Technology Company. This CMS helps to connect the as well as provides multilingual support to the users. This software is available for Windows as well as Mac OS.

EZVIZ App

Download free and also read about the installation procedure of EZVIZ App here.

Download Ezviz App For PC Windows 7/8/10

Download Ezviz App Video Plugin  Windows

Download Ezviz App Video Plugin

14. Velocity by HiFocus

HiFocus CMS is designed and developed by HiFocus Electrovision Company for its security solutions and products. HiFocus CMS helps to connect as well as control the CCTV cameras on your PC. HiFocus CMS for PC is the best security solution provided for the HiFocus CCTV system in the market.

Hi-Focus aims to bring the most advanced CCTV surveillance systems that can combine high volumes of data to produce essential information. The system provides users with advanced scrutiny, analysis, interpretation, and management. HiFocus assistance helps in the deployment of fast and intelligent security system solutions through a complete analysis based on the position and location of the device.

India’s trusted CCTV Company, Hi-Focus provides its customers with the best end-to-end video analytics solutions with the best surveillance cameras accompanying integrative proficiency to understand customer’s behaviour and other essential operational indices.

Velocity

Here is the free download of Velocity by the HiFocus, also read the installation procedure of Velocity.

Free Download Hifocus CMS Software for PC

Hifocus CMS Software for MAC Free Download

15. Smart Viewer By Hanwha (Samsung)

Hanwha Security Company has developed the Smart Viewer to connect the Hanwha CCTV cameras. The CMS provides you up to 72 channel of CCTV cameras view on screen, search recorded data by event type and date, export video and dual monitor support.

Hanwha Techwin America (Samsung Techwin) is a security technology company that has exhibited stable growth for the past 40 years and is part of the Hanwha Group. Hanwha Techwin is a Fortune 500 company and also one of the conglomerates in South Korea considered to be the largest.

The Hanwha Group has the expertise of over 60 years in the manufacturing of the video surveillance industry. The company has created many clients across the globe by providing the best quality product and services.

Smart Viewer

The link to download the Smart Viewer is free here. And visit the installation procedure article of Smart Viewer.

Download Smart Viewer For PC (Windows)

Download Smart Viewer For MAC

16. Wiseview by Hanwha (Samsung)

There is another software also to connect the Hanwha CCTV cameras also known as Wiseview. This provides you with some features as dual-screen assistance, live streaming, log administration, and user management.

Wiseview

Get the download of the Wiseview for free and installation guidelines as well.

Free Download Wiseview for PC (Windows)

Wiseview for MAC Free Download Free

17. Night Owl Connect By Night Owl

Night Owl Connect is designed and developed by the Night Owl Company for Night Owl CCTV cameras. This software has features such as IP device configuration, group management, main preview and log search functions. This feature helps the user to connect the CCTV cameras.

Night Owl Security Company is a leading innovator in the security technology industry. It is the fastest-growing manufacturer of security solution and products which offers the best value on the market. This is accomplished by designing and engineering products that are of high quality, user friendly, and affordable.

Night Owl Connect

Download free Night Owl Connect software for Windows and Mac OS. Read the guidelines for installation of Night Owl Connect.

Download Night Owl Connect for PC (Windows)

Download Night Owl Connect for MAC

18. Guarding Vision

Here is the Guarding Vision for PC developed by the Guarding Expert. This CMS helps us to connect as well as control the CCTV cameras on PC. This provides you ability to connect multiple CCTV camera brand on the same software. This application is available for Windows and Mac operating system. Guarding Vision helps us to detect motion as well.

Guarding Vision

Now download free Guarding Vision for Windows and Mac as well as learn about the installation procedure.

Free Download Guarding Vision for PC (Windows)

Guarding Vision for MAC Download Free

19. HiP2P Client by Dericam

Here we provide you with the HiP2P Client software for connecting and administering the Dericam CCTV cameras for PC. HiP2P Client is available for Windows and Mac user clients, this provides you with the ability to control Dericam CCTV cameras on PC.

Shenzhen Dericam Technology Company was formed and established in the year 2010. The company is developing, manufacturing, and marketing IP cameras and storage devices for home security field. Currently, Dericam has clients in the US, Australia, Netherlands, France, Poland, and other countries as well.

Dericam aims to innovate and develop its products to meet the demands of customers. Dericam continues to innovate and develop the quality of its products, enable everyone to enjoy the benefit of advanced technology. All series of products are CE & FCC certified.

HiP2P Client

Here get the download of HiP2P Client for free and read carefully the installation method of HiP2P Client.

HiP2P Client Software Download Free

HiP2P Client Software Download For MAC

20. YI IoT By YI Technology

Here we will discuss in detail about the YI IoT software which is designed and developed by the YI Technology Inc. YI IoT software helps you to connect the YI IoT camera and YI Dome Camera on your PC. This software provides you with cloud encryption and real-time push notification alerts. This is only available for Windows OS only.

YI Technology strives to deliver enhanced security and productivity to clients globally through high-quality hardware and cutting-edge. YI Technology is committed to rendering users with convenient and affordable technology emphasizing the latest and greatest Edge Computing features as well as highly advanced AI algorithms.

YI Technology develops and manufactures intelligent video and imaging solutions using the latest technology to solve real problems for its clients. YI Technology values its clients’ security and privacy and employs a 128bit end-to-end encryption to keep clients data safe.

YI IoT

Here get the free download now of the  YI IoT as well as the installation method for Windows OS.

Free Download YI IoT App for PC

21. YI Home By YI Technology

Here is another software developed by YI Technology known as YI Home. This also helps to connect as well as control the YI Home and YI Dome cameras on PC. This provides various features which are similar to YI IoT.

YI Home

Get the YI Home free download link and installation procedure guidelines.

Free Download YI Home App for PC (Windows)

YI Home App for Mac Free Download

22. DW VMAX By Digital Watchdog

Let us learn about the DW VMAX software which developed by the Digital Watchdog a leading CCTV camera manufacturing company. The DW VMAX is available for Windows, Mac and Linux OS. The has features such as PTZ control, live image quality enhancement, zoom in and out option on live streaming, multiple as well as single video export, 4/6/8/16 or 32 Channel view on PC and audio communication.

Digital Watchdog (DW) is a leader in surveillance cameras and associated video management, delivering complete video surveillance solutions for HD over Coax and HD IP CCTV systems of any size and for any application.

DW VMAX

Get the free download of DW VMAX for Windows, Mac and Linux OS here, read the installation procedure correctly of DW VMAX.

Free Download DW VMAX for PC Windows x64(Version – 4.1.0.31401)

DW VMAX For MAC Download Free x64(Version – 4.1.0.31401)

Download DW VMAX For Linux Free x64(Version – 4.1.0.31401)

23. CloudSEE by Jovision

We provide you with CloudSEE developed by the Jovision Technology Company. CloudSEE helps to connect the Jovision CCTV cameras. This provides video recording on a live camera, play recorded videos., assistance real-time playback when preview, playback supports quick, slow, and by frame modes, local snapshots, and recordings and files stored locally.

Jovision Technology Company established in the year 2000, is the world’s preeminent manufacturer and distributor of video surveillance products and solutions. Jovision is recognised in developing and manufacturing highly advanced video surveillance products.

Following are the new main researched and developed product of Jovision Company, smart IP cameras, WiFi cameras, NVR, DVR, HD Analog cameras, CMS video management software, alarm systems, encoders, decoders, and CCTV modules. Jovision’s expert engineers also provide customized security solutions.

CloudSEE

Here is the free download of CloudSEE for Windows OS because the CMS is only available for Windows OS. Also, read the installation procedure carefully of CloudSEE.

Free Download CloudSEE For PC

24. SwannView Link by Swann

We will discuss in detail about the SwannView Link developed by Swann Communication is the best CMS to connect the Swann CCTV cameras. SwannView Link helps you to connect the CCTV cameras on your PC. This provides brightness adjustment, live view and application user management.

Swann has always been a leader. Begins its business from the Swann’s personal house basement in Melbourne, Australia. Swann has established and created its clients in the USA, Canada, Australia, UK, Hong Kong and China and also in other 40 countries.

Swann provides surveillance and monitoring technology by introducing its new product such as wireless HD cameras, video surveillance recording systems and cameras, and also 4K Ultra HD, 3-5 Megapixel HD, and 1080p HD camera setup with temperature and motion sensors technology.

SwannView Link

Get the download free now of SwannView Link, read the instruction of installation of SwannView Link.

Download SwannView Link For PC (Windows)

Download SwannView Link For PC (MAC)

Download SwannView Plus For PC

25. Amcrest View Pro by Amcrest

Here is the Amcrest View Pro designed and developed by the Amcrest Company. This application helps to connect the Amcrest CCTV cameras on your PC. This CMS provides features such as user management, live streaming, playback recording, etc.

Amcrest products are advance designed remote monitoring and surveillance systems which build a bridge between powerful capabilities, ease of use and affordability. With high quality and robust design, Amcrest cameras allow the user to securely monitor their residence, office premises etc. Amcrest camera systems are designed to record and produce live video and audio to the user anywhere in the world.

Amcrest is a top security products manufacturer as well as distributor servicing many clients worldwide primarily across the United States, Canada, the UK, Germany and France. Amcrest provides after-sales support and local warranty services to all of our customers in their local countries for free of cost.

Amcrest View Pro

Here is the free download of Amcrest View Pro free download and installation guidelines.

Free Download Amcrest View Pro for PC (Windows)

Amcrest View Pro for MAC Free Download

Conclusion

Here we have discussed some of the top 25 CCTV camera software for PC. These are the best softwares to control the CCTV cameras on your PC. The softwares are available to download free.

This CCTV software provides you with many features like a live recording, video snapshot, audio-video display, motion detection, night vision, and alarm notifications as well. With these CMS it easier to connect as well as manage the CCTV cameras.

We have discussed in detail about the “Top 25 CCTV Camera Software for PC“ in detail with the free download link of the software as well. For more information and query you can contact us by commenting on the comment section below of the article.

<p>The post Top 25 CCTV Software Free first appeared on NVR IPCAMERA SECURITY.</p>

Description

How to setup Dahua Doorbell DHI-DB11 from DMSS App.

Prerequisites

• DHI-DB11
• DMSS Mobile App
• Dahua Online Account

Video Instructions

Step by Step Instruction

 DMSS

Step by Step Instructions1. Open DMSS App then go to Me menu. If the DMSS are not logged, it is required to do so before proceeding to adding the device.

 For How-to instruction on creating Dahua Online Account, Click Here.

2.Tap on  Home, and tap on + button on the top right hand corner, then choose SN/Scan.

3. Scan the QR code of the device that located on the back of the doorbell.

4. For new device that has not been initialized, Tap on … icon on the top right corner and then tap on Switch to AP configuration to setup Wifi connection.

5. Make sure your device is connected to the power and the indicator light flashes blue. Tap on Next.

6. When a prompt comes up, Tap onJoin to continue.

7. Setup the device password.

8. Choose the WIFI network the DB11 will be connecting to.

9. Enter Wifi password and tap on Next to continue the setup.

10. Enter the user-defined Device Name. In the example, we use Dahua Doorbell.

11. Finalize the settings to complete the setup.

12. Select the existing door chime you have at the location. Electronic Chime or Mechanical Chime, or if you are using DS11-USA Wireless door chime, you should see this pop-up under Wireless Chime. Then tap on Save on the bottom.

13. Once setup is complete, you will be able to view the live view of your Doorbell Camera.

14. Go to Me > General. Make sure that the Notification Switch is enabled and now you should receive a call notification when doorbell button is pushed.

 iDMSS/gDMSS

Step by Step Instructions

1. Open iDMSS or gDMSS then scan the QR code on the DB11.

2. If the iDMSS or gDMSS are not logged, it is required to do so before proceeding to adding the device.

3. Follow the on-screen instructions and wait for the status light before pressing button located on the back of the DB11 device. After the device is pressed, a vocal message will be heard.

4. When a prompt comes up, press “Join” to continue.

5. Setup the device password.

6. Choose the WIFI network the DB11 will be connecting to.

7. Follow the on-screen instructions to continue with the setup.

8. Enter the user-defined Device Name. In the example, we use “DB11”.

9. Finalize the settings to complete the setup.

10. Go to “Me”

11. Make sure that the Notification Switch is enabled and now you should receive a call notification when doorbell button is pushed.

<p>The post How to setup Dahua Doorbell first appeared on NVR IPCAMERA SECURITY.</p>

Description

This section will show how to setup / use Two Way Talk function with Dahua devices.

Testing

• N42B2P-992108_DH_NVR4XXX-4KS2_MultiLang_V4.000.0000001.4.R.191129
  • 192.168.2.216 or 3H066BDPAZA7D00
  • 2-Way talk working in SmartPSS
  • Not working in gDMSS Plus on Android
  • Not working in iDMSS Plus on iPhone
• Audio input and output can only be used for 2-Way Talk on N42B2P, No Audio Recording

Computer Audio Setup Prerequisite (WebUI, SmartPSS and DSS Express)

• 

  Typical Computer Audio Interface (inputs/Outputs)

• 

  Microphone plugged into Microphone input (red) Speaker plugged into Output (green)

• 

  Both Microphone and speaker plugged into computer

Instructions

SystemUI Old

Prerequisites

• Dahua device that supports 2 Way Talk
• Microphone connected to Audio Input
• Speaker connected to Audio Output

Video Instructions

Step by Step Instructions

1. From Live View

2. Hover the mouse cursor near the top of the screen until the bar appears

3. Click the Microphone icon to begin Two Way Talk

4. The icon will highlight when Two Way Talk is active

5. Click the icon again to end Two Way Talk

SystemUI New

Prerequisites

• Dahua device that supports 2 Way Talk
• Microphone connected to Audio Input
• Speaker connected to Audio Output

Video Instructions

Step by Step Instructions

1. From Live View

2. Hover the mouse cursor near the top of the screen until the bar appears

3. Click the Microphone icon to begin Two Way Talk

4. The icon will highlight when Two Way Talk is active

5. Click the icon again to end Two Way Talk

WebUI Old

Prerequisites

• Dahua device that supports 2 Way Talk
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click to load the camera/channel from the Channel list on the left side of the screen

3. Click Start Talk to begin Two Way Talk

4. The button will remain highlighted while active

5. Click End Talk to stop Two Way Talk

WebUI New

Prerequisites

• Dahua device that supports 2 Way Talk
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click to load the camera/channel from the Channel list on the left side of the screen

3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk

4. The icon will remain highlighted while Two Way Talk is active

5. Click the icon again to end Two Way Talk

SmartPSS

Prerequisites

• Dahua device that supports 2 Way Talk
• SmartPSS
• Device added to SmartPSS
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. From the Main Menu of SmartPSS

Click Live View

2. Use the device tree on the left to load the channel/camera by dragging and dropping or double clicking

3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk

4. The icon will remain highlighted while Two Way Talk is active

5. Click the icon again to end Two Way Talk

DSS Express

Prerequisites

• Dahua device that supports 2 Way Talk
• DSS Express
• Device added to DSS Express
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1.

Mobile:iDMSS Plus & gDMSS Plus

Description

Prerequisites

Video Instructions

Step by Step Instructions

1. Two Way talk is done through the Live View of the device

From the main screen of the app

Select Live

2. Tap the + icon

3. Select the Device / Channel from the list

4. The device will connect and display Live View

Long press the microphone icon (for approximately 3 seconds)

The Voice Call window will appear

Tap to select which device in the list you wish to begin Two Way Talk with

The device will start to connect

5. Two Way talk has now started.

The microphone icon will remain highlighted while Two Way Talk is in use

6. Tap the icon again to end Two Way Talk

<p>The post Two Way Talk Setup for XVR NVR DVR first appeared on NVR IPCAMERA SECURITY.</p>

Description

Follow this guide to setup your mobile device with our app!

Prerequisites

• Requires iOS 7.0 or later. Compatible with iPhone, iPad, and iPod touch
• Requires Android 3.0 and up

Video Instructions IDMSS/GDMSS version

Step by Step Instructions IDMSS/GDMSS version 3.50.000

1. From the home screen select “Camera”

2. Select the Menu Icon -> Select playback.

3. Select the + Icon to for a device to playback.

4. Choose a beginning date and time -> end date and time.

5. Toggle on to choose record type. ( All, Regular, Alarm, and Motion Detect)

6. Select a device from the list to playback.

IDMSS/GDMSS Version 3.40.003

Video Instructions Version 3.40.003

Step By Step Instructions IDMSS/GDMSS Version 3.40.003

1. From the Live View page tap on the top left hand corner. This bring you to the home page.

2. In the Home page tab the Playback option.

3. In the Playback screen, tap on the first box for video.

4. This will bring up the device list menu.

a. Determine and select the start time for the playback

b. Determine and select the ending time for the playback

5. Now select the camera

6. The camera will come up with the playback.

Here you can maneuver the time line to get the point that you want to watch.  With the play buttons you are able to Fast forward, slow down and go the next segment of video.

<p>The post How to Playback a video file via mobile app first appeared on NVR IPCAMERA SECURITY.</p>