Lorex Fusion: Download the Lorex App

The following article provides instructions for downloading the Lorex App and connecting your Lorex Fusion Collection recorder to the app.

Prerequisite

Before you start, your Fusion recorder must be powered on and connected to your router using the included Ethernet cable. For Basic System Setup instructions, refer to your Fusion recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

Download the Lorex App

Once your Fusion recorder has connected to the Lorex App, complete the final Fusion steps by connecting your Fusion Wi-Fi cameras and accessories.

For setup instructions using the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

For setup instructions using the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

Lorex Fusion: Frequently Asked Questions

The following frequently asked questions (FAQs) provide more information about your Lorex Fusion Collection. Where applicable, the FAQ includes links to articles where you may find more information.

Lorex Fusion Troubleshooting FAQ.

What is Lorex Fusion?

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both Lorex Wired and Fusion Wi-Fi Cameras, Doorbells, Floodlights, and Sensors to one system. Lorex Fusion Wi-Fi Cameras and Accessories can connect to one recorder for continuous 24/7 recording and local, secure storage (up to 10TB). Everything can be accessed from your Lorex App for easy control of all devices.

.

Why do I get an offline message and a blank screen for the (B463AJ) 2K battery doorbell’s channel on the Fusion recorder?

Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

Can my Battery Video Doorbell record continuously?

To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

.

Which recorders are part of Fusion?

For a list of Lorex Fusion Recorders, please refer to the Product Compatibility Chart.

.

Can I connect all Lorex Wi-Fi Cameras and Accessories to my Fusion recorder?

Only Lorex Fusion Compatible Wi-Fi Cameras and Accessories can connect to Lorex Fusion Recorders.

.

Which Lorex Wi-Fi Cameras and Accessories are part of Fusion?

See the following list of Lorex Fusion Wi-Fi devices:

.

Should I update my Lorex Fusion recorder’s firmware?

It is recommended to update your system firmware to the latest version to ensure remote connectivity and to support newly added Fusion Wi-Fi devices.

.

Does my Lorex Fusion recorder require a network setup?

Yes, a network setup is required to connect Fusion Wi-Fi cameras and accessories to your Fusion recorder. Ensure you connect the included Ethernet cable to your recorder’s LAN port and your router.

.

Does it matter which router I use?

Yes, due to its strong signal, the dual-band router is suitable for high resolution video recording and for connectivity between devices. Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are all connected to a dual-band router (2.4 GHz/5 GHz bands).

.

How many Lorex Fusion Wi-Fi Cameras and Accessories can I connect to my Fusion recorder?

This depends on your Fusion recorder and the number of Fusion Wi-Fi channels it comes with. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

What is a Fusion Wi-Fi channel?

A Fusion Wi-Fi channel is the channel you use to add a single Fusion Wi-Fi camera to your system. A 16-channel security system with 8 PoE ports/channels (for wired camera connection) and 8 Fusion Wi-Fi channels means that 8 Fusion Wi-Fi cameras and accessories can connect to the entire system.

Note: Fusion Wi-Fi channel’s are only available on certain Lorex Fusion recorders. For a list of Fusion recorders, see the Product Compatibility Chart.

.

How many Fusion Wi-Fi channels are on my Lorex Fusion Recorder?

The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I setup my Lorex Fusion system?

Complete your Fusion setup in the following order:

After connecting your Fusion system, ensure you adjust your Fusion settings.

.

Are there Fusion setup tutorial videos?

For a video walk-through of the Fusion setup with the new local UI (N845, N846, N847, N864, D863, D881 Series), please watch here.

For a video walk-through of the Fusion setup with the previous local UI (N841, N842, N843, N844, N861, D862, D871 Series), please watch here.

.

How do I setup my Lorex Fusion recorder and wired cameras?

For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Series Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

For full setup instructions, please click on the article corresponding with your model number.

.

Which password should I enter to connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

Enter the same password that you created in the Lorex App when setting up your Fusion Wi-Fi device.

.

What is continuous recording?

Once your Lorex Fusion Wi-Fi camera connects to your Fusion recorder, your camera’s recording settings are automatically set to continuous. This means that your Fusion Wi-Fi camera will record 24/7 or for the entire duration of the recording schedule onto your Fusion recorder’s hard drive. It is worth noting that recordings on the camera are limited due to the size of its onboard storage, while recordings on the recorder are extensive (3TB to 10TB). Continuous recording captures everything in the background, and you can playback to catch anything you missed.

.

Do all Lorex Fusion Wi-Fi cameras record continuously?

No, to conserve battery life, battery-operated video doorbells do not record continuously (24/7).

.

How do I set my Lorex Fusion Wi-Fi camera to continuous recording?

After Fusion setup, your Wi-Fi camera is automatically set to Continuous recording. To adjust your camera’s recording settings, login to your recorder and navigate to the devices menu. For instructions, please see the article Lorex Fusion: Adjust Settings.

Note: Battery-operated video doorbells do not record continuously (24/7). Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

How come I’m receiving duplicate notifications in the Lorex App?

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

.

After Fusion setup, where is my Lorex Fusion Wi-Fi camera’s video footage being stored?

Your Lorex Fusion Wi-Fi camera saves recorded motion detection videos onto the local microSD card (not always included). Once you’ve connected your Fusion Wi-Fi camera to your Fusion recorder, your camera’s recording settings is automatically set to 24/7 Continuous recording, and all recorded video is stored on your recorder’s extensive hard drive (up to 10TB).

.

What features are supported in my Fusion recorder vs. the Lorex App?

Please see the following list of features supported in either your Fusion recorder and/or the Lorex App:

.

Can I use my web browser to access my Lorex Fusion Wi-Fi camera?

You can only access your camera on the Lorex App, recorder, or on the Lorex Cloud Client.

.

When modifying the password in the Lorex Cloud Client, which password should I enter?

Enter the password for your Wi-Fi camera or accessory created in the Lorex App during setup.

.

Where can I order the Lorex Fusion Collection?

To order, go to lorex.com.

Lorex Fusion: Troubleshooting

The following article provides some troubleshooting tips for setting up your Lorex Fusion Collection.

.

My Fusion Wi-Fi camera or accessory is not appearing in the device list.

.

My Fusion Wi-Fi camera or accessory is not connecting to my Fusion recorder.

• Give your Fusion Wi-Fi camera or accessory a few minutes to establish a connection.

• Check to see if your Fusion recorder has the most up-to-date firmware. New Local UI: Login to your recorder and navigate to System > Update & Reset > Upgrade, then click Check for Updates.  Previous Local UI: Login to your recorder and navigate to Main Menu > Information > Update/Reset > Update, then click Check for Updates. For instructions on updating your recorder’s firmware through USB, see the article How to manually upgrade the firmware of your recorder.

• Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are powered on.

• The same password created for your Fusion Wi-Fi camera or accessory in the Lorex App must be entered in your Fusion recorder. If you have forgotten the password, then reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• (Applies to the previous local UI only) If your password for your Fusion Wi-Fi camera or accessory is entered incorrectly in your Fusion recorder, then your Wi-Fi device will lock itself. Reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• Ensure that you are entering the password for your Fusion Wi-Fi camera or accessory created in the Lorex App, and not the Lorex App account password. Those are two separate passwords.

• Ensure that your Fusion Wi-Fi camera or accessory is connected to a dual-band router (2.4 GHz/5 GHz bands).

• Ensure that you are connecting the Fusion Wi-Fi camera or accessory to an available Fusion Wi-Fi channel, and not a Wi-Fi channel that already has a Wi-Fi device connected to it.

.

I don’t know the password for my Fusion Wi-Fi camera or accessory.

If you don’t know the password for your Fusion Wi-Fi camera or accessory, then you will need to reset the device and connect it to the Lorex App again.

To reset your Fusion Wi-Fi camera or accessory:

.

I’m receiving duplicate notifications in the Lorex App.

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N910 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi Cameras and Accessories to your N910 Fusion recorder.

.

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both wired and Wi-Fi cameras, doorbells, floodlights, and motion sensors to one system. All Fusion compatible Wi-Fi cameras and devices connect to one recorder for continuous 24/7 recording and private local storage. Access everything from the Lorex App for easy control of all devices.

Note: To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

For any connection issues, see the article Lorex Fusion: Troubleshooting.

.

Part One — Wired Setup

Setup your Fusion recorder and wired cameras. For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

Important: Network setup is required for your system — use the included Ethernet cable to connect your recorder to your router.

.

Part Two — Connecting your Lorex Fusion Wi-Fi Camera

Connect your Lorex Fusion Wi-Fi Camera to the app and then from your recorder scan your network to add it.

.

Option A — Connecting Your New Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi Cameras and Accessories onto Fusion Wi-Fi channels on the recorder.

To connect your New Lorex Fusion Wi-Fi Camera to the recorder:

Note:

.

Option B — Connecting Your Existing Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi cameras and accessories onto Fusion Wi-Fi channels on the recorder.

Note:

To enable remote viewing for the mobile app, you will need to:

To connect your Existing Fusion Wi-Fi camera to the recorder:

1.From the Live View display, click the pair icon  in the center of the Fusion Wi-Fi channel’s screen.

Note: It may take a few minutes for your Lorex Fusion Wi-Fi Camera’s video feed to appear.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N845, N846, N847, N864, D863, D881 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the new local UI only. For Fusion instructions that apply to the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note: You can add one Wi-Fi camera or accessory to one Fusion Wi-Fi channel. The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

2.From the Live View display, click the pair icon  from the center of the Fusion Wi-Fi channel.

Note: If your Lorex Fusion recorder and Fusion Wi-Fi camera share the same password, then the devices will automatically connect without entering the password.

.

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N841, N842, N843, N844, N861, D862, D871 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the previous local UI only. For Fusion instructions that apply to the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the Fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note:

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Adjust Settings

The following article provides instructions for adjusting your Lorex Fusion Collection settings.

.

Turn off duplicate notifications

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder.

To turn off duplicate notifications:

2.Under your Fusion recorder, swipe left to find your Fusion Wi-Fi camera or accessory.

3.Tap on your Fusion Wi-Fi device’s notification icon .

.

.

Adjust the recording settings for your Fusion Wi-Fi camera or accessory

After Fusion setup, your Lorex Fusion Wi-Fi camera’s recording settings will automatically adjust to Continuous, recording 24/7 directly to your recorder’s hard disk drive.

To adjust the recording settings (new local UI):

To adjust the recording settings using the previous local UI, navigate to Main Menu > CAMERA > Recording > Recording and follow the same steps as above.

.

Set the recording schedule for your Fusion Wi-Fi camera or accessory

You can set a custom recording schedule according to your needs. For example, you can set the system to record continuously during business hours and record on motion detection only outside of business hours.

• Click-and-drag on each day to customize the recording schedule. The schedule is set up as a grid, with each block representing two hours.

• Click  beside 2 or more days to link schedules (). This allows you to quickly change multiple schedules at once.

• To make fine adjustments to a schedule, click . This will allow you to set exact start and end times for a schedule.

• To disable all recording of the selected type on the selected day, click .

To set the recording schedule using the previous local UI, navigate to Main Menu > STORAGE > Schedule and follow the same steps as above.

.

Link sensors to cameras

Once you’ve completed the Fusion setup, you can link motion and door/window sensors to any compatible camera, so that when the sensors are triggered the linked automatically cameras record.

.

To learn more about using your Lorex Fusion system, visit the Fusion page or refer to the Lorex Fusion: Frequently Asked Questions article.

.

<p>The post Lorex Fusion Troubleshooting FAQ first appeared on NVR IPCAMERA SECURITY.</p>

Chapter 1 Startup

1.1 Activate Your Device

For the first-time access, you need to activate the video recorder by setting an admin password. No operation is allowed before activation. You can also activate the video recorder via web browser, SADP or client software.

Before You Start

Power on your device.

Steps

1. Select a language.
2. Click Next.
3. Input the same password in Password and Confirm Password.

/¡K Warning

Strong Password recommended-We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

1. Activate network camera(s) connected to the device.

• Check Use Device Password as Default to use the device password to activate the inactive network camera(s).
• Enter a password to activate network camera(s).

1. Optional: Set an email address for password resetting. When you forget your password, you can reset it by email.
2. Check Enable.
3. Enter an email address.
4. Click Activate.

User Name admin

Password

Weak

Confirm Password

Camera Activation Password 0 Use Device Password as Default

Email to Reset Password 0 Enable

Email Address

Hilook 4K NVR Device Complete Guide

Read More :

1. Hilook Hikvision Password Reset NVR/DVR/IPCAM NEW
2. Hilook Firmware Software Tools
3. How to Find The Encryption/Verification Code? Hilook Hikvision Annke

Figure 1-1 Activation

1.2 Login

• • 1. Set Unlock Pattern

Admin user can use the unlock pattern to login. You can configure the unlock pattern after the device is activated.

Steps

1. Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done.

03 Note

• The pattern shall have 4 dots at least.
• Each dot can be connected for once only.

1. Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully.

Unlock Pattern

Set Unlock Pattern

Release your finger when done

Figure 1-2 Set

Set Unlock Pattern

Draw pattern again to confirm

• • 1. Log in via Unlock Pattern

Steps

1. Right click the mouse on live view interface.

Figure 1-3 Draw the Unlock Pattern

2. Draw the pre-defined pattern to unlock to enter the menu operation.

nXlNote

• If you have forgotten your pattern, you click Forgot My Pattern or Switch User to log in via password.
• If you have drawn the wrong pattern for more than 5 times, the system will switch to the normal login mode automatically.
  • 1. Log in via Password

If your video recorder has logged out, you must login before operating the menu and other functions.

Steps

1. Select User Name.

Welcome

Figure 1-4 Login Interface

1. Input password.
2. Click Login.

• When you forget the password of the admin, you can click Forgot Password to reset the password.
• If you enter the wrong password 7 times, the current user account will be locked for 60 seconds.

Chapter 2 Live View

• 1. GUI Introduction
• Click Target Detection at the upper-left corner, and select or to display the specified live target detection results. For result details, click View More.

HU Note

° Target Detection is only available for certain models.

° Target Detection is valid when HDD is installed.

° 0 is valid for motion detection, line crossing detection, intrusion detection, and facial detection.

• Click to start/stop auto-switch. The screen will automatically switch to the next one.
• Click to enter full screen mode.
• Double click a camera to view it in single-screen mode. Double click again to exit single-screen mode.
• Change a camera live view screen by dragging it from its screen to the desired screen.
• Scroll up/down to turn to previous/next screen.
• Position the cursor on a camera to show shortcut menu.

Figure 2-1 Shortcut Menu

Table 2-1 Shortcut Menu Description

• In the live view interface, there are icons at the upper-right corner of the screen for each

camera, showing the camera recording and alarm status.

Table 2-2 Live View Icon Description

• Right click your mouse to display the shortcut menu.

Menu

Ei Single Screen >

S Window Division >

< Previous Screen

> Next Screen

O Si art All! D-swHch

EJ Camera

® Playback

a FTZ Control

Figure 2-2 Right Click Shortcut Menu

• 1. PTZ Control
     1. Configure PTZ Parameter

You shall configure PTZ parameters before controlling a PTZ camera.

Steps

1. Preview a camera in live view and click 0 on shortcut menu.

2. Click PTZ Parameter Settings.

Figure 2-3 PTZ Settings

Figure 2-4 PTZ Parameter

1. Set the PTZ camera parameters.

C0Note

• All parameters should be the same as the PTZ camera.
• For the Coaxitron camera/dome connected, you can select the PTZ protocol to UTC (Coaxitron). Ensure the selected protocol is supported by the connected camera/dome.
• The AHD and HDCVI cameras support coaxitron control.
• Selecting Coaxitron protocol will make other parameters unavailable, including baud rate, data bit, stop bit, parity and flow control.

1. Click OK.
   • 1. PTZ Control Panel Introduction

Table 2-3 PTZ Panel Description

• • 1. Customize Preset

Set a preset location where the PTZ camera would point to when an event occurs.

Steps

1. Preview a camera in live view and click on shortcut menu.
2. Select a desired preset in preset list.
3. Use direction buttons to wheel the camera to required locations. Adjust zoom and focus as your desire.
4. Click 1* .

What to do next

Double click a preset in the preset list to call it.

• • 1. Customize Patrol

Patrol refers to a path consists of a series of presets with designated sequence. It provides dynamic live image for monitoring several presets.

Steps

1. Preview a camera in live view and click on shortcut menu.
2. Click Patrol.
3. Select a desired patrol.
4. Click Set.
5. Click + .
6. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of patrol. The key point is corresponding to the preset. The preset number determines the order at which the PTZ will follow while cycling through the patrol. Duration refers to the time span to stay at the corresponding key point. Speed defines the speed at which the PTZ will move from one key point to the next.

Figure 2-5 Patrol Settings

1. Click Apply.

What to do next

Select a patrol and click Call to call it. The PTZ camera will move according the predefined patrol path.

Patroll ▼

Set Call

Figure 2-6 Call Preset

• • 1. Customize Pattern

A pattern records the movement path and dwell time in a certain position. When you call a pattern, the PTZ camera will move according to the recorded path.

Steps

1. Preview a camera in live view and click on shortcut menu.
2. Click Pattern.
3. Select a pattern.
4. Click Record.
5. Use direction buttons to wheel the camera to required locations. Adjust zoom and focus as your desire.
6. Click Stop Recording. The previous PTZ camera moving path is recorded as a pattern.

What to do next

Select a pattern and click Call to call it. The PTZ camera will move according the predefined

pattern.

Chapter 3 Playback

• 1. GUI Introduction

Go to Playback .

Figure 3-1 Playback

Table 3-1 Playback Interface Description

Figure 3-2 Timeline

• Position the cursor on the timeline, drag the timeline to position to a certain time.
• Period marked with blue bar contains video. Red bar indicates the video in the period is event video.
• Scroll up/down to zoom out/in timeline.
  1. Normal Playback

Play back normal videos.

Steps

1. Go to Playback .
2. Select a camera from the camera list.
3. Select a date on the calendar for playback.

C®Note

The blue triangle at the calendar date corner indicates there are available videos. For example, means video is available. 22 means no video.

1. Optional: Position the cursor on playback window to show control bar.

Figure 3-3 Control Bar

Table 3-2 Button Description

• 1. Smart Playback

The smart playback function provides an easy way to get through the less effective information. When you select the smart playback mode, the system will analyze the video containing the motion detection, line crossing detection, or intrusion detection information.

Before You Start

Configure motion detection, line crossing detection, and intrusion detection rules and detection areas.

Steps

1. Go to Playback .
2. Click Smart.
3. Select a camera.

Figure 3-4 Smart Playback Interface

4. Position the cursor on playback window to show control bar.

Figure 3-5 Control Bar

Table 3-3 Button Description

Normal Video

Set normal video playback speed. The option is only valid when Do not Play Normal Videos is unchecked.

Play Speed of Smart/Custom Video

Set playback speed of videos with smart information. The option is only valid when Do not

Play Normal Videos is enabled.

Play Strategy

Do not Play Normal Videos 0

Normal Video

—- _ ——— X 8

Play Speed of Smart/Custom Video

—————— X1

Cancel

Figure 3-6 Play Strategy

3.4 Back up Clip

You can clip videos during playback. Video clips can be exported to the backup device (USB flash drives, USB HDDs, USB writer, SATA writer, etc.).

Before You Start

Connect a backup device to your video recorder.

Steps

1. Start playback. Refer to Normal Playback for details.
2. Click .
3. Clip videos.

• Click Q, set start and end time, click OK.
• Set a time segment on time bar for clipping.

Figure 3-7 Time Segment

1. Click [7] .
2. Click Export to export the clip to backup device.
3. Search File

Steps

1. Go to Search .
2. Set search conditions.
3. Click Search.

• Click to play the video.
• Click to lock the file. Locked file will not be overwritten.
• Select file(s), and click Export to export file(s) to backup device.

System Date

System Time

Resolution

Enable Wizard

Enable Password

Enable NTP

Interval (min)

NTP Server

NTP Port

1. Configuration (Easy Mode)

Easy mode contains basic configurations. Go to Configuration , and click Easy Mode.

• 1. System Configuration
     1. General

You can configure the output resolution, system time, mouse pointer speed, etc.

Steps

1. Go to Configuration ^ System ^ General .

02-09-2019

19:35:38 ©

1024‘768i60HZ

□

0

□

60

time.windows com

123

Figure 5-1 General Settings

1. Configure the parameters as your desire.

Enable Wizard

The wizard will pop up after the device starts up.

Enable Password

You need to enter password for authentication if the device automatically logged out.

Enable NTP

Network time protocol (NTP) is a networking protocol for time synchronization. The device can connect to NTP (network time protocol) server to sync time.

Interval (min)

Time interval between two time synchronization with NTP server.

NTP Server

IP address of the NTP server.

NTP Port

Port of the NTP server.

1. Click Apply.
   • 1. User

Add User

There is a default account: Administrator. The administrator user name is admin. Administrator has the permission to add, delete, and edit user. Guest user only has live view, playback, and log search permission.

Steps

1. Go to Configuration ^ User .
2. Click Add and confirm your admin password.

Figure 5-2 Add User

1. Enter user name.
2. Enter the same password in Password and Confirm.

/ * \ Warning

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

1. Click OK.

– Click / to edit user.

Set Password Resetting Email

When you forgot your login pattern and password, the device will send an email contains verification code to your email for password resetting.

Steps

1. Go to Configuration ^ User .
2. Click Password Resetting Email.
3. Enter admin password for authorization.
4. Enter an email address.
5. Click OK.

Reset Password

You can reset your password when you forgot your login pattern and password.

Steps

1. Click Forgot Password at the password login interface.
2. Click Next if you agree the Privacy Policy, you can scan the QR code to read it.
3. Follow the wizard to reset password.

5.1.3 Exception

You can receive exception events hint in alarm center, and set exception linkage actions.

Steps

1. Go to Configuration ^ System ^ Exception .
2. Optional: Configure event hint. When the set events occur, you will receive hints in alarm center.
3. Check Event Hint.
4. Click at the upper-right corner of local menu to enter alarm center.
5. Select an event type.
6. Click Set to select events to hint.
7. Set Exception Type
8. Select Normal Linkage and Trigger Alarm Output type for exception linkage actions.

□ Audible Warning □ 10.96.15.145:8000->1

□ 10.96.15.1 45:8000->2

□ Notify Surveillance Center

□ Send Email

Figure 5-3 Exceptions

1. Click Apply.

5.2 Network Configuration

• • 1. General

You shall properly configure the network settings before operating the device over network.

Steps

1. Go to Configuration ^ Network ^ General .

DHCP

IPv4 Address

IPv4 Subnet Mask

IPv4 Default Gateway

Obtain DNS Automatically 0

Preferred DNS Server

Alternate DNS Server

Figure 5-4 Network

1. Set network parameters.

DHCP

If the DHCP server is available, you can check Enable DHCP to automatically obtain an IP address and other network settings from that server.

Obtain DNS Automatically

If DHCP is checked. You can check Obtain DNS Automatically to automatically obtain

Preferred DNS Server and Alternate DNS Server.

1. Click Apply.
   • 1. HiLookVision

HiLookVision provides mobile phone application and platform service to access and manage your connected devices, which enables you to get a convenient remote access to the video security system.

Steps

1. Go to Configuration ^ Network ^ Platform Access .
2. Select Access Type as HiLookVision.
3. Check Enable. The service terms will pop up.
4. Scan the QR code to read the service terms and privacy statement.
5. Check I have read and agree to Service Terms and Privacy Statement. if you agree the service terms and privacy statement..
6. Click OK.
7. Optional: Check Stream Encryption. It requires to enter verification code in remote access and live view after this function is enabled.
8. Optional: Check Custom, and edit Server Address.
9. Enter a code in Verification Code. You can click Refresh to randomly generate a verification code.
10. Bind your device with a HiLookVision account.
11. Use a smart phone to scan the QR code, and download HiLookVision app. You can also download it from https://appstore.hikvision.com, or the QR code below. Refer to HiLookVision Mobile Client User Manual for details.

Figure 5-5 Download HiLookVision

2) Use HiLookVision to scan the device QR, and bind the device.

Hl® Note

If the device is already bound with an account, you should unbind with the current account.

1. Click Apply.

What to do next

You can access your video recorder via HiLookVision.

• • 1. Email

Set an email account to receive event notification.

Before You Start

• Ensure your video recorder is in a local area network with an SMTP mail server.
• Configure your network parameters. Refer to General for details.

Steps

1. Go to Configuration ^ Network ^ Email .

Server Authentication

User Name

Password

SMTP Server

SMTP Port

SSUTLS

Attached Picture

Sender

Sender’s Address

Select Receivers

Receiver

Receiver’s Address

Figure 5-6 Email

1. Set email parameters

Server Authentication

(Optional), check it to enable the server authentication feature.

User Name

The user account of email sender for SMTP server authentication.

Password

The password of email sender for SMTP server authentication.

SSL/TLS

(Optional), check it to enable SSL/TLS if it required by the SMTP server.

Sender

The sender name.

Sender’s Address

The sender’s email address.

Select Receiver

Select a receiver. Up to 3 receivers are available.

Receiver

The receiver name.

Receiver’s Address

The receiver’s email address.

djNote

• For network cameras, the event images are directly sent as the email attachment. One network camera only sends one picture.
• For analog cameras, 3 attached pictures will be sent for one analog camera when an event occurs.

1. Click Apply.

5.3 Camera Management

• • 1. Network Camera

Add Network Camera by Device Password

Add network cameras which the password is the same as your video recorder.

Before You Start

• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct. Refer to General for details.
• Ensure the network camera password is the same as your video recorder.

Steps

1. Go to Configuration ^ Camera ^ IP Camera . The online cameras on the same network segment with your video recorder are displayed in the camera list.

+ Ql UI 0 9 Search!-

□ No. I IP Address I Edit I Add/Delete I Security I Status I Camera Name

… 10.6.114.36 ~ + ©Active A

Figure 5-7 IP Camera Management Interface

1. Click + to add the camera.

Add Network Camera Manually

Before You Start

• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct.
• Ensure the network camera is activated.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click + .
3. Set network camera parameters, including IP address, protocol, management port, etc. You can check Use IPC Active Password to use the device password to add network camera(s).
4. Optional: Click Add More to add another network camera.
5. Click OK.

Figure 5-8 Add Network Camera

Edit Connected Network Camera

You can edit the IP address, protocol and other parameters of the added network cameras.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click / to edit the selected camera.

Channel Port

If the connected device is an encoding device with multiple channels, you can select the channel port No. to choose a connecting channel.

1. Click OK.

Sort Channel Order

Channel layout windows are ordered by channel number. You can change the camera linked channel number by dragging windows.

Steps

1. Go to Configuration ^ Camera ^ Camera .
2. Click Sort Channel.
3. Drag a channel window to the channel number as your desire.
4. Click Apply.

C®Note

After sorting channels, the device will reconnect to network cameras.

Configure Remote Settings

For the camera parameters that were only configurable via web browser, remote settings function provides an operation interface to configure remote camera parameters.

Before You Start

Ensure your camera is properly connected.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click Remote Settings
3. After the device resource is initialized, select a camera.
4. Set camera parameters.

Upgrade Network Camera

The Network camera can be remotely upgraded through the device.

Before You Start

• Ensure you have inserted the USB flash drive to the device, and it contains the network camera upgrade firmware.
• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click O .
3. Click Yes to confirm.
4. Select the camera upgrade firmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automatically after upgrade completed.

Configure Advanced Camera Parameters

You can configure advanced camera parameters like camera IP address, camera password, etc.

Before You Start

• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click ® .
3. Set camera parameters like IP address, camera password, etc.
4. Click Apply.

5.3.2 OSD Settings

Configure OSD (On-Screen Display) settings for the camera, including date format, camera name, etc.

Steps

1. Go to Configuration ^ Camera ^ OSD .
2. Select a camera.

Figure 5-9 OSD

3. Drag the text frames on the preview window to adjust the OSD position.

4. Click Apply.

5.3.3 Event

Motion Detection

Motion detection enables the video recorder to detect the moving objects in the monitored area and trigger alarms.

Steps

1. Go to Configuration ^ Camera ^ Motion Detection .
2. Select a camera.
3. Check Enable.
4. Set the motion detection area.

• Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
• Click Full Screen to set the motion detection area as full screen. You can drag on the preview window to draw motion detection areas.

C® Note

The operation may differ according to different models.

1. Adjust Sensitivity. Sensitivity allows you to calibrate how readily movement triggers the alarm. A higher value results in the more readily to triggers motion detection.
2. Set analysis mode as AI or PIR.

AI

The motion detection event will be analyzed by your device.

PIR

The motion detection event will be analyzed by certain analog PIR cameras.

1. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human or vehicle.

US Note

This function is only available for certain models.

1. Set the arming schedule. Refer to Configure Arming Schedule for details.
2. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
3. Click Apply.

Configure Arming Schedule

Steps

1. Select Arming Schedule.
2. Choose one day of a week and set the time segment. Up to eight time periods can be set within each day.

djNote

Time periods shall not be repeated or overlapped.

Figure 5-10 Set Arming Schedule

1. Click Apply.

Configure Alarm Linkage Action

Alarm linkage actions will be activated when an alarm or exception occurs.

Steps

1. Click Linkage Action.

Figure 5-11 Linkage Actions

2. Set normal linkage actions, trigger alarm output, trigger recording channel, etc.

Full Screen Monitoring

The local monitor will display the alarming channel image in full screen when an alarm is triggered. It requires to select the alarming channel(s) in Trigger Channel.

Audible Warning

It will trigger an audible beep when an alarm is triggered.

Notify Surveillance Center

The device will send an exception or alarm signal to the remote client software when an alarm is triggered.

Send Email

It will send an email with alarm information when an alarm is triggered.

PTZ Linkage

It will trigger PTZ actions (e.g., call preset/patrol/pattern) when smart events occur.

3. Click Apply.

5.4 Device Management

• • 1. Switch

Add and manage switches.

Quick Add Switch

Quick add switch(es) in the same network segment with the video recorder. If the switch is not activated, it will be added with the channel default password.

Steps

1. Go to Configuration ^ Device Management ^ Switch.
2. In the Online Device List, check the switch(es) to be added and click Add to add switch(es) in the same network segment with the video recorder using the channel default password.

Add Switch Manually

Steps

1. Go to Configuration ^ Device Management ^ Switch .
2. In the Online Device List, click Add and set the parameters of the channel.

Table 5-1 Channel Parameter Description

3. Click Add and Continue and repeat operation until all device have been added.

4. Click Add.

5.4.2 Non-Video Event

Configure non-video event.

Steps

1. Go to Configuration ^ Device Management ^ Non-Video Event.
2. Select the device.
3. Select the Alarm Content.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
6. Click Apply_o

5.5 Recording Management

• • 1. Storage Device

Initialize HDD

A newly installed hard disk drive (HDD) must be initialized before it can be used to save videos and information.

Before You Start

Install at least an HDD to your video recorder. For detailed steps, refer to Quick Start Guide.

Steps

1. Go to Configuration ^ Record ^ Storage .
2. Select an HDD.
3. Click Init.

Repair Database

Repair an HDD that with error in database. Please operate it with the help of professional technical support.

Secure Erase

Secure erase will delete videos in the selected disk(s).

Add Network Disk

You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.

Steps

1. Go to Configuration ^ Record ^ Storage .
2. Click Add.
3. Select NetHDD.
4. Set Type as NAS or IPSAN.
5. Enter NetHDD IP address.
6. Click Search to search the available disks.

Figure 5-12 Add NetHDD

7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.

8. Click OK. The added NetHDD will be displayed in the storage device list.

5.5.2 Configure Recording Schedule

Video recorder will automatically start/stop recording according to the configured schedule.

Configure Continuous Recording

Steps

1. Go to Configuration ^ Record ^ Parameter .
2. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to Configure Recording Parameter for details.
3. Go to Configuration ^ Record ^ Schedule .
4. Select recording type as Continuous. Refer to Edit Schedule for details.

Configure Event Recording

You can configure the recording triggered by the motion detection, line crossing detection, and intrusion detection.

Steps

1. Go to Configuration ^ Event ^ Smart Event .
2. Configure the event detection and select the channels to trigger the recording when an event occurs.
3. Go to Configuration ^ Record ^ Parameter .
4. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to Configure Recording Parameter for details.
5. Go to Configuration ^ Record ^ Schedule .
6. Select recording type as Event. Refer to Edit Schedule for details.

Edit Schedule

Steps

1. Go to Configuration ^ Record ^ Schedule .

Figure 5-13 Recording Schedule

Continuous

Continuous recording.

Event

Recording triggered by all event triggered alarm.

1. Select a camera in CameraNo.
2. Check Enable.
3. Configure the recording schedule.

Edit a. Click Edit.

Schedule b. Select a day to configure in Weekday.

1. To set an all-day recording schedule, check All Day and select schedule type.
2. To set other schedules, uncheck All Day, and set Start/End Time and schedule type.

Note

Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.

1. Click OK to save the settings and go back to upper level menu.

Figure 5-14 Edit Schedule

1. Click to select schedule type as Continuous or Event.

Draw

Schedule

5. Click Apply.

1. On the table, drag the mouse on the desired period to draw a colored bar.

5.5.3 Configure Recording Parameter

Steps

1. Go to Configuration ^ Record ^ Parameter .
2. Configure recording parameters.

Main Stream

Main stream refers to the primary stream that affects data recorded to the hard disk drive and will directly determine your video quality and image size. Comparing with the sub­stream, the main stream provides a higher quality video with higher resolution and frame rate.

Sub-Stream

Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the outgoing internet bandwidth without sacrificing your direct recording quality. Sub-stream is often exclusively used by smartphone applications to view live video. Users with limited internet speeds may benefit most from this setting.

Frame Rate

Frame rate refers to how many frames are captured each second. A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.

Resolution

Image resolution is a measure of how much detail a digital image can hold: the greater the resolution, the greater the level of detail. Resolution can be specified as the number of pixel­columns (width) by the number of pixel-rows (height), e.g.,1024×768.

Bitrate

The bit rate (in Kbit/s or Mbit/s) is often referred to as speed, but actually defines the number of bits/time unit and not distance/time unit.

C® Note

Higher resolution, frame rate, and bitrate provide you better video quality, but it also requires more internet bandwidth and uses more storage space on the hard disk drive.

1. Click Apply.

Chapter 6 Configuration (Expert Mode)

Go to Configuration , and click Expert Mode at the lower-left corner.

• 1. System Configuration
     1. General

Configure Basic Settings

You can configure the language, system time, output resolution, mouse pointer speed, lock screen password, etc.

Go to Configuration ^ System ^ General ^ Basic Settings , configure the parameters as your desire, and click Apply.

Language

The default language is English.

VGA/HDMI Resolution

Select the output resolution, which must be the same with the resolution of the VGA/HDMI display.

Lock Screen Password

You need to enter password for authentication if the screen is locked.

Mouse Pointer Speed

Set the speed of mouse pointer. 4 levels are configurable.

Wizard

The wizard will pop up after the device starts up.

Enhanced Decoding Mode

Disabling enhanced decoding mode will reduce the local decoding capability by half and restart the device.

Configure DST Settings

DST (Daylight Saving Time) refers to the period of the year when clocks are moved one period ahead. In some areas worldwide, this has the effect of creating more sunlit hours in the evening during months when the weather is the warmest.

Go to Configuration ^ System ^ General ^ DST Settings , configure the parameters as your desire, and click Apply.

Configure More Settings

You can configure your device name, lock screen time, output mode, etc.

Go to Configuration ^ System ^ General ^ More Settings , configure the parameters as your desire, and click Apply.

Device Name

Edit the video recorder name.

Device No.

The number is required in the connection with remote control, network keyboard, etc. Edit the serial number of video recorder. The device number ranges from 1 to 255, and the default value is 255.

Lock Screen

Set timeout time for lock screen.

Menu Output Mode

Choose output to display local menu.

Figure 6-1 More Settings

• • 1. Live View

Configure General Parameters

You can configure the output interface, mute or turning on the audio, event output interface, etc.

Steps

1. Go to Configuration ^ System ^ Live View ^ General .

Enable Audio Output

Volume

Figure 6-2 Live View-General

1. Configure the Live View parameters.

Live View Mode

Select the live view window division.

Dwell Time

The time to dwell in a camera before switching to next camera when auto-switch in live view is enabled.

Event Output

Select the output to show event video.

Full Screen Monitoring Dwell Time

Set the time to show alarm event image.

Enable Audio Output

Turn on/off audio output for the selected video output.

Volume

Adjust the live view, playback, and two-way audio volume for the selected video output interface.

1. Click Apply.

Configure Live View Layout

Steps

1. Go to Configuration ^ System ^ Live View ^ View .
2. Select Video Output Interface to configure.
3. Click to select a window and click a camera No. in the camera list you would like to display. + means no camera is displayed on the window.
4. Optional: Click Q / f? to start/stop live view of all the cameras in order.
5. Click Apply.

Configure Channel-Zero Encoding

Enable the channel-zero encoding when you need to get a remote view of many channels in real time from a web browser or CMS (Client Management System) software, in order to decrease the bandwidth requirement without affecting the image quality.

Steps 1. Go 2. Set 3. Go

to Configuration ^ System ^ Live View ^ General . Video Output Interface as Channel-Zero.

to Configuration ^ System ^ Live View ^ Channel-Zero .

Enable Channel-Zero Encoding

Frame Rate

Max. Bitrate Mode

Max. Bitrate(Kbps)

Figure 6-3 Channel-Zero

1. Check Enable Channel-Zero Encoding.
2. Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and bitrate settings result in higher bandwidth requirement.
3. Click Apply.

6.1.3 User

Refer to User for details.

6.2 Network Configuration

• • 1. TCP/IP

TCP/IP must be properly configured before you operate video recorder over network.

Steps

1. Go to Configuration ^ Network ^ General ^ TCP/IP .
2. Configure network parameters.

Working Mode

Multi-address Mode

The parameters of the two NIC cards can be configured independently. You can select LAN1 or LAN2 in the NIC type field for parameter settings. You can select one NIC card as default route. And then the system is connecting with the extranet and the data will be forwarded through the default route.

Net-fault Tolerance Mode

The two NIC cards use the same IP address, and you can select the Main NIC to LAN1 or LAN2. By this way, in case of one NIC card failure, the video recorder will automatically enable the other standby NIC card so as to ensure the normal running of the whole system.

Load Balance Mode

By using the same IP address and two NIC cards share the load of the total bandwidth, which enables the system to provide two Gigabit network capacity.

C® Note

Working mode is only available for certain models.

NIC Type

Select NIC type as your desire. If your device supports Wi-Fi dongle function, the NIC of Wi-Fi dongle would be selectable after a suitable Wi-Fi dongle is installed.

DHCP

If the DHCP server is available, you can check Enable DHCP to automatically obtain an IP address and other network settings from that server.

MTU

The maximum transmission unit (MTU) is the size of the largest network layer protocol data unit that can be communicated in a single network transaction.

Default Route

Select a route as your desire. If your device supports Wi-Fi dongle function, the route of Wi-Fi dongle would be selectable after a suitable Wi-Fi dongle is installed.

Auto Obtain DNS

If DHCP is checked. You can check Obtain DNS Automatically to obtain Preferred DNS Server and Alternate DNS Server.

1. Click Apply.
   • 1. DDNS

Dynamic domain name server (DDNS) maps dynamic user IP addresses to a fixed domain name server.

Before You Start

Register DynDNS, PeanutHull and NO-IP services with your ISP.

Steps

1. Go to Configuration ^ Network ^ General ^ DDNS .

Enable 0

DDNS Type DynDNS ▼

Server Address

Device Domain Name

User Name

Password

Status DDNS is disabled

Figure 6-4 DDNS

1. Check Enable.
2. Select a DDNS type.
3. Enter parameters including service address, domain name, etc.
4. Click Apply.

What to do next

You can view DDNS status in Status.

• • 1. NAT

Two ways are provided for port mapping to realize the remote access via the cross-segment network, UPnP™ and manual mapping.

Before You Start

Enable the UPnP™ function of your router if UPnP™ is required. When the device network working mode is multi-address, the default device route should be on the same network segment as the LAN IP address of the router.

Steps

1. Configuration ^ Network ^ General ^ NAT .
2. Check Enable.
3. Select Mapping Type as Manual or Auto

Auto The port mapping items are read-only, and the external ports are set by the router automatically. You can click Refresh to get the latest status of the port mapping.

Manual Select an external port type. Click / to edit External Port. You can use the default external port No., or change it according to actual requirements. External Port indicates the port No. for port mapping in the router.

The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the other ports should be between 1 and 65535 and the value must be different from each other. If multiple devices are configured for the UPnP™ settings under the same router, the value of the port No. for each device should be unique.

1. Set the virtual server of your router, including internal source port, external source port, etc. The virtual server parameters shall be corresponding with your device port.
   • 1. Ports (More Settings)

Set different port types to enable relevant functions as your desire.

Go to Configuration ^ Network ^ General ^ More Settings .

Alarm Host IP/Port

The device will send the alarm event or exception message to the alarm host when an alarm is triggered. The remote alarm host must have the client management system (CMS) software installed.

Alarm Host IP refers to the IP address of the remote PC on which the CMS software (e.g., iVMS-4200) is installed, and the Alarm Host Port (7200 by default) must be the same as the alarm monitoring port configured in the software.

Server Port

For remote client software access. Ranges from 2000 to 65535. The default value is 8000.

HTTP Port

For remote web browser access. The default value is 80.

Multicast IP

Multicast can be configured to enable live view for cameras that exceed the maximum number allowed through network. A multicast IP address covers Class-D IP ranging from 224.0.0.0 to 239.255.255.255 and it is recommended to use the IP address ranging from 239.252.0.0 to 239.255.255.255.

When adding a device to the CMS software, the multicast address must be the same as that of the device.

RTSP Port

RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. The port is 554 by default.

Output Bandwidth Limit

You can check the checkbox to enable output bandwidth limit.

Output Bandwidth

After enable the output bandwidth limit, input the output bandwidth.

CUl Note

• The output bandwidth limit is used for the remote live view and playback.
• The default output bandwidth is the maximum limit.

Figure 6-5 Port Settings

6.2.5 Upload Logs to the Server

You can upload system logs to the server for backup.

Steps

1. Go to Configuration ^ Network ^ General ^ Log Server Settings .

Enable

Upload Time Interval (Fi) 1

Server IP Adtfress

Port 514

Apply

Figure 6-6 Log Server Settings

1. Turn on Enable
2. Set Upload Time Interval, Server IP Address, and Port.
3. Optional: Click Test to test if parameters are valid.
4. Click Apply.
   • 1. HiLookVision

Go to Configuration ^ Network ^ Platform Access . Refer to HiLookVision for details.

• • 1. Email

Go to Configuration ^ Network ^ Email . Refer to Email for details.

6.3 Camera Management

• • 1. Network Camera

Add Automatically Searched Online Network Camera

Add the network cameras to your video recorder.

Before You Start

• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct.
• Ensure the network camera password is the same as your video recorder.

Steps

1. Go to Configuration ^ Camera ^ Camera ^ IP Camera .
2. Click Online Device. The online cameras on the same network segment will be displayed in the list.

+ Qi ICT O 9 Searchl-

□ No. I IP Address I Edit I Add/Delete I Security I Status I Camera Name

… 10.6.114.36 ~ + ©Active A

Figure 6-7 Online Device

1. Select a network camera, and click Add to add it.

Add Network Camera Manually

Add the network cameras to your video recorder.

Before You Start

• Ensure your network camera should be in the same network segment with your video recorder.
• Ensure the network connection is valid and correct.
• Activate the network camera to add.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click + .

Figure 6-8 Add IP Camera

3. Enter information of the network camera to add.

Use Channel Default Password

If it is checked, the video recorder will add the camera by the set channel default password.

4. Click Add.

Add Network Camera on Different Network Segment

If your network camera is on a different network segment, the device can search its IP address within a range of IP addresses, and add it.

Before You Start

• Ensure the network connection is valid and correct.
• Ensure the network camera password is the same as your video recorder.

Steps

1. Go to Configuration ^ Camera ^ Camera ^ IP Channel .
2. Click Advanced Search.
3. Enter Network Segment.

first three octets the camera IP address.

O If your network camera is not on the same network segment with the NVR and s… ,

□ Network Segment 192 . 168 . 0 . 0

□ Network Segment 192. 168.1 . ~

| Cancel

Figure 6-9 Enter Network Segment

1. Click Add.

Add Network Camera Through Plug-and-Play

If an inactive network camera or third party ONVIF camera is connected to your network, the video recorder may automatically detect and add the camera, or notify you to manually add it.

Steps

1. Go to Configuration ^ Camera ^ Camera ^ IP Channel .
2. Click More.
3. Select Plug-and-Play.
4. Optional: Enable Auto Add Network Camera. The video recorder would automatically detect and add the inactive network camera or third party ONVIF camera.

Plug-and-Play x

Auto Add Network Camera «

OK

Figure 6-10 Auto Add Network Camera

‘Note

If you turn off Auto Add Network Camera, when an inactive network camera or third party ONVIF camera is connected to your network, the video recorder would automatically detect it and notify you to add it.

Edit Connected Network Camera

You can edit the IP address, protocol and other parameters of the added network cameras.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click / of an added network camera.

Channel Port

If the connected device is an encoding device with multiple channels, you can choose the channel to connect by selecting the channel port No. in the drop-down list.

1. Click OK.

Example

Enter an example that illustrates the current task (optional).

What to do next

Enter the tasks the user should do after finishing this task (optional).

Upgrade Network Camera

The Network camera can be remotely upgraded through the device.

Before You Start

• Ensure you have inserted the USB flash drive to the device, and it contains the network camera upgrade firmware.
• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct.

Steps

1. Go to Configuration ^ Camera ^ Camera .
2. Click .
3. Click Yes to confirm.
4. Select the camera upgrade firmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automatically after upgrade completed.

Add Network Camera Through PoE

The PoE interfaces enable the device to transfer electrical power and data to connected PoE cameras. And the PoE interface supports the Plug-and-Play function. Connectable PoE camera number varies with device models. If you disable a PoE interface, you can also use it to connect to an online network camera.

Add PoE Camera

Steps

1. Go to Configuration ^ Camera ^ Camera ^ PoE Settings .
2. Enable or disable long network cable mode by selecting Long Distance or Short Distance.

Long Distance

Long-distance (100 to 300 meters) network transmissions via PoE interface.

Short Distance

Short-distance (< 100 meters) network transmission via PoE interface.

C® Note

• The PoE ports are enabled with the short distance mode by default.
• The bandwidth of IP camera connected to the PoE via long network cable (100 to 300 meters) cannot exceed 6 Mbps.
• The allowed max. long network cable may be less than 300 meters depending on different IP camera models and cable materials.
• When the transmission distance reaches 100 to 250 meters, you must use the CAT5e or CAT6 network cable to connect with the PoE interface.
• When the transmission distance reaches 250 to 300 meters, you must use the CAT6 network cable to connect with the PoE interface.

Figure 6-11 Add PoE Camera

1. Click Apply.
2. Connect PoE cameras to your device PoE interfaces with network cables.

What to do next

The connected PoE camera will be displayed in Configuration ^ Camera ^ Camera ^ IP Channel .

You can click its status to view live image.

Add Non-PoE Network Camera

You can use the PoE channel resource to connect a non-PoE network camera.

Steps

1. Go to Configuration ^ Camera ^ Camera ^ IP Channel .
2. Click jo of a channel with no linked network camera.
3. Select Adding Method as Manual.

Plug-and-Play

The camera is physically connected to the PoE interface. You can click ® in the added device list to edit its parameters.

Manual

Add IP camera without physical connection via network cable.

1. Set other parameters, such as user name, password, and IP address.

Configure Advanced Camera Parameters

You can configure advanced camera parameters like camera IP address, camera password, etc.

Before You Start

• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct.

Steps

1. Go to Configuration ^ Camera ^ Camera .
2. Click ® .
3. Set camera parameters like IP address, camera password, etc.
4. Click Apply.

Configure Channel Type

You can disable a PoE channel to additionally increase a normal IP channel resource.

Go to Configuration ^ Camera ^ Camera ^ PoE Binding Configuration , and set the PoE channel as your desire.

Figure 6-12 PoE Binding Configuration

Sort Channel Order

Go to Configuration ^ Camera ^ Camera . Refer to Sort Channel Order for details.

Configure Remote Settings

Go to Configuration ^ Camera ^ Camera . Refer to Configure Remote Settings for details.

Import/Export IP Camera Configuration File

The information of added network camera can be generated into an excel file and exported to the local device for backup, including the IP address, manage port, password of admin, etc. And the exported file can be edited on your computer, like adding or deleting the content, and copy the setting to other devices by importing the excel file to it.

Before You Start

Connect a backup device like USB flash drive to your video recorder.

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click El
3. Click Export to export configuration files to the connected backup device.
4. To import a configuration file, select the file from the selected backup device and click Import. After the importing process is completed, you must reboot the video recorder.

Advanced Settings

Steps

1. Go to Configuration ^ Camera ^ IP Camera .
2. Click O .
3. Configure the parameters as your desire.

H.265 Auto Switch Configuration

If you enable the option, video recorder will automatically switch to H.265 stream for the network camera (which supports H.265 video format) for the initial access.

Upgrade

Upgrade the added network cameras.

Channel Default Password Management

Change the default password of activating and adding network camera.

• • 1. Display Settings

Configure the OSD (On-Screen Display), image settings, exposure settings, day/night switch settings, etc.

Steps

1. Go to Configuration ^ Camera ^ Display .
2. Select Camera.
3. Configure parameters as your desire.

OSD Settings

Configure the OSD (On-screen Display) settings for the camera, including date/time, camera name, etc.

Image Settings

Customize the image parameters including the brightness, contrast, and saturation for the live view and recording effect.

Exposure

Set the camera exposure time (1/10000 to 1 sec). A larger exposure value results in a brighter image.

Day/Night Switch

The camera can be set to day, night, or auto switch mode according to the surrounding illumination conditions.

Backlight

Set the camera’s wide dynamic range (0 to 100). When the surrounding illumination and the object have large differences in brightness, you should set the WDR value.

Image Enhancement

For optimized image contrast enhancement.

OSD Settings

Image Settings

Exposure

Day/Night Switch

Backlight

Image Enhancement

Camera Parameters Settings

Camera

Camera Name

Camera 01

Figure 6-13 OSD

4. Drag the text frames on the preview window to adjust the OSD position.

5. Click Apply.

• • 1. Privacy Mask

You are allowed to configure the privacy mask areas that cannot be viewed or recorded.

Steps

1. Go to Configuration ^ Camera ^ Privacy Mask .
2. Select Camera.
3. Check Enable.

Clear Area 1

□ Clear Area 2

□ Clear Area 3

□ Clear Area 4

Clear All

Camera

Enable

Figure 6-14 Privacy Mask

4. Drag to draw an area on the window. The frames of the areas will be marked with different colors.

OZlNote

Up to 4 privacy mask areas can be configured. The size of each area can be adjusted.

5. Click Apply.

6.4 Device Management

• • 1. Switch

Add and manage switches.

Quick Add Switch

Quick add switch(es) in the same network segment with the video recorder. If the switch is not activated, it will be added with the channel default password.

Steps

1. Go to Configuration ^ Device Management ^ Switch.
2. In the Online Device List, check the switch(es) to be added and click Add to add switch(es) in the same network segment with the video recorder using the channel default password.

Add Switch Manually

Steps

1. Go to Configuration ^ Device Management ^ Switch .
2. In the Online Device List, click Add and set the parameters of the channel.

Table 6-1 Channel Parameter Description

3. Click Add and Continue and repeat operation until all device have been added.

4. Click Add.

6.5 Event Configuration

• • 1. Normal Event

Motion Detection

Motion detection enables the video recorder to detect the moving objects in the monitored area and trigger alarms.

Steps

1. Go to Configuration ^ Camera ^ Motion Detection .
2. Select a camera.
3. Check Enable.
4. Set the motion detection area.

• Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
• Click Full Screen to set the motion detection area as full screen. You can drag on the preview window to draw motion detection areas.

1. Adjust Sensitivity. Sensitivity allows you to calibrate how readily movement triggers the alarm. A higher value results in the more readily to triggers motion detection.
2. Set analysis mode as AI or PIR.

AI

The motion detection event will be analyzed by your device.

PIR

The motion detection event will be analyzed by certain analog PIR cameras.

1. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human or vehicle.
2. Set the arming schedule. Refer to Configure Arming Schedule for details.
3. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
4. Click Apply.

Video Tampering

Trigger alarm when the lens is covered and take alarm response actions.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Video Tampering .

Figure 6-15 Video Tampering

1. Set Camera.
2. Turn on Enable.
3. Adjust Sensitivity as your desire. The higher the value is, the more easily the video tampering can be triggered.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
6. Click Apply.

Video Loss

Detect video loss of a camera and take alarm response actions.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Video Loss .
2. Set Camera.
3. Turn on Enable.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
6. Click Apply.

Alarm Input

Set linkage actions for an external sensor alarm.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Alarm Input .

Figure 6-16 Alarm Input

Note

Local alarm input: Local alarm input is triggered by the external device that connected to the video recorder’s terminal block.

1. Click jo of a desired alarm input.

Figure 6-17 Edit Alarm Input

1. Customize Alarm Name.
2. Set alarm type as N.O (normally open) or N.C (normally closed).
3. Set Settings as Input to enable the function.

C®Note

If you set Settings as Nonuse, the alarm input will be disabled. If you set Settings as One-Key Disarming, the selected linkage method(s) of the alarm input will be disabled.

1. Set the arming schedule. Refer to Configure Arming Schedule for details.
2. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
3. Click Apply.

Alarm Output

Trigger an alarm output when an alarm is triggered.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Alarm Output .

Figure 6-18 Alarm Output

1. Click <o of a desired alarm output.
2. Customize Alarm Name.
3. Select Dwell Time.

Figure 6-19 Edit Alarm Output

1. Set Settings as Input to enable the function.
2. Set the arming schedule. Refer to Configure Arming Schedule for details.
3. Click Apply.

Flashing Light Alarm Output

When light and audio alarm camera is connected, you can set the flashing time, flashing frequency, and arming schedule of the flashing light alarm.

Before You Start

Light and audio alarm camera is connected.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Flashing Light Alarm Output.
2. Click E for any row.
3. Set the Flashing Time and Flashing Frequency.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. ClickSave.

Audio Alarm Output

When light and audio alarm camera is connected, you can set the parameters and arming schedule of the audio alarm.

Before You Start

Light and audio alarm camera is connected.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Flashing Light Alarm Output.
2. Click S for any row.
3. Select the Audio Type as Alarm Sound, Prompt Sound, or Custom Audio.

CHjNote

• When you select the Alarm Sound, you also need to select the alarm sound type.
• When you select the Alarm Sound, you also need to upload the custom audio, enter the audio name and select the uploaded audio in the drop-down box of Custom Audio.

1. Set the Alarm Times and Sound Volume.
2. Set the arming schedule. Refer to Configure Arming Schedule for details.
3. ClickSave.

Exception

Exception events can be configured to take the event hint in the live view window and trigger alarm outputs and linkage actions.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Exception .
2. Configure event hint. When the set events occur, you will receive hints in alarm center.
3. Enable Event Hint.
4. Select events to hint. Choose from:

• Click @ of Event Hint Configuration to select events.
• Click in the upper-right corner of local menu to enter alarm center to select events.

1. Select Exception Type to set its linkage actions.

Event Hint

Set Event Hint 0

Figure 6-20 Exceptions

4. Set the arming schedule. Refer to Configure Arming Schedule for details.

5. Click Apply.

6.5.2 Perimeter Protection

Perimeter protection includes line crossing detection, intrusion detection, region entrance detection, and region exiting detection.

OU Note

Perimeter protection is only available for certain device models or camera models.

Line Crossing Detection

Line crossing detection detects people, vehicles, and objects crossing a set virtual line. The detection direction can be set as bidirectional, from left to right or from right to left.

Steps

1. Go to Configuration ^ Event ^ Perimeter Protection ^ Line Crossing .
2. Set Camera.
3. Select VCA Mode.

By NVR

The event will be analyzed by NVR. The device can analyze videos that contain human and vehicle. Only the target of selected type (human or vehicle) will trigger alarms, which can reduce false alarms that are caused by other objects.

By Camera

The event will be analyzed by camera.

1. Turn on Enable.
2. Set the detection rules and detection areas.
3. Set Arming Area.
4. Set Direction as A<->B, A->B, or A<-B.

A<->B

Only the arrow on the B side shows. An object crossing a configured line in both directions can be detected and trigger alarms.

A->B

Only an object crossing the configured line from the A side to the B side can be detected.

B->A

Only an object crossing the configured line from the B side to the A side can be detected.

1. Click Max. Size and draw a quadrilateral in the preview window to set the maximum draw area size.
2. Click Min. Size and draw a quadrilateral in the preview window to set the minimum draw area size.
3. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
4. Adjust Sensitivity. Sensitivity allows you to calibrate how readily movement triggers the alarm. A higher value results in the more readily to triggers motion detection.
5. Optional: Set Detection Target as Human or Vehicle to discard alarms which are not triggered by human or vehicle.

C® Note

This function is only available for certain models.

1. Set the arming schedule. Refer to Configure Arming Schedule for details.
2. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
3. Click Apply.

Intrusion Detection

Intrusion detection function detects people, vehicles, or objects that enter and loiter in a pre­defined virtual region.

Steps

1. Go to Configuration ^ Event ^ Perimeter Protection ^ Intrusion .
2. Select Camera to configure.
3. Turn on Enable.
4. Set the detection rules and detection areas.
5. Select Arming Area.
6. Adjust Time Threshold and Sensitivity.

Sensitivity

The size of the object that can trigger the alarm. The higher the value is, the more easily the detection alarm will be triggered. Its range is [1-100].

Time Threshold

Range [1s-10s], the threshold for the time of the object loitering in the region. When the duration of the object in the defined detection area is longer than the set time, the alarm will be triggered.

1. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human body or vehicle.

C® Note

This function is only available for certain models.

1. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
2. Set the arming schedule. Refer to Configure Arming Schedule for details.
3. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
4. Click Apply.

Region Entrance Detection

Region entrance detection function detects people, vehicle or other objects which enter a pre­defined virtual region from the outside place, and some certain actions can be taken when the alarm is triggered.

Steps

1. Go to Configuration ^ Event ^ Smart Event ^ Region Entrance .
2. Select Camera to configure.
3. Check Enable Region Entrance Detection.
4. Check Save VCA Picture to save the captured pictures of VCA detection.
5. Set the detection rules and detection areas.
6. Select Arming Area. Up to 4 arming areas are selectable.
7. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
8. Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the detection alarm can be triggered.
9. Set the arming schedule.
10. Set the linkage actions.
11. Click Apply.

Region Exiting Detection

Region exiting detection function detects people, vehicle or other objects which exit from a pre­defined virtual region, and some certain actions can be taken when the alarm is triggered.

Steps

1. Go to Configuration ^ Event ^ Smart Event ^ Region Exiting .
2. Select Camera to configure.
3. Check Enable Region Exiting Detection.
4. Check Save VCA Picture to save the captured pictures of VCA detection.
5. Set the detection rules and detection areas.
6. Select Arming Area. Up to 4 arming areas are selectable.
7. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
8. Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the detection alarm can be triggered.
9. Set the arming schedule.
10. Set the linkage actions.
11. Click Apply.
    • 1. Non-Video Event

Configure non-video event.

Steps

1. Go to Configuration ^ Device Management ^ Non-Video Event.
2. Select the device.
3. Select the Alarm Content.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
6. Click Apply_o
   • 1. Other Events

Thermal Camera Detection

The device supports the event detection modes of thermal network cameras: fire detection, temperature detection, etc. You can configure the arming schedule and linkage actions of the selected event.

Before You Start

Add a thermal network camera to your device and make sure the camera is activated.

Steps

1. Go to Configuration ^ Event ^ Other Events .
2. Select a thermal camera detection event.
3. Set Camera.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
6. Click Apply.
   • 1. Configure Arming Schedule

Steps

1. Click Arming Schedule.
2. Choose one day of a week and set the time segment. Up to eight time periods can be set within each day.

[Z@Note

Time periods shall not be repeated or overlapped.

Figure 6-21 Set Arming Schedule

1. Click Apply.
   • 1. Configure Alarm Linkage Action

Configure Full Screen Monitoring

When an alarm is triggered, the local monitor displays in full screen the video image from the alarming channel configured for full screen monitoring. And when the alarm is triggered simultaneously in several channels, you must configure the auto-switch dwell time.

Steps

1. Go to Configuration ^ System ^ Live View ^ General .
2. Set the event output and dwell time.

Event Output

Select the output to show event video.

Full Screen Monitoring Dwell Time

Set the time in seconds to show alarm event image. If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds (default dwell time).

1. Go to Linkage Action interface of the alarm detection.
2. Select Full Screen Monitoring alarm linkage action.
3. Select the channel(s) in Trigger Channel settings you want to make full screen monitoring.

OS Note

Auto-switch will terminate once the alarm stops and back to the live view interface.

Configure Audio Warning

The audio warning enables the video recorder to trigger an audible beep when an alarm is detected.

Steps

1. Go to Configuration ^ System ^ Live View ^ General .
2. Enable Audio Output and set Volume.
3. Go to Linkage Action interface of the alarm detection.
4. Select Audio Warning alarm linkage action.

Notify Surveillance Center

The video recorder can send an exception or alarm signal to the remote alarm host when an event occurs. The alarm host refers to the computer installed with client software (e.g., iVMS-4200, iVMS-5200).

Steps

1. Log into video recorder in web browser.
2. Go to Configuration ^ Network ^ Advanced Settings ^ Other .
3. Set Alarm Host IP and Alarm Host Port.
4. In local menu, go to Linkage Action interface of the alarm detection.
5. Select Notify Surveillance Center.

Configure Email Linkage

The video recorder can send an email with alarm information to a user or users when an alarm is detected.

Steps

1. Switch to easy mode.
2. Go to Configuration ^ System ^ Network ^ Email .
3. Configure the Email settings.
4. Go to Linkage Action interface of the alarm detection.
5. Select Send Email alarm linkage action.

Trigger Alarm Output

The alarm output can be triggered by the normal and smart events.

Steps

1. Go to Linkage Action interface of the alarm input or event detection.
2. Click Trigger Alarm Output.
3. Select the alarm outputs to trigger.
4. Go to Configuration ^ System ^ Event ^ Normal Event ^ Alarm Output .
5. Select an alarm output item from the list. Refer to Alarm Outputfor the alarm output settings.

Configure PTZ Linkage

Video recorder can trigger the PTZ actions (e.g., call preset/patrol/pattern) when the alarm event, or VCA detection events occur.

Steps

1. Go to Linkage Action interface of the alarm input or VCA detection.
2. Select PTZ Linkage.
3. Select the camera to perform the PTZ actions.
4. Select the preset/patrol/pattern No. to call when the alarm events occur.

PTZ Linkage

PTZ Linkage [D1] IPCamera 01 –

(• Preset No. 5 –

C Patrol No. 1

OPattern No. 1

Figure 6-22 PTZ Linkage

CU Note

You can set one PTZ type only for the linkage action each time.

6.6 Recording Management

• • 1. Configure Recording Schedule

Video recorder will automatically start/stop recording according to the configured schedule.

Configure Continuous Recording

Steps

1. Go to Configuration ^ Record ^ Parameter .
2. Set the continuous main stream/sub-stream recording parameters for the camera.
3. Go to Configuration ^ Record ^ Schedule .
4. Select recording type as Continuous.

Configure Event Recording

You can configure the recording triggered by the normal event or smart event.

Steps

1. Go to Configuration ^ Event .
2. Configure the event detection and select the cameras to trigger the recording when event occurs.
3. Go to Configuration ^ Record ^ Parameter .
4. Set the continuous main stream/sub-stream recording parameters for the camera.
5. Go to Configuration ^ Record ^ Schedule .
6. Select recording type as Event.

Edit Schedule

Steps

1. Go to Configuration ^ Record ^ Schedule .

Figure 6-23 Recording Schedule

• Continuous: Continuous recording.
• Event: Recording triggered by all event triggered alarm.

1. Select a camera in Camera No.
2. Check Enable.
3. Configure the recording schedule.
4. Click Edit.
5. Select a day to configure in Weekday.
6. To set an all-day recording schedule, check All Day and select schedule Type.
7. To set other schedules, uncheck All Day and set Start/End time and schedule Type.

CSNote

Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.

1. Click OK to save the settings and go back to upper level menu.

Edit

Figure 6-24 Edit Schedule

Ü@Note

You can also Click to select schedule type as ContinuousorEvent.and On the table, drag the mouse on the desired period to draw a colored bar.

1. Click Apply.
   • 1. Configure Recording Parameter

Main stream refers to the primary stream that affects data recorded to the hard disk drive and will directly determine your video quality and image size. Comparing with the sub-stream, the main stream provides a higher quality video with higher resolution and frame rate.

Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the outgoing internet bandwidth without sacrificing your direct recording quality. Sub-stream is often exclusively used by smartphone applications to view live video. Users with limited internet speeds may benefit most from this setting.

Steps

1. Go to Configuration ^ Record ^ Parameter to configure camera main stream and sub-stream parameters.
2. Configure recording parameters.

Frame Rate

Frame rate refers to how many frames are captured each second. A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.

Resolution

Image resolution is a measure of how much detail a digital image can hold: the greater the resolution, the greater the level of detail. Resolution can be specified as the number of pixel­columns (width) by the number of pixel-rows (height), e.g.,1024×768.

Bitrate

The bit rate (in kbit/s or Mbit/s) is often referred to as speed, but actually defines the number of bits/time unit and not distance/time unit.

Enable H.264+

The H.264+ mode helps to ensure the high video quality with a lowered bitrate. It can effectively reduce the need of bandwidth and HDD storage space.

Audio Source

The audio input signal source. If you select Audio Source as Camera Audio, it will transmit audio via coaxial cable, and make the local audio input signal unavailable. Ensure the camera supports to transmit audio via coaxial cable before selecting Audio Source as Camera Audio.

C®Note

Audio Source is only available for certain models.

1. Click Apply.
   • 1. Storage Device

Initialize HDD

If it is the first time you use your HDD, please initialize it after it is installed.

Before You Start

Install at least an HDD to your video recorder.

Steps

1. Go to Configuration ^ Record ^ Storage .
2. Select an HDD.
3. Click Init.

Repair Database

Repair an HDD that with error in database. Please operate it with the help of professional technical support.

Secure Erase

Secure erase will delete videos in the selected disk(s).

Add Network Disk

You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.

Steps

1. Go to Configuration ^ Record ^ Storage .
2. Click Add.
3. Select NetHDD.
4. Set Type as NAS or IPSAN.
5. Enter NetHDD IP address.
6. Click Search to search the available disks.
7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8. Click OK.

Result

The added NetHDD will be displayed in the storage device list.

• • 1. Configure Storage Mode

Configure HDD Quota

Each camera can be configured with an allocated quota for storing videos.

Steps

1. Go to Configuration ^ Record ^ Storage Mode .
2. Select Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in the text fields of Max. Record Capacity (GB) and Max. Picture Capacity (GB).

Mode ® Quota O Group

A Free Quota Space 931 GB

Figure 6-25 Quota

dJNote

When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and pictures.

1. Click Apply.
2. Reboot the video recorder to activate the new settings.
   • 1. Advanced Settings

Steps

1. Go to Configuration ^ Record ^ Advanced Settings .
2. Configure the parameters as your desire.

Overwrite

• Disable: When the HDD is full, video recorder will stop writing.
• Enable: When hard drive is full, video record will continue to write new files by deleting the oldest files.

Enable HDD Sleeping

HDDs which are free of working for a long time will turn into sleep status.

1. Maintenance
   1. Restore Default

Steps

1. Click 0 at the upper-right corner.
2. Select the restoring type.

Simple Restore

Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.

Factory Defaults

Restore all parameters to the factory default settings.

Restore to Inactive

Restore the device to the inactive status, and leave all settings unchanged except restoring user accounts.

1. Click Yes. The device will reboot automatically.
   1. Search Log

The operation, alarm, exception and information of video recorder can be stored in logs, which can be viewed and exported at any time.

Steps

1. Go to Maintenance ^ More .
2. Set the search conditions.
3. Click Search.
   1. Advanced Settings

Steps

1. Go to Configuration ^ Network ^ Advanced Settings .
2. Configure the parameters as your desire.

RTSP

You can specifically secure the stream data of live view by setting the RTSP authentication.

RTSP Authentication Type

Two authentication types are selectable, if you select digest, only the request with digest authentication can access the video stream by the RTSP protocol via the IP address. For security reasons, it is recommended to select digest as the authentication type.

ISAPA

ISAPI (Internet Server Application Programming Interface) is an open protocol based on HTTP, which can realize the communication between the system devices (e.g., network camera, NVR, etc.). The video recorder is as a server, the system can find and connect the video recorder.

HTTP

The admin user account can disable the HTTP service from the GUI or the web browser. After the HTTP is disabled, all the related services, including the ISAPI, Onvif and Gennetc, will terminate as well.

HTTP Authentication

If you need to enable the HTTP service, you can set the HTTP authentication to enhance the access security. Two authentication types are selectable, for security reasons, it is recommended to select digest as the authentication type.

IP Camera Occupation Detection

The function detects the network camera status. If the network camera has been added by another video recorder, the network camera status will show as □ in Online Device list.

1. Click Apply.
   1. Buzzer Switch

You can enable or disable buzzer with alarm linkage or exceptional linkage.

Steps

1. Click ® at the upper-right corner.
2. Click More.
3. Go to Buzzer Switch.
4. Turn on or turn off Enable.
   1. Device Maintenance
      1. Schedule Reboot

The device will automatically restart according to the schedule.

Steps

1. Click El at the upper-right corner.
2. Click More.
3. Go to Device Maintenance ^ Schedule Reboot .
4. Turn on Enable.
5. Set the reboot schedule.
6. Click Apply.
   • 1. Camera Upgrade

Upgrade the camera(s) in the added device list.

Steps

1. ClickMaintenance ( ) ^ More ^ Deice Maintenance ^ Camera Upgrade.
2. Click Check for Updates.
3. Upgrade camera.

• Select the channel to upgrade, and click the Upgrade on the right.
• Click Quick Upgrade to upgrade all channels that have updates.
  • 1. Device Status

You can mute the selected channel(s).

Steps

1. Click El at the upper-right corner.
2. Click More.
3. Go to Device Maintenance ^ Device Status .
4. In the Mute and Not Disturb column, check the corresponding channel(s).

Result

The selected channel(s) will be muted.

• 1. Upgrade

/»\ Warning

Do not shutdown or turn off the power during upgrade.

• • 1. Local Upgrade

Before You Start

Store the upgrade firmware to a backup device, and connect it to your device.

Steps

1. Go to Maintenance .
2. Click O near Firmware.
3. Select a backup device in Device Name.
4. Select the upgrade firmware.
5. Click Upgrade. Your device will reboot automatically.
   • 1. Online Upgrade

Upgrade the device with the latest online firmware.

Before You Start

Enable HiLookVision and configure its parameters. Refer to HiLookVision for details.

Steps

1. Go to Maintenance .
2. Click O .
3. Go to Online Upgrade .
4. Download the latest firmware.

Auto Download The will automatically check and download the latest firmware.

Test Upgrade Click Test Upgrade to manually check and download the latest firmware. 5. Upgrade your device if a new firmware version is available. The device will reboot automatically.

1. Alarm

When events occur, you can view their details in alarm center.

• 1. Set Event Hint

Select the events to hint in alarm center.

Steps

1. Click in the upper-right corner of local menu to enter alarm center.
2. Select Exception, Basic Event, or Smart Event to configure as your desire.

Figure 8-1 Alarm Centre

1. Click ft and select events to hint.
2. Click OK.

When the selected events occur, the alarm information will be displayed (locating in upper­right corner of local menu).

• 1. View Alarm in Alarm Center

Steps

1. Click in upper-right corner of local menu.
2. Select Exception, Basic Event, or Smart Event to view as your desire.
3. Web Operation
   1. Introduction

You can get access to the video recorder via web browser.

You may use one of the following listed web browsers: Internet Explorer 11.0, Apple Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024×768 and above.

For certain models, you will have to download a web component plug-in, and install it. Otherwise, a few functions would be unavailable. The download address is http://

hikdownload.ys7.com/web/webplugin/windows/WebComponents/standard/ WebComponents.exe .

• 1. Login

You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection. If the product does not work properly, please contact with your dealer or the nearest service center.

Steps

1. Open web browser, input the IP address of the video recorder and then press Enter.

C@Note

If you have changed HTTP port, enter http://IP address:HTTP port in address bar. E.g., http: 192.168.1.64:81.

1. Enter user name and password in the login interface.
2. Click Login.

Figure 9-1 Login

4. Follow the installation prompts to install the plug-in.

C@Note

You may have to close the web browser to finish the installation of the plug-in.

• 1. Live View

After login, live view interface shows.

Figure 9-2 Live View

• 1. Playback

Click Playback to enter playback interface.

Figure 9-3 Playback

• 1. Configuration

Click Configuration to enter configuration interface.

Figure 9-4 Configuration

• 1. Log

Steps

1. Go to Maintenance ^ System ^ Maintenance ^ Log .
2. Set the search conditions.
3. Click Search.

Figure 9-5 Log

1. Appendix
   1. Glossary

Dual-Stream

Dual-stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 1080P and the sub-stream having a maximum resolution of CIF.

DVR

Acronym for Digital Video Recorder. A DVR is device that is able to accept video signals from analog cameras, compress the signal and store it on its hard drives.

HDD

Acronym for Hard Disk Drive. A storage medium which stores digitally encoded data on platters with magnetic surfaces.

DHCP

Dynamic Host Configuration Protocol (DHCP) is a network application protocol used by devices (DHCP clients) to obtain configuration information for operation in an Internet Protocol network.

HTTP

Acronym for Hypertext Transfer Protocol. A protocol to transfer hypertext request and information between servers and browsers over a network.

PPPoE

PPPoE, Point-to-Point Protocol over Ethernet, is a network protocol for encapsulating Point-to- Point Protocol (PPP) frames inside Ethernet frames. It is used mainly with ADSL services where individual users connect to the ADSL transceiver (modem) over Ethernet and in plain Metro Ethernet networks.

DDNS

Dynamic DNS is a method, protocol, or network service that provides the capability for a networked device, such as a router or computer system using the Internet Protocol Suite, to notify a domain name server to change, in real time (ad-hoc) the active DNS configuration of its configured hostnames, addresses or other information stored in DNS.

Hybrid DVR

A hybrid DVR is a combination of a DVR and NVR.

NTP

Acronym for Network Time Protocol. A protocol designed to synchronize the clocks of computers over a network.

NTSC

Acronym for National Television System Committee. NTSC is an analog television standard used in such countries as the United States and Japan. Each frame of an NTSC signal contains 525 scan lines at 60Hz.

NVR

Acronym for Network Video Recorder. An NVR can be a PC-based or embedded system used for centralized management and storage for IP cameras, IP Domes and other DVRs.

PAL

Acronym for Phase Alternating Line. PAL is also another video standard used in broadcast televisions systems in large parts of the world. PAL signal contains 625 scan lines at 50Hz.

PTZ

Acronym for Pan, Tilt, Zoom. PTZ cameras are motor driven systems that allow the camera to pan left and right, tilt up and down and zoom in and out.

USB

Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices to a host computer.

Device Complete Guide

<p>The post Hilook 4K NVR Device Complete Guide first appeared on NVR IPCAMERA SECURITY.</p>

What is Hikvision AcuSense?

By minimizing false alarms triggered by animals, falling leaves, heavy rain, and other moving objects, AcuSense enables businesses and homeowners to focus security resources on real threats.Easy and affordable Artificial Intelligence has come to the mass market and a diverse set of users. Read on to learn more.

Hikvision AcuSense

Read More :

• How do I stop my Hikvision NVR from beeping?
• Hikvision Hik-Connect complete setup guide
• New Hikvision Hilook Firmwares 2022

INTRODUCTION

Demand Analysis

In traditional CCTV systems, all the moving objects in the picture will trigger the perimeter alarm, which may generate a lot of false alarms. Users have to waste a lot of time dealing with false alarms, and the alarm is unreliable. In addition, when the target needs to be found in the video, it needs to be manually searched by video playback, which is time consuming and laborious, and it is easy to lose key targets, which is very inconvenient.

After solving the basic monitoring and video problems, users need to receive more accurate alarms and to have a more convenient target search function to better use the monitoring system.

Solution

Some false alarms can be filtered by using a thermal camera, vibration optical fiber, radar, and other equipment. The cost of the whole system is too high, and it cannot meet the requirement of finding the target quickly afterwards.

With the development of artificial intelligence, target classification can be realized directly based on the video screen, and false alarm reductions and target retrieval can be provided, which can provide users with very cost-effective schemes.

System Architecture

Hikvision’s AcuSense Series of cameras and NVRs can prevent false alarms by identifying humans and vehicles when defining line crossing detection and triggering an alarm when only the selected object type (human and/or vehicle) is detected.

To set up False Alarm reductions and target classification without additional products, an AcuSense NVR and/or AcuSense cameras are required.

Figure 1, System Architecture Diagram

Function Description

Target Classification

By upgrading the hardware of conventional products, Hikvision has loaded artificial intelligence technology into the chip of the equipment. The equipment can classify and identify the objects appearing in the picture such as humans, vehicles, rainwater, light, leaves, animals, etc. Object classification is the basis for realizing false alarm and key target alarms.

Figure 2, Target Classification

False Alarm Reductions and Quick Target Search

Through target classification, alarms caused by animals, light, rain, leaves, or other objects can be filtered out, and only alarms triggered by human bodies and vehicles will be received. This is the function of a false alarm reduction.

In addition, in the face of a large number of monitoring video data, when searching key information such as people or cars, the target retrieval function is used. The device will record human body and vehicle information automatically, and solve the issue that video playback is time-consuming and easy to miss.

False Alarm Dy imhi

False Alarm by Rain

False Alarm by Animal

Figure 3, False Alarms

• False Alarm Reductions

* Quick Target Search

Human & vehicle targets detected efficiently.

The interference caused by other objeclsfanimal, leaf, light, rain, etc. f can be eliminated efficiently.

Human Target Search & Vehicle Target Search (supported by Hikvision AcuSense NVBs)

AcuSense Camera &

Main Functions

Figure 4, False Alarm Reductions and Quick Target Search

Configuring False Alarm Reductions

VISION

Live View

Playback

Picture

Configuration

Figure 5, Configuration > Event > Smart Event > Area Settings

1. Go to Configuration > Event > Smart Event > Line Crossing Detection in the local interface.
2. Use the pull-down list to select the camera to configure.
3. Check the Enable Local Smart Analysis checkbox to have the local NVR perform the smart analysis with a non-AcuSense camera. The NVR will acquire only the camera stream for intelligent event analysis, and the NVR will not acquire the camera’s smart event configuration. Up to four 8 MP non- AcuSense cameras are supported for false alarm reductions, and sub-stream resolution of these cameras have to be under WD1 (960*576). If this box is unchecked, the AcuSense camera (required in this case) will do the analysis. The NVR will acquire smart event configuration and alarm information from the camera.

NOTE: The NVR and camera configuration screens will slightly differ. This document uses the NVR configuration screens as examples.

1. Check the Enable Line Crossing Detection checkbox to activate line crossing detection.
2. Check one or both Detection Target checkboxes to set the type of object to trigger the alarm:

• Human: Alarm will be sent only if triggered by human(s).
• Vehicle: Alarm will be sent only if triggered by vehicle(s).
• No Box Checked: Alarm will be sent by any object(s).

1. Click the Area Settings tab.
2. Use the pull-down menu to set the line number to define (1-4). Up to four line crossing lines can be defined. The target classification can be set separately for each line.
3. Drag a line in the live view area with the left mouse button; release to end the line. Select line with left mouse button to move or resize the line.
4. Configure the line by clicking on one of the buttons:

• Max. Size*: Drag with the left mouse button to define a rectangle representing the maximum object size that will be detected crossing the defined line.
• Min. Size*: Drag with the left mouse button to define a rectangle representing the minimum object size that will be detected crossing the defined line.
• Draw Area: Drag with the left mouse button to define the total area to monitor.
• Clear: Click Clear, then click Save, to delete all line settings.

1. Use the pull-down menu to select the line crossing direction that will trigger the alarm:

• A<->B: Alarm will be triggered if object moves across the defined line from A side to B side or from B side to A side.
• A->B: Alarm will be triggered if object moves across the defined line from A side to B side.

Available only when configuring through the local NVR; setting will not appear if configuring through the camera.

• B->A: Alarm will be triggered if object moves across the defined line from B side to A side.

1. Set line crossing Sensitivity (0-100). The sensitivity value = 100 – S1/ST x 100, where S1 is the area of the target that has crossed the line and ST is the actual area of the target. The higher the sensitivity, the easier it is to trigger the alarm.
2. Click Save to save the line crossing settings.
3. Repeat for additional lines, up to four total.
4. Click Save.

Configuring Arming Schedule

Figure 6, Arming Schedule

1. Click the Arming Schedule tab to display the Arming Schedule section.
2. Drag the left mouse button to draw/modify blue timelines to define the times and days that the defined alarm will be active. The line may be resized and/or re-positioned using the mouse.

NOTE: Click X Delete to delete a highlighted blue timeline.

Click the HU Delete All to delete all of the defined blue timelines.

1. Click Save to save the schedule settings.

Configuring Linkage Method

Figure 7, Linkage Method

1. Click the Linkage Method tab to display the Linkage section.
2. Check the alarm action checkboxes you wish to configure:

• Normal Linkage

• Send Email – An alarm will cause the system to send an e-mail notification to the pre­defined e-mail address.
• Notify Surveillance Center – An alarm will cause notification to be sent to the pre-defined Surveillance Center.
• Upload to FTP/Memory Card – An alarm will cause the system to upload a notification to a pre-defined FTP site or memory card.
• White Light Flashing (Strobe Light and Audio Alarm/SL models only) – An alarm will cause the camera’s white light to flash (strobe).
• Audible Warning (Strobe Light and Audio Alarm/SL models only) – An alarm will cause the system to generate an audible alarm.

• Trigger Recording^[1]

• A1 – An alarm will cause this camera to start recording.

1. Click Save to save the alarm action settings.

Configuring White Light Output (Strobe Light and Audio Alarm/SL Model Only)

1. Go to Configuration > Event > Basic Event > White Light Alarm Output.
2. Set Flashing Duration from 1 to 60 seconds.
3. Set Flashing Frequency to High (interval 0.6 seconds), Medium (interval 1 second), or Low (interval 1.5 seconds).
4. Click Save to save the settings.

Figure 8, White Light Alarm Output

Configuring Audible Alarm Output (Strobe Light and Audio Alarm/SL Model Only)

Figure 9, Audible Alarm Output

1. Go to Configuration > Event > Basic Event > Audible Alarm Output.
2. Set Alarm Sound Type – Click the drop-down list to select one of 10 types of built-in alarm sounds.

NOTE: Importing local audio files is not supported.

Details of 10 Types Built-in Alarm Sounds

Figure 10, Alarm Sound Type Pull-Down List

1. Set Alarm Times – Enter how many times the alarm sound will repeat, from 1 to 50 times
2. Set Sound Volume – Volume can be set from 1 (softest) to 100 (loudest).

Checking Alarms

Use the Web interface to check the defined alarms.

Figure 11, Line Crossing Detection (Target: Vehicle)

1. Perform the following steps to show the defined lines and draw area overlaid on the image.

A Go to Configuration > Local > Rules.

2 Check the Enable checkbox.

Figure 12, Enable Target Rule Box

1. Check the alarm on the network camera’s Web preview interface. When someone crosses the line, the perimeter box and line crossing lines turn red.

Figure 13, Human Triggers Line Crossing Detection Alarm

Figure 14, iVMS-4200 Filter Human Alarm

NOTE: The rule box displayed in the network camera Web preview interface does not make target classification judgments; the alarm information is subject to the search result received from the alarm receiver and NVR. A comparison of the Web interface with the alarm receiver (such as iVMS-4200 client) can be used to distinguish if false alarm reductions has been performed.

Quick Target Searching

NVR Search Capabilities

File Management Search

1. On an AcuSense I-Series NVR, go to File Management.
2. Highlight Human Files or Vehicle Files.
3. Time: Set the time frame you wish to search.
4. Camera: Set the camera you wish to search.

5. File Type: Set file type you wish to search, Videos or Pictures.

For DS-9664N/-/8 local interface, file type must be specified with search conditions.

NOTE: AcuSense NVRs can switch between picture and video on the search results page without having to perform the search again.

6. Set the search choices:

• Select the target image in the red box area on the upper left corner, and listed picture will be a close-up view of the target.
• Select the source image in the red box area on the upper left corner, and listed picture will be the original picture.
• Select video in the red box on the upper right corner, and listed files will all be video files.
• Select picture in the red box on the upper right corner, and listed files will all be picture files.
• Select All, and the images and videos will be displayed together.

İDS-7732NXI-I4/16P/4S Local Interface

File type can be actively switched using the options located at the top right. Both picture and video results can also be listed together by using the All option.

Smart Search

AcuSense NVRs support smart search for Human Body Detection and Vehicle Search. Picture and video is combined on the search results preview screen.

IDS-7732NXI-I4/16P/4S Local Interface

NOTE: I-Series NVRs do not support smart search for human and/or vehicle target filtering.

DS-9664NI-I8 L ocal Interface

False Alarms Search

AcuSense NVRs can display all false alarms by using the All Files search (set event type to “False Alarm”). False alarms are generated by objects that approach being mistaken for a human or vehicle.

Figure 15, False Alarms

iVMS-4200 Client

Figure 16, Add Network Camera

Adding a Network Camera

1. Add the camera in the iVMS-4200 Device Management section.

Figure 17, iVMS-4200 View Alarm Information (Human)

1. View the triggered alarm on the iVMS-4200 Alarm Event interface. Alarm detail information will be labeled Human or Vehicle, as shown in the figure below.

Figure 18, iVMS-4200 View Alarm Information (Vehicle)

NOTE: The Target Type shown on the iVMS-4200 is the same as the Detection Type set in the configuration interface. Alarm information triggered by the unchecked category will be filtered and will not be displayed on the iVMS-4200.

1) Set Detection Type to Human, then the iVMS-4200 will display only Human target type alarm information.

2 Set Detection Type to Vehicle, then the iVMS-4200 will display only Vehicle target type alarm information.

Viewing Alarm on GUI Interface

The NVR’s local GUI interface cannot classify Humans and Vehicles in this version.

The current mechanism: after checking Smart Detection, the GUI interface will display all alarm pictures without classification between humans and vehicles (this feature will be optimized by the end of the year).

Figure 19, NVR local GUI interface

Viewing Alarms on iVMS-4200

1. Add the NVR on the iVMS-4200 Device Management interface.

Figure 20, Add NVR on iVMS-4200

Figure 21, View Alarm Information on iVMS-4200 (Human)

2. View the triggered alarm on the iVMS-4200 Alarm Event interface. Alarm detail information will label the target category as Human or Vehicle, as shown in the figure below.

Figure 22, View Alarm Information on iVMS-4200 (Vehicle)

The NVR alarm upload via iVMS-4200 is the same as for a network camera. The Target Type shown on the iVMS-4200 is consistent with the Detection Type set on the configuration interface. Unchecked categories will be filtered out and will not be displayed on the iVMS-4200.

Known Issue

When adding network cameras to the NVR, the NVR will issue a 24-hour arming schedule to the camera by default. After the camera is connected, configuring an arming schedule on the NVR will affect only whether the alarm is reported and displayed on this NVR, but the camera setting time will not change. If other terminals access the camera, the alarm will still be received.

Product List

Installation Requirements

• The proposal altitude of installation distance is 3 to 5 meters, equipment bow angle is approximately 10°, specific adjustments are according to the environment.
• The maximum monitoring distance depends on the lens’ focal length. The table of the maximum monitoring distance for the specific focal length is as follows:

• The monitoring area cannot be covered by nearby objects. Do not shoot backlight at the installation position, which will affect the image effect. The following shows a perimeter environment installation:

Figure 23, Installation of the Perimeter Environment

• The equipment installation needs to pay attention to certain blind areas. The calculation method of blind area distance is as follows:

Height

Horizontal Line

Depression Angle

H

D —» * Monitor Distances

• D = H • tan(90° – a/2 – p)
• D: Camera monitoring blind area H: Mounting height
• a: Vertical field Angle p Angle of depression

• Recommended Scenario:

• Try to avoid getting too close. It is recommended that the target be more than three meters away from the camera. For example, avoid scenes with lots of trees nearby.
• If there is a mirror in the environment, the mirror image or shadow can easily lead to false alarm

triggering.

• Adjust the camera angle during installation to avoid interference from high brightness lights or headlights.
• Domes are not recommended for outdoor scenes, IR reflect can seriously affect the accuracy of the alarm, as shown below:

– Heavy traffic scenes such as station, airport, theater, etc., will generate a lot of perimeter alarms, so it is suggested to avoid these types of scenes.

– Avoid situations where personnel targets are too large. AcuSense NVRs can analyze target sizes between 1/16 and 1/2 of the image’s vertical size. For example, if the camera’s resolution is 1080p, the vertical size of the target should be between 64 and 540 pixels.

In the following scene, the target takes up almost the whole picture. Adjusting the camera angle so that a targets is detected from a far distance so that it appears a suitable size is suggested.

Using Region Entrance/Exiting Detection instead of Intrusion/Line Crossing Detection is recommended for region intrusion of fixed scenarios.

1. Available alarm outputs will vary by NVR and camera. ↑

<p>The post Hikvision AcuSense NVR User Manual first appeared on NVR IPCAMERA SECURITY.</p>

Cloud Updating Your UNV NVR from the EZView Mobile App

Overview

Periodically updating your NVR and camera’s firmware is a great way to ensure your CCTV system is running smoothly and efficiently. This tutorial will guide you through the steps to cloud update your UNV NVR from the EZView mobile application.

Prerequisites

This tutorial assumes you have already initialized your NVR and added it to your EZView application. If you have not done so, please CLICK HERE for our tutorial section to learn how to do so.

Step 1

Open the EZView app on your phone. At the Live View screen, click on the three horizontal lines on the top left-hand side of your screen. This will open your main menu.

You will need to access your device list. To do so, click the word “Devices” in your main menu.

Device menu open, you will see a list with all your devices. When you have found the device you wish to upgrade, tap the three horizontal dots on the right-hand side of the NVR’s name. This will open the Device Menu for your NVR.

PLEASE NOTE: Typically, when there is a cloud update available for your NVR or cameras, you will see a small red dot next to the name of the NVR. In this case, no units needed a firmware update, so that red dot does not appear on the pictures. If you see a small red dot by your NVR, that means it is ready for an upgrade.

Step 2

After opening the device menu, click on the words “P2P Upgrade” to proceed to the Cloud Upgrade screen.

In the Cloud Upgrade screen, you will see which devices need a firmware update. It may be cameras, your NVR or both. In the figure below, the unit says it has the latest firmware. However your screen will show a red dot with an upgrade available. To start this upgrade, select your cameras and click “Start Upgrade (#)” at the bottom of the screen.

PLEASE NOTE: Your phone may ask you for confirmation to upgrade and restart your devices. You will click “Yes/Accept/Continue”, whichever you have on your screen. This will begin the process of upgrading your devices. Please keep in mind that your cameras and recorder will reboot and go offline for a short time. After starting the upgrade, it is recommended that you close the app for fifteen minutes to allow for the upgrade to take place.

UNV NVR Cloud Upgrading Guide

Read More :

1. How to set PTZ control? UNV Device
2. Advanced Uniview IP Camera Guide
3. Uniview Software Firmware Download

Cloud Upgrading the Firmware of Your UNV Cameras from Your UNV NVR

Overview

Updating your camera firmware ensures that you have the latest and more functional cameras you possibly can. This tutorial will guide you through the steps needed to upgrade your cameras via the cloud from your UNV NVR.

Prerequisites

This tutorial assumes you have already initialized your NVR and connected it to the internet. If you have not yet done so, please CLICK HERE for our tutorial section to learn how to do so.

Step 1

Right click anywhere on the Live View screen. A small pop-up menu will appear. At the top, click “Menu.”

Step 2

Sign into the admin account using the username of ‘admin’ and the password you created while initializing the device.

Step 3

Once you have signed in, you will be greeted with the main menu of the NVR. On the left-hand side, click “Camera”.

In the submenu, click “Camera”.

At the top of the screen, you will have three tabs. Click the “Advanced” tab.

Step 4

Select the cameras you want to update by clicking the checkbox next to the camera’s name. You may also select the top checkbox to select all cameras.

Step 5

Once you have selected your cameras, click ‘Chew New Version” at the bottom of the screen.

Step 6

If there are upgrades available, the “By Cloud” button will light up. Click the ‘By Cloud” button to begin your upgrade.

Step 7

You will be prompted to confirm the upgrade to your cameras. Please be aware that your cameras will need to reboot in order to complete their upgrade. Please allow for up to 15 minutes for your cameras to upgrade and reboot.

Cloud Upgrading Your UNV NVR/Cameras from the Web

Overview

Keeping your UNV NVR and cameras up to date is a great way to ensure that your unit runs smoothly and efficiently. This tutorial will guide you through the steps needed to cloud upgrade your UNV NVR and cameras.

Prerequisites

This tutorial assumes you have already initialized your NVR and added it to your EZCloud account. If you have not done so already, please CLICK HERE to visit our tutorial section on how to do so.

Step 1

Navigate to your NVR on your web page. You can do this by accessing it via the EZCloud or by the local IP address. If you are unsure how to do this, CLICK HERE for a tutorial on how to do so. Please keep in mind that if you access your NVR via the local IP address, it will ask you to log in. This log in is the same username and password you created for your NVR directly.

As you can see in the figure below, this particular NVR was accessed via the EZCloud, meaning no password was needed to log into the unit.

Once you have reached the Live View screen, click on the word “Setup” at the top of the screen.

Step 2

Once you’re in the setup menu, you will see several options on the left side of your screen. Please click on the “Maintenance” menu to proceed.

Once you have clicked on the Maintenance menu, you will see a small submenu appear. Click on the “Maintenance” submenu to proceed.

Once you have entered the Maintenance submenu, look at the top of the menu. You will see four tabs available, the last one being “Cloud Upgrade”. Click there to proceed.

PLEASE NOTE: Some units with older firmware will not have the “Cloud Upgrade” tab. However, you can still cloud upgrade your firmware. Instead of looking for the tab at the top, look in the maintenance submenu and find a button that says “Check” or “By Cloud”, depending on what firmware you have. This will allow you to upgrade your NVR.

Step 3 (Updating your NVR Firmware)

Once in the Cloud Upgrade tab, you will see two options.

Device Type: This is where you will pick which piece of hardware you want to upgrade. By default, this is set to NVR, meaning you will be upgrading the firmware on your NVR. For the IP screen, skip to Step 5.

Cloud Upgrade: This is where you will check for Updates. To do so, click the “Check for Update” button.

Step 4

If there is a firmware upgrade available for your NVR, you will be prompted with the screen below. To upgrade your NVR’s firmware to the latest version, click “Upgrade”.

Step 5 (Updating your IPC Firmware)

To upgrade your IP Cameras, first select “IPC” for the “Device Type” Row.

Once you have selected “IPC”, click “Check for Update” in the Cloud Upgrade Row.

If your cameras have an upgrade available to them, you will see this reflected in the “Firmware Version/Latest Version” box. As you can see in the figure below, out of the three available cameras, only one has an upgrade, while the others are up to date.

On the left-hand side of your screen, make sure to select all the checkboxes for your cameras. This will ensure that any cameras that need an upgrade will be queued for one.

There are two options for finalizing the upgrade. You may click “Batch Upgrade” in the Cloud Upgrade Row, or you may click the Cloud Upgrade icon in the “Cloud Upgrade” column on the bottom right of the below figure. Typically, if you have multiple cameras with available upgrades, it’s easier to click “Batch Upgrade”.

Step 6

Once you are sure that all available cameras are selected for an upgrade and have clicked the upgrade button, you will see a message pop up on your screen. This message is to confirm that you wish to upgrade your IP Cameras. Click “Okay” to proceed.

PLEASE NOTE: After beginning the upgrade for your cameras, they will need time to update and restart. We recommend leaving the system alone for fifteen minutes to allow for all upgrades to take place and for the devices to restart.

Updating the Firmware of your UNV NVR via the Cloud

Overview

Updating the firmware for your UNV NVR is important to maintain a functional and healthy system. This tutorial will guide you through updating the firmware of your NVR via the cloud.

Prerequisites

This tutorial assumes you have already initialized your NVR as well as connected it to the internet. If you have not done so, please CLICK HERE for our tutorial section to learn how to do so.

Step 1

Right click anywhere on the Live View screen. A small pop-up menu will appear. At the top, click “Menu.”

Step 2

Sign into the admin account using the username of ‘admin’ and the password you created while initializing the device.

Step 3

Once you have signed in, you will be greeted with the main menu of the NVR. On the left-hand side, click “Maintain”.

In the submenu, click “Upgrade”.

At the top of the Upgrade screen, click “Upgrade by Cloud”.

Step 4

At the bottom of the screen, you will see a blue “Check” button. Click the “Check” button to see if there is a newer firmware version available.

Step 5

If an update is available, you will see the new version at the top in the “Latest Version” row. To upgrade your NVR, click the “Upgrade” button on the bottom of the screen.

Please Note: You will be greeted with a popup box that will ask for confirmation. When upgrading your NVR, your NVR will need to reboot. Once clicking “OK”, allow up to ten minutes for your NVR to upgrade and reboot.

<p>The post UNV NVR Cloud Upgrading Guide first appeared on NVR IPCAMERA SECURITY.</p>

1, RTSP to add
1、main stream：rtsp://ip address/11
2、vice stream：rtsp://ip address/12
Find “FFMPEG (H264)” this column, fill in information of RTSP in the URL.After adding can test is successful

Go to “Camera” option.

Input your camera ip address, User name and Password, click “Finish”, add camera succeed.

PDF Download : How-to-add-CamHi-camera-to-Ispy-下载

CamHi Pro Tutorial Guide

Read Next : V380 IP Camera Installation Manual

The difference between camhi and camhipro

The camera can use camhi and camhipro app at the same time, camhipro’s interface design is more modern, except for the interface there is no other difference, the functions are the same.

CamHi Instructions for use

The following tutorials are only available for the CamHi app.

How to add the camera

Warm Tip: This product only supports 2.4 GHZ WIFI. Before adding devices, make sure that your router is 2.4 GHZ WIFI, and your mobile phone is connected to 2.4 GHZ WIFI.

First, connect the camera power supply. After about 40S, you will hear the device tinkling sound. If you do not hear the tinkling sound, please press RESET 10S at the device base. If the equipment does not have audio, please judge by time.

Note:

1. Please use the power adapter matched with the camera to avoid damage to the equipment.
2. Don’t plug in wiring for power-on equipment; (After plugging in wiring, you can’t configure WIFI with one key)
3. One-click configuration WIFI only supports some models, and some models do not support one-click configuration WIFI.
4. Box camera, Dome camera and other models use connection hotspots to configure WIFI. See AP connection operation instructions for details.

Wired connection (only applicable to the equipment with internet access)

(1) Please connect the network cable and the equipment cable interface. The other end of cable connects the router, and the camera is on, waits the startup and completes the self-inspection (If you fail to self-check, please press the recovery key for a long time to restore the factory settings.).

(2)Click “add camera” on APP’s main interface to select “add UID by scanning QR code” (QR code above XXXX-XXXXXX-XXXXXX out of the machine body) or “LAN search UID” after the mobile phone connects the WIFI.

(3) Click the modelxxxx-xxxxxx-xxxxx of camera occurred in the camera list.

⑷ Return to the camera list by clicking “√”, then the camera is displayed online, and conduct the preview by clicking the camera.

Wirelss Installation(only for devices with WIFI modules)

After installing the mobile phone software, the mobile phone connects to WIFI, clicks Add Camera >Wireless Installation> Enter WIFI Password >Do you hear the sound? The system will be equipped with WIFI if it has been selected properly. When the WIFI configuration is successful, there will be voice prompt. (If you don’t have audio equipment, please see the picture prompt)

(1) Network Camera in Network; Select the corresponding UID

(2) Enter the camera password (the default password for the camera is admin).

(3) Click the completion button in the upper right corner to complete the addition of the camera.

Hot-spot connection (only suitable for devices with WIFI modules)

(1) The camera is powered on and waits for the completion of the self-inspection (if it fails to do so, press the recovery key for a long time to restore the factory settings).

(2) Open the WIFI search, choose the name of WiFi beginning with IPCAM-xxxxx, and enter the original password 01234567 (if you change your password, enter your modified password) as follows:

(3) After successful connection, the method of use is the same as that of wired connection.

4G Connection (only for devices with 4G modules)

(1) 4-G hot spot connection is shown below. After completing the 4-G hot spot wireless connection, the second step of Anzhao wired connection method begins to connect the device, close WiFi, open data flow, click on the device to connect, or scan the serial number of the fuselage (SN two-dimensional code above the fuselage) to connect, click on the camera to preview, such as Figure:

Function introduction

Introduction to real-time preview interface

1.Mirroring inversion + picture reversal

2.Lens zooming-in+ zooming-out and focus

3.Setting and invocation of presetting bit

4.Camera mode (infrared mode +full-color pattern + intelligent model)

5.Off

6.Sound opening and speech pattern

7.Quick photo

8.VCR

9.HD model

Cloud deck and presetting

1. Cloud platform control

⑴ Click the sliding screen on the real-time watching interface to control the camera rotation.

2. Presetting

⑴ Click the presetting icon and enter the presetting management interface.

⑵ Add the presetting: Several presetting could be added with the limit of 255.

⑶ Delete the presetting: Edit the set presetting by clicking.

The preset shortcut command table

PTZ Dome Camera Instruction List

2.5 Inch WI-FI Dome Camera Instruction List

Function	Mode Of Operation	Function	Mode Of Operation
Camera universal address	Address code 255	group first cruise preset 1-8（Dwell time 5 seconds）	Call 65 Preset
Enable Preset cruise line	Call 71 Preset	group second cruise preset 9-16（Dwell time 10 seconds）	Call 66 Preset
A cruise preset for 4 seconds	Call 75 Preset	group third cruise preset 17-24（Dwell time 15 seconds）	Call 67 Preset
A cruise preset for 8 seconds	Call 76 Preset	group fourth cruise preset 25-32（Dwell time 20 seconds）	Call 68 Preset
A cruise preset for 10 seconds	Call 77 Preset	group fifth cruise preset 33-40（Dwell time 30 seconds）	Call 69 Preset
A cruise preset for 15 seconds	Call 78 Preset	Group sixth fourth cruise preset 41-48（Dwell time 60 seconds）	Call 70 Preset
A cruise preset for 20 seconds	Call 79 Preset	group seventh cruise preset 49-56（Dwell time 90 seconds）	Call 72 Preset
Set the limit point A left	Call 91 Preset	group seventh cruise preset 57-64（Dwell time 120 seconds））	Call 73 Preset
Set the limit point B right	Call 92 Preset	clear all of the presets	Call 77 Preset
To enable A, B two scans	Call 93 Preset	Start A ,B Low speed scan	Call 87 Preset
To clear A, B two scans	Call 94 Preset	Start A ,B medium speed scan	Call 88 Preset
A 360 – degree scan, and A, B two scanning speed	Call 65、66、67、68 Preset,  the corresponding rate of 3, 6 degrees per second, 9, 15 degrees and 40 degrees	Start A ,B fast scan	Call 89 Preset
clear all of the presets	Call 60 Preset	clear all of the preset	Call 90 Preset
360 degree scans  （Only applicable few model）	Call 99 Preset	Restore the factory	Call 94 Preset
Forced light off （Only applicable few model）	Call 88 Preset
Forced light on  （Only applicable few model）	Call 89 Preset
Auto control light  （Only applicable few model）	Call 90 Preset
Restore the factory	Call 96 Preset

Video playback and Download

Warm Tip: To watch and download remote videos, SD cards need to be inserted, while local videos are saved in the APP installation device.

1. Select the local or remote video to play, and control the playback speed. For example, select the local video, as shown in the figure:

2. Remote Video Download

Click on the video file in the video list interface, then click on download, the video file will be downloaded automatically. The downloaded video file will be saved in the local video-download interface. After the video download is completed, you can click on continue to download, continue to download other video files, or click to view, and automatically jump to the download record. Like an interface.

3. Remote Video Search
   In the video list interface, Search options are available to Video file length: 15-900 seconds can be set, default is 600 seconds.

select the video search range as needed.Note: Set the setting range on the reference software interface.

Note: Some models only support 15-600 seconds.

Alarm Setting

1.open the Alarm Setting

2.The Level settings;

High: Sensitivity value is more than 75;

Medium: Sensitivity value is about 50

low: Sensitivity value is less than 25.

Action with Alarm

1.Alarm Notification

Choose to turn on, indicating that the alarm will send a push message to the mobile phone.

2.Alarm SD REC

Select Open to Save Alarm Video to SD Card

3.E-mail Alarm with Pictures

Select to open, indicating that the alarm sent pictures to the designated mailbox

4.Save pictures to FTP server

Select Open to save alarm pictures to designated FTP server

5.Save videos to FTP SERVER

Select Open to send alarm video to designated FTP server

6.Picture num

Picture capture number 1-3 can be set up (part of the model support)

7.Set alarm ringing linkage

Choose to turn on, indicating that the camera will give an alarm sound when alarming, the type of sound, the duration of the call can be selected (part of the model support)

FTP Setting

1.Server Address：Fill in the erected FTP address.

2.Server Port：Fill in the port of FTP.

3.User Name and Password Fill in User Name and Password Setted in FTP Server.

4.After filling in, click the APPLY; finally, you can click the TEST FTP SETTOMGS to check whether you can send the picture to the FTP server.

Audio Setting and Video Setting

1.Audio Setting

⑴Linear input and microphone input settable.

⑵When the audio input type is microphone input, the input volume and output volume are 80 and 95, respectively, and some models are 14 and 9.

⑶When the audio input type is linear input, the input volume and output volume are 10 and 95, respectively.

2.Video Setting

⑴Bit Rate

The rate of the first bit stream and the second bit stream of the device can be customized.

⑵Frame rate

Frame Rate of First and Second Bit Streams of Customizable Devices.

⑶Image quality

1-6 can be set, default is 1, the smaller the value, the better the image level, the larger the bit stream.

⑷Video format

50 Hz and 60 Hz settable.

Email Setting

Send e-mail to QQ e-mail as an example:

1. Smtp Server: smtp.qq.com

2.Server port: 465

3.Encrypt Type: SSL

4.User Name and Password Fill in QQ Account and Authorization Code

5.Send To: Mailbox for Receiving Alarm Pictures.

6..Sender : Sender’s mailbox address, here is QQmailbox, for example.

QQ mailbox address should be filled in; (same as user name).

7.Subjects and information can be filled in at will.

8.After filling in, click the application button, and finally click the test button.Check if you can send an alarm message.

Local Picture

1.Click on the icon and enter the local picture sub-ID of the picture playback interface to save the click Edit to delete the picture.

2.Select the image you want to delete and click the button.

Camera Setting

Manual Download

PDF Manual Download : CamHi Instructions for use – Camhi下载

Camera list display mode

Click the camera list interface icon  to select the camera list in large or small image mode.

Sidebar settings

Click the camera list interface button, or swipe the screen to the right in the camera list interface to enter the APP sidebar. The APP name is displayed on the sidebar. the below displays APP version.

• Local file

Click Local File to enter the local file interface. This interface displays all the local videos and pictures saved by this camera on this phone. Click on the file to playback the video file or view the local picture. Click the Edit button to delete the file.

• More

Click the More button to check whether the APP has obtained the notification permission of the mobile phone. If the display is not enabled, the APP cannot send the alarm push message. Clicking enabled, you can jump to the setting interface to open the notification permission.

Video/Image search and view

Local recording playback and download

Find the camera to be viewed in the camera list interface, click the icon, select the recording page, the recording file will be displayed, you can sort according to the size and length of the video file, click the button, you can save the video file to the mobile phone album. Click the edit button, it can delete the selected video file.

View local snapshot images

Click on the image page in the local file interface, the local snapshot images will be displayed, the images will be sorted according to the capture time, click the preview thumbnail to view the image, click the button, you can delete or save the image to the album.

Remote video playback and download

Remote video playback

Click the button “camera list interface” to enter the remote recording list interface. The APP searches for the last 6 hours of video files by default. You can customize the sorting according to the recording time, click the video file, and then click play to playback the video files in the SD card of the device.

Remote video download

Click on the video file in the recording list interface, and then click Download, the video file will be downloaded automatically. The downloaded video file will be saved in the local recording interface. After the video download is completed, you can click to continue downloading, continue to download other video files, or click view, will jump to the local recording interface automatically.

Remote video search

Click the button on the recording list interface, the search option appears, you can select the recording search range as needed.

Search time range is optional

Function settings

When the camera is online, click the camera list interface or the live interface icon to enter the camera parameter setting interface.

Basic settings

Wifi settings

Display the WIFI network connected to the current device

Click to get the wireless network around the device, the device will search for the WIFI network in the current environment automatically; select the password to configure the WIFI of the current device.

Change password

The access password of the camera can be modified. When ticking display password, the password will be visible.

Alarm settings  

Alarm management and notification

• Alarm push

Select On to indicate that a push message will be sent to the phone when alarming.

• Device alarm

1.Motion detection alarm

Select On to indicate that the device has enabled motion detection. Clicking adjust motion detection, it can draw motion detection area and adjust motion detection sensitivity (This function is suitable for some models.)

2.Sound alarm

Select On to indicate that the device with microphone function. When the surrounding sound is greater than the intensity of the device check sound, trigger an alarm, click to adjust the sound alarm, you can adjust the sound alarm sensitivity

Alarm Linkage

• Alarm capture to SD card

Select On to indicate that the alarm capture picture is saved to the SD card.

• Alarm recording to SD Card

Select On to indicate that the alarm recording file is saved to the SD card.

• When the alarm is triggered, the device issues a siren

Select on to indicate that when alarming the camera will sound an alarm. Siren type and the duration of the siren is optional

Email alarm linkage

Select On to indicate that the device will trigger the alarm and send a picture to the mailbox. Click Configure Email to set the mailbox information.

Send an email to the QQ mailbox as an example:

Smtp server: smtp.qq.com

Port: 465

Secure connection: SSL

Username: QQ number of the outbox

Password: Authorization code of the outbox QQ mailbox

Receiving address: the mailbox that receives the alarm picture

Sender address: sender email address, here is the QQ mailbox as an example, you need to fill in the QQ email address (consistent with the user name). Subjects and content can be filled in casually. After filling out, click the Apply button, then click the Test button to check if you can send an alarm email.

FTP alarm linkage

1.Alarm recording is saved to FTP

Select On to indicate that the alarm recording file is saved to FTP.

2.alarm capture saved to FTP

Select On to indicate that the alarm capture image is saved to FTP.

Click Configure FTP to set FTP information.

Server address: Fill in the erected FTP address

Port: Fill in the FTP port

Username and password: Fill in the username and password set in FTP

After filling in, click the Apply button, then click the Test button to check if you can send an alarm picture to FTP.

Picture capture number setting

You can set the number of alarm capture pictures, 1-3 sheets are optional

This function is suitable for some models.

Audio/Video management

Video settings

• Code rate

Can customize device’s code rate of first code stream and second code stream

• Frame rate

Can customize device’s frame rate of first code stream and second code stream

• Code level

1-6 can be set, the smaller the value, the better the image level, the larger the code stream

• Video system

50Hz and 60Hz optional

Audio settings

• Input volume

Adjust the input volume of the device

• Output volume

Adjust the output volume of the device

SD Card recording and capacity

SD Card plan recording

• Whether to enable recording

Select on, the device will save the recording to SD card

• Recording file time

Can adjust the length of each recording file manually.

• Recording time period

1.Simple settings

Select Simple settings, the recording time period defaults to Monday-Sunday full-day recording.

2.Advanced settings

Select advanced settings to customize the time period for each day of recording manually

Enter the advanced settings interface, click the quick edit button, select the time period to be recorded, you can customize the recording time period; edit it, clicking the Finish button to save the settings.

SD Card settings

Can view the total space and free space of the device SD card, can format SD card

System settings

Device time settings

1、Synchronize device time to phone time

2、The device time zone can be set. After the time zone is set successfully, the device will restart automatically.

Initial settings

• Restart the device

The camera will restart after clicking

• Restore factory settings

The camera will reset after clicking

Device information

Can get the device information of the camera: including device name, device type, Network type, number of user connections, software version, IP address, Subnet mask, gateway, DNS, etc.

Check for updates:

After clicking, the camera will check the firmware version automatically. If there is a new version, it will prompt for updates, click to upgrade online

(This function is suitable for some models)

Function description of live broadcast interface

Ordinary camera interface

The ordinary camera monitoring interface is displayed in the small screen mode by default. The function selection button is displayed at the bottom of the screen. More function keys can be called to slide to the left in the blank space. The function description of the buttons is shown in the figure below.

Note: Some functions require device support

PTZ function:

For devices with PTZ function, use your finger to swipe the live video, the camera will rotate according to the direction of the finger.

Exit the live interface:

Press the blank space and pull down on the small screen interface or click the back button to exit the live interface.

Panoramic camera interface

The panoramic camera will have different live broadcast interfaces depending on the model. It subjects to the connected model. The key function description as following:

Exit the live interface:

Press the back button to exit the live interface

View the camera

After adding the camera for a few seconds, wait for the camera to connect to the camera automatically, prompt the online description to view the camera video, click on the camera that displays online to enter the camera live interface.Camera status description:

Connecting: At this time, the camera is establishing a connection with the network camera. According to different networks, the connection time is different.

Online: This status indicates that the device is connected properly; click to view the video;

Not connected: This status indicates that the device is offline

Password error: This status indicates that the camera login password is wrong. Clicking on the camera in this state will pop up the Change Password dialog box.

Add camera

Install the APP, connect the mobile phone to the WIFI network, enter the APP and click the Add Device button to enter the Add Device interface. If it is the first time to use or restore the factory settings: the camera is not connected to the network, clicking the new device; the camera that has connected to the network, clicking on the device in use

New device add

After clicking the “New Device” button, power on the device, wait for about 30 seconds, confirm that the device is working, click next.

Connected to Network cable

If the device is connected to the network cable, click the “Connected Network Cable” button, the APP will search for the UID of the device in the current LAN automatically. Selecting the UID to be added and click the Add button, the device will search for the nearby WIFI signal automatically to enter the wireless configuration interface. Enter WIFI password, click “Configure wifi and add”, after WIFI configuration successfully, jump to the device list interface; if you do not want to configure WIFI temporarily, click the “Do not configure, directly add” button, adding camera fter confirmation.

Un-connected to Network cable

If the device is not connected to the network cable, click the “Un-Connected to Network Cable” button to enter the interface for selecting the network type.

Sound wave configuration network support equipment: PTZ Camera, Card type camera, Bulb camera, Small flying saucer camera, etc.

AP configuration network support equipment: Box camera, PTZ Camera, Speed dome camera, Big flying saucer camera, etc.

Sound wave configuration network

When the power is turned on, the device will enter the waiting state, and the device will send out a “beep” sound intermittently. Click Next to scan the QR code of the device UID number with the mobile phone. If there is no QR code, click Skip. Enter the password of the WIFI signal to be configured, click to start the sound wave configuration, the system will configuration WIFI automatically. After WIFI configuration successfully, there is a voice prompt

AP configuration network

When the network cable is not connected, turn on the power, click to add, the APP will search for hotspot signals of nearby cameras automatically. The hotspot format is IPCAM-XXXXXX, the password defaults to 01234567. Selecting the hotspot of the camera to be added, clicks connect. After connecting successfully, enter the device add interface, click Add, enter the wireless configuration interface, enter the router’s WIFI password, click “Configure wifi and add”, after WIFI configuration  successfully, jump to the device list interface; if you do not want to configure WIFI, click the button ” Don’t configure, add directly”, add camera after confirmation.

Note: AP configuration network needs to open the phone’s GPS function first.

Add device in use

Scan QR code

Generate a QR code by using the online QR code generation tool, and then scan the QR code through the mobile APP to scan and add.

Search for nearby devices

1、Click the button “Search for nearby devices” to search for the ip camera in the wireless network where the phone is located, and select the corresponding UID.

2、Enter the camera password (the camera default password is admin)

3、Click the button “Add” to add a camera.

Delete camera

In the device list interface, long press the camera to be deleted or click the button “setting” to enter the camera setting interface, click the button “delete device” to delete the added camera.

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function. Settings like below.

The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page. When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size. After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:
send alarm and pictures to email
send captured pictures to assigned FTP server
send video recording to assigned FTP server
capture a picture, then save to TF Card
Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)
linkage Preset: after the alarm, call preset
alarm capture quanity, setting as required (1-3 pieces)

If you want set Email alarm, please tick ”E-mail Alarm and Send with Picture”. and then click “Email setting”

3. Setting Email

The items in above picture is mandatory fields need to fill in. If the filled content is not qulified, the setting will not be successful. After writing completed, click Apply firstly, then testing, it will reminder testing successfully when finished.

Note:

1. The server of sending email should support POP3 protocol. In order to strengthen security and reduce spam, Many mail server closed this protocol at present. So users need to check if the server support POP3 before choose mail server, otherwise the mail can not send successfully.
2. For some mail server using SSL certificate, it must enable SSL option, then can send email successfully.
3. Some mailboxes require additional security settings, such as Gmail messages, you need to log in to your google account, open to allow less secure apps in “Sign-in & security” page.

If your Gmail mailbox opened “2-Step Verification”, then you need to set up a separate “app passwords” for camera login,

How to set up “app password” you can click on the “Learn more” to get help

If you do not know the security settings of other mailboxes, we recommended use Gmail.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

How to set alarm to upload pictures and video to the FTP server

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function.

Settings like below. The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page.

When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size.

After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:

send alarm and pictures to email

send captured pictures to assigned FTP server

send video recording to assigned FTP server

capture a picture, then save to TF Card

Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)

linkage Preset: after the alarm, call preset

alarm capture quanity, setting as required (1-3 pieces)

If you want set alarm to upload pictures and video to the FTP server, please tick ”Save Picture on the FTP Server” and ”Save Video on the FTP Server”. and then click “Email setting”

3. Setting FTP Server

Note: If using FTP function, you need to apply the user name and password from FTP Server firstly, and apply a certain storage space at the same time, also asking the user have anthority to write and build sub-directory to storage space.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

Timing capture and timing record of SD card

1.Timing capture

Choosing “save image to SD Card” or “save images to FTP server”, at a regular interval (can be set like above picture), the device will capture images saving to SD Card.

Click “FTP” into set FTP

Note: If using FTP function, you need to apply the user name and password from FTP Server firstly, and apply a certain storage space at the same time, also asking the user have anthority to write and build sub-directory to storage space.

2. Timing record

Video file duration: can set video file duration, default is 600 seconds.

Open video: can choose whether open video to TF Card

Stream: can set recording stream

recording time: set timing recording time as required

then confirm the camera support SD card and insert SD card, as shown in below picture:

How to view pictures card and download video of SD

Click “SD card” button in IE home page of camera.

Page will display the date of picture and video, select date.

Images folder to store pictures, record folder store videos.

Open images folder, click the images file name directly view picture.

Open record folder, click the record file name to download video.

CAMHI IP Camera Port mapping setting method

1. Please setup the IP address to be Static IP address.

2.Please modify HTTP port number.

The device HTTP port mapping to the external network router,
“External ports”: This port is corresponding to the access requirement of outside network
“Internal Port”: port for this equipment
“Service agreement” selects “ALL”
“IP address”: LAN IP address of the camera.

NOTE:
If your router supports UPNP function, you can also use UPNP port mapping automatically.
UPNP stands for universal plug and play, if you started UPNP, once the IP camera was connected into the LAN, it will communicate with the router of the LAN.
It will request the router to open a port to forward its own port. User doesn’t need to log in the router to set the port forwarding.

users in the use of the function, need to confirm a router also is enabled UPNP; Because many router model, not necessarily can very good support UPNP, testing and supporting the router is very good with, or suggest not start the function. At present test and TP-LINK router cooperate good.

<p>The post CamHi Pro Tutorial Guide first appeared on NVR IPCAMERA SECURITY.</p>

IMPORTANT: If you are unable to verify the status of your device’s firmware, please call our Technical Support at 1-888-425-6739.

Recorder

To check if you have the latest firmware on your recorder, please follow these steps:

Step 1. Go to Main Menu > Settings > System > Upgrade.

Step 2. In the Upgrade settings, click Check for Updates.

Step 3. If there is an available update for your recorder, please proceed with upgrading your firmware. If not, you will get a message that you have the latest firmware.

IMPORTANT: To receive automatic updates, make sure the box is checked next to Automatically Check for Updates, then click OK.

Lorex Home App

To check if you have the latest firmare on your Lorex Home app, please follow these steps:

Step 1. Launch the Lorex Home app.

Step 2. Tap more or the three dots to go to Device Settings.

Step 3. Tap Firmware.

Step 4. If there is an available update, please proceed with upgrading your firmware. If there is no new firmware available, the Latest version will just be empty.

IMPORTANT: All Lorex firmware updates are free of charge.

There are two ways of upgrading the firmware of your recorder: USB Upgrade and Cloud Upgrade.

Part 1 – USB Upgrade

For this procedure, you need (1) the latest firmware for your recorder, (2) a formatted and empty USB flash drive, (3) access to a computer with internet connection, and (4) a valid email address.

Step 1. To upgrade your recorder to the latest firmware, call our Technical Support at 1-888-425-6739 and request for your recorder’s latest firmware. When calling, make sure you have your recorder’s the correct model number and a valid email address at hand. We will send the firmware download link via email. NOTE: The download link will expire in a specified period of time.

Step 2. Next, format your empty USB flash drive using your recorder. IMPORTANT: We highly recommend that you format your USB flash drive using your recorder. To format your USB flash drive using your recorder, please read the full instructions here.

Step 3. Once you have successfully formatted your USB flash drive, remove it and insert it into your computer’s USB port and download the firmware we sent via email.

Step 4. Verify that you have the correct firmware, then remove the USB flash drive from your computer, and insert it back into one of the USB ports on your recorder.

Step 5. On your recorder, go to Main Menu > Settings > System > Upgrade.

Step 6. In the Upgrade settings, click USB Upgrade.

Step 7. In the popup window, select the firmware that you have previously downloaded for your recorder.

NOTE: Make sure to select the file with .bin extension. See image below.

Step 8. Then, at the bottom of the screen, click Start to begin the upgrade.

WARNING: Please DO NOT turn off the power during the firmware upgrade. Wait until the unit reboots and display the new live view.

Congratulations! You have successfully updated the firmware of your recorder.

Part 2 – Cloud Upgrade

To upgrade your recorder’s firmware via Cloud Upgrade, it is necessary to connect the recorder to your network.

Step 1. Go to Main Menu > Settings > System > Upgrade.

Step 2. In the Upgrade settings, click Check for Updates.

Step 3. If there is an available update for your recorder, please proceed with upgrading your firmware. If not, you will get a message that you have the latest firmware.

IMPORTANT: To receive automatic updates, make sure the box is checked next to Automatically Check for Updates, then click OK.

<p>The post How to Lorex devices firmware updates first appeared on NVR IPCAMERA SECURITY.</p>