CCTV default password – NVR IPCAMERA SECURITY https://www.nvripc.com CCTV Help Desk Blog! Wed, 25 Jan 2023 17:55:04 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.nvripc.com/wp-content/uploads/2024/04/cropped-icons8-camera-91-32x32.png CCTV default password – NVR IPCAMERA SECURITY https://www.nvripc.com 32 32 Arecont Vision Password Reset https://www.nvripc.com/arecont-vision-password-reset/ https://www.nvripc.com/arecont-vision-password-reset/#respond Wed, 25 Jan 2023 17:55:04 +0000 https://www.nvripc.com/?p=3750 Arecont Vision Password Reset All models Issue: A password has been set on a camera and neither the customer nor integrator knows it. For best results see the below: Once a nonce file has been generated, do not do anything with the camera (i.e. power cycle it) until you are ready to apply the key files. […]

<p>The post Arecont Vision Password Reset first appeared on NVR IPCAMERA SECURITY.</p>

]]> Arecont Vision Password Reset All models

Issue:

A password has been set on a camera and neither the customer nor integrator knows it.

For best results see the below:

  • Once a nonce file has been generated, do not do anything with the camera (i.e. power cycle it) until you are ready to apply the key files. If the camera was power down before the reset code was applied then a new Noncefile will have to be generated and reapplied.
  • Nonce files are valid for approximately 24 hours. If it does not work reach out to technical support.
  • Directly connect to the camera with a PoE injector for the best results.
  • Disable any firewall or security software on the workstation.
  • Disable sub-interfaces on the Ethernet adapter
  • Disable any wireless adapters.
  • IMPORTANT: If the camera says “Inaccessible” your workstation is not in the same network range as the camera. Change the workstation to match the camera and delete IP address from the “Advanced TCP/IP Setting” menu. Relaunch AV IP Utility and it should say “Pwd Protected.”
  • IMPORTANT: We have encountered issues resetting passwords over Ubiquiti Wireless networks. If a password reset fails, connect directly to the same physical switch as the camera.
  • IMPORTANT: For Verint Systems, remove the camera from the VMS then attempt a password reset. Password resets performed while connected to a Verint system have failed.20201106_1861.png

Resolution:

  1. Download and install AV IP Utility: https://sales.arecontvision.com/software.php
  2. Click on a camera. If needing a password reset for multiple cameras, press CTRL and click on each camera needed. It/They should be highlighted blue.
  3. Click Passwords > Reset Passwords > Create Nonce / Magic Code File.20191015_171.png
  4. Save and email this file to Technical Support (support@arecontvision.com).
    • Do not do anything else with the camera until you upload the file provided by Technical Support.
  5. Click Passwords > Reset Passwords > Reset Passwords.
    20191015_172.png
  6. Click Yes.
  7. Click OK.
  8. Locate the key that was provided by Technical Support and click Open.
  9. The camera status should change from Pwd Protected to Accessible within 30 seconds.
  10. If the password reset fails you will need to follow the instructions here: Password Reset Failure

Arecont Vision Password Reset

Password Reset Failure

Problem

The key file fails to erase password, even with admin rights and after the ARP Table confirms routing.

Resolution

You can deploy firmware as an alternate way to reset a camera’s password, but you must use an older version of deployment software “without authentication”.

Note: Before updating firmware, stop all streams and views from the camera.

  1. Download and extract the attached firmware loader utility to your desktop (attached below).
  2. Right-click FirmwareLoader.exe and select Run As Administrator.
  3. Select Find Cameras — This creates a firewall exception for the tool as well.
    1. If the camera is found: Increase the camera’s timeout to 1000.
    2. If the camera is not found: Enter the camera’s IP Address and Increase the timeout to 1000.
  4. Select Upgrade Firmware.
  5. Find and select the firmware you want to update to (in most cases, this is the same version as currently installed on the camera).
  6. Select Open. The update may take some time to complete.

Use a constant ping to monitor for a reply from the camera to confirm the process has completed. The camera should no longer require a password. If you can go to the camera’s IP address in a web browser without being prompted for user and password, the process was successful.

Default Passwords for Arecont Vision Cameras

Issue:

The integrator or customer does not know the default login for the camera.

 

Resolution:

  • Arecont Vision cameras at version 65215 or lower do not have passwords set by default.
  • Arecont Vision cameras at version 65216 or higher must have a password set the first time the camera is set up. See Initial Password – Unable to set a password
  • The ConteraIP Fisheye Series is the exception. The defaults for it are below.
    • Username: admin
    • Password: AVCostar

Read Next : Current CCTV default password List NEW

Costar Utility: Password Reset

Issue:

AVIP Utility does not show the camera being password-protected even though the web page prompts for a login.

Resolution:

NOTE: The reset operation resets the password and call camera settings to their defaults.

  1. Download Costar Utility from here: https://sales.arecontvision.com/software.php
  2. Follow the steps here to install the program: Costar Utility: Install and Uninstall
  3. Launch Costar Utility and wait for the auto-discovery to complete.
  4. Highlight the camera > Click Reset Password > Create Nonce/Magic Code File.202012071989.png
  5. Save the Nonce file to your PC.20201207_1990.png
  6. Click OK.
  7. Email this file to support@arecontvision.com.
  8. TAC will reply with a key file or recover file depending on the camera model.
  9. Highlight the camera > Click Reset Password > Reset Password Using Key File.202012071991.png
  10. Click Yes then click OK.
  11. Locate the key file then click Open.20201207_1992.png

Initial Password – Unable to set a password

Issue:

A brand new out of box camera displays the initial password screen. Multiple attempts to set a password fail.

20200724_1338.png

Resolution:

Due to the wording, the vast majority of people reporting this issue are not using a special character.

The password requirements are below:

  • 8 -16 characters
  • At least (1) upper case letter.
  • At least (1) lower case letter.
  • At least (1) number.
  • A special character (such as ! @ or $) is REQUIRED.
  • These special characters cannot be used
    # % & ‘ ” < > / [ ] { } _ ( ) = . + ,

Firmware v65214 or higher will now show the below as requirements.

20220315_3523.png

How to factory default a ConteraIP Omni LX

Issue:

  • Forgotten Password
  • Hardware/software

Environment:

  • Omni G5
  • AV20576DN-xx

Procedure:

Reset to Factory Default

  1. Press and hold the reset button for 2 to 5 seconds, then release the reset button.
    This resets the camera to the factory default except for the network settings.
  2. Press and hold the reset button for more than 5 seconds, then release the reset button.
  3. This reset the camera to the factory default, and this resets the network settings to the factory default.
    cam_reset.JPG
  4. The user can also reset the camera to factory default via the camera web interface or the AV Costar Utility. Costar Utility: Password Reset

ConteraVMS: Thick client installation

Issue:

The ConteraVMS thick client needs to be installed on a customer’s workstation.

Resolution:

Download the ConteraVMS Thick Client here: https://sales.arecontvision.com/software.php

Note: The thick client requires a Windows x64 bit OS.

  1. Right click on the installer and select Run as Admin. Click Yes if prompted by UAC.
  2. Accept the license agreement and click Next.20190826_293.png
  3. Click Install.
    • If this is an upgrade you can choose to wipe out all settings by putting a check mark next to Perform a clean installation.20190826_294.png
  4. Click Close.
  5. Login with [Username: admin Password: 1234]
    • Note: This is a local account on the workstation used to initially configure the client. This is not the login you will use for viewing video.20190826_299.png
  6. Enter a new password and click Save.20190826_301.png
  7. Click Setup.20190826_309.png
  8. Provide a name for the server and the IP address. Click Save then click Close.
    • If you want the system to automatically connect you can supply the username and password provided by your ConteraWS Administrator under Authentication.20190826_305.png
  9. Double click the server and enter the username and password provided by your ConteraWS Administrator. Click Login.20190826_307.png
  10. Click on a camera to populate the view.20190826_308.png

<p>The post Arecont Vision Password Reset first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/arecont-vision-password-reset/feed/ 0 Password Reset for Night Owl DVR/NVR https://www.nvripc.com/password-reset-for-night-owl-dvr-nvr/ https://www.nvripc.com/password-reset-for-night-owl-dvr-nvr/#respond Mon, 07 Nov 2022 06:00:55 +0000 https://www.nvripc.com/?p=3556 Night Owl Protect Password Reset Password Reset for Night Owl DVR/NVR Don’t remember the password for your Night Owl Protect device? Follow the simple instructions below to quickly and securely reset your device password without having to contact support.   Option 1 – Reset Your Password from the App NOTE: Ensure the DVR / NVR is […]

<p>The post Password Reset for Night Owl DVR/NVR first appeared on NVR IPCAMERA SECURITY.</p>

]]>

Night Owl Protect Password Reset

Password Reset for Night Owl DVR/NVR Don’t remember the password for your Night Owl Protect device? Follow the simple instructions below to quickly and securely reset your device password without having to contact support.

 

Option 1 – Reset Your Password from the App

NOTE: Ensure the DVR / NVR is powered on and connected to the Internet so it can receive the new password once you change it.

If you forgot your device password and are logged into the DVR / NVR with your Night Owl Protect account credentials, you can easily reset your password from the app. To do so:

  1. Open the Night Owl Protect App on your Smart Device.
  2. Tap “Forgot your password?” on the Sign In screen.
  3. Retrieve the temporary code sent to the email address registered to your Night Owl Protect Account.
  4. Enter the temporary code.
  5. Create a new password and verify it.
  6. Tap “Save Password.”
  7. You can now log into your DVR / NVR with the updated password.

Load More : Top 25 CCTV Software Free

Watch the Short Video Tutorial Below

 

Option 2 – Reset Your Password Using Our Secure Web Portal

If you do NOT have your DVR / NVR connected to the Internet and do NOT wish to use the app, you can use our secure password reset portal. To do so:

  1. Click “Forgot password” on the DVR / NVR Login screen.
  2. Go to NightOwlSP.com/NOProtect
  3. Create an account or log in.
  4. Register your device if you have not already done so.
  5. Click on “View Details.”
  6. On the Device Details page, click on “Reset Code.”
  7. Follow the provided instructions to reset your password.

Night Owl X App – Password Reset Instructions

<p>The post Password Reset for Night Owl DVR/NVR first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/password-reset-for-night-owl-dvr-nvr/feed/ 0 Titanium Recorder Password Reset Guide https://www.nvripc.com/titanium-recorder-password-reset-guide/ https://www.nvripc.com/titanium-recorder-password-reset-guide/#respond Wed, 24 Aug 2022 19:24:24 +0000 https://www.nvripc.com/?p=3433 Answer ***Make sure that the system is logged out before trying to do a password reset*** Click on the icon on the lower left hand corner of the screen. Select “Login” Once on the login screen, click on “Retrieve Password” You may answer your security question to unlock the device. Otherwise, Click on “Dynamic Password” […]

<p>The post Titanium Recorder Password Reset Guide first appeared on NVR IPCAMERA SECURITY.</p>

]]> Answer

***Make sure that the system is logged out before trying to do a password reset***

Click on the icon on the lower left hand corner of the screen. Select “Login”

image-1634668819129.png

Once on the login screen, click on “Retrieve Password”

image-1634668829224.png

You may answer your security question to unlock the device.
Otherwise, Click on “Dynamic Password”

image-1634668871983.png

Please have a person at the recorder provide all the information within the Dynamic Password page. Every piece of information has to be identical (Capital letters for MAC address, colons, spaces, etc.) Once this information is provided to a technician, they will provide a code to enter on the last line. The code provided from the technician is a mix of numbers and all capital letters.

image-1634668884551.png

After entering this information, the system will prompt that the password recovery was successful and default the admin password to “123456” or allow you to enter a new one.

image-1634668904210.png

Password Resetting, defaulting a TVT IPC using IP Tool

Answer

Open up the IP tool, make sure that the computer is connected to the same network as the camera.

Select the camera and find the MAC address. Enter the MAC address in the password reset area. After entering it and clicking OK, you will have 30 seconds to power down that camera. Once power cycled, the camera will be back to default settings.

<p>The post Titanium Recorder Password Reset Guide first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/titanium-recorder-password-reset-guide/feed/ 0 Current CCTV default password List NEW https://www.nvripc.com/current-cctv-default-password-list-new/ https://www.nvripc.com/current-cctv-default-password-list-new/#comments Tue, 25 Jan 2022 06:50:41 +0000 https://www.nvripc.com/?p=2981 When you open box of any camera, DVR, NVR or Any other IP Based device, first thing comes in your mind about is the default IP  address and password. Hence this article is all about default CCTV default password. So this article is not limited to a particular “CCTV default password“,  it covers almost all the […]

<p>The post Current CCTV default password List NEW first appeared on NVR IPCAMERA SECURITY.</p>

]]> When you open box of any camera, DVR, NVR or Any other IP Based device, first thing comes in your mind about is the default IP  address and password.

Hence this article is all about default CCTV default password.

So this article is not limited to a particular “CCTV default password“,  it covers almost all the brands but if few brands are missing kindly mention in the comment. I try to cover almost all IP addresses and passwords but few products have a unique code that will mention in their user manual.

Sn. CCTV Company Name Default Username Default  Password Default IP Address
1. Hikvision admin 12345 192.0.0.64
2. TVT admin 123456 192.168.226.1
3. Sony admin admin 192.168.0.100
4. Samsung root 4321 or admin 192.168.1.200
5. Samsung admin 4321 or 1111111 192.168.1.200
6. FLIR admin fliradmin 192.168.250.116
7. Avigilon admin admin no default/DHCP
8. Panasonic admin 12345 192.168.0.253
9. Panasonic admin1 password 192.168.0.253
10. ACTi Admin or admin 123456 192.168.0.100
11. Axis root pass or no set password 192.168.0.90
12. Bosch service service 192.168.0.1
13. Bosch Dinion no set password 192.168.0.1
14. Vivotek root no set password no default/DHCP
15. Arecont Vision admin no set password no default/DHCP
16. Honeywell administrator 1234 no default/DHCP
17. Merit Lilin Camera admin pass no default/DHCP
18. Merit Lilin Recorder admin 1111 no default/DHCP
19. Mobotix admin meinsm no default/DHCP
20. Sanyo admin admin 192.168.0.2
21. CBC Ganz admin admin 192.168.100.x
22. Cisco no default no set password 192.168.0.100
23. CNB root admin 192.168.123.100
24. Pelco admin admin no default/DHCP
25. PiXORD admin admin 192.168.0.200
26. PiXORD root pass 192.168.0.200
27. LTS Security admin 123456 192.0.0.64
28. March Networks admin [leave blank] unknown
29. Messoa admin Model# of camera 192.168.1.30
30. 3xLogic admin 12345 192.0.0.64
31. American Dynmics admin admin 192.168.1.168
32. Basler admin admin 192.168.100.x
33. Brickcom admin admin 192.168.1.1
34. DRS admin 1234 192.168.0.200
35. DVTel Admin 1234 192.168.0.250
36. DynaColor Admin 1234 192.168.0.250
37. Foscam admin [leave blank] unknown
38. IOImage admin admin 192.168.123.10
39. IPX-DDK root Admin or admin 192.168.1.168
40. IQInvision root system no default/DHCP
41. JVC admin Model# of camera no default/DHCP
42. Northern admin 12345 192.168.1.64
43. VideoIQ supervisor supervisor no default/DHCP
44. QVIS Admin 1234 192.168.0.250
45. Speco admin admin 192.168.1.7
46. StarDot admin admin no default/DHCP
47. Starvedia admin no set password no default/DHCP
48. Toshiba root ikwb 192.168.0.30
49. Digital Watchdog admin admin 192.168.1.123
50. Speco root root 192.168.1.7
51. W-Box admin wbox123 192.0.0.64
52. Wodsee admin [leave blank] unknown
53. GeoVision admin admin 192.168.0.10
54. Grandstream admin admin 192.168.1.168
55. GVI Admin 1234 192.168.0.250
56. Trendnet admin admin 192.168.10.1
57. UDP root unknown unknown
58. Ubiquiti ubnt ubnt 192.168.1.20
59. Verint admin admin no default/DHCP
60. Canon root Model# of camera 192.168.100.1
63. Costar root root unknown
64. Dahua admin admin 192.168.1.108

 

So below is the list of CCTV default passwords and Usernames.

1. Hikvision Default Password and IP address

Hikvision one of the best CCTV camera brands all over the world and it has many customers around the world. Sometimes they need to know for the default password of the Hikvsion’s devices. Here is the default password of Hikvision’s devices.

Username: admin

Password: 12345

IP address: 192.0.0.64/192.168.1.64

IP Tool: Download SADP Tool

For new models, you can reset the password via the SADP tool. Please click the link below and follow the instructions on the pdf file

CP Plus CCTV Default Password 

Username:  admin
Password:  admin
IP Address:  192.168.1.108 / 192.168.1.240

2. Dahua default IP address and password

Dahua default IP address is in the series of  192.168.1.XXX and if you need to change IP address then you need to follow the below link “How to change Dahua IP address“.

Username-admin

Password-admin

For DVR and NVR, following are the  default accounts:

  • admin/admin admin/123456 (master account of local and network accessing)
  • 888888/888888 (local administrator)
  • 666666/666666 (restricted user)
  • default / default (hidden user)

3. CP Plus IP camera default IP address

User name: admin
Password: admin
IP Address :  192.168.1.108 / 192.168.1.240

CP PLUS IP camera address finder tool

If cameras being used on 3rd party recorders or you need to configure a large number of cameras. The first step will be to use the Tools to find and configure the IP address and the local area network. Here is the link to the CP PLUS IP camera address finder tool.

 

4. Axis camera default IP

Axis camera User name: root
Password: pass
default IP: 192.168.0.90

5. Bosch camera default IP

For old models:
Username: service
Bosch IP camera default password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 8 seconds.

6. GEOVISION default password

Username: admin
Password: admin
IP Address: 192.168.1.108

7. TVT  IP camera default IP

DVR and NVR

Username: admin
Password: 123456
IP Address: 192.168.226.201

IP Camera

Username: admin
Password: 123456
IP Address: 192.168.226.201

8. Gobbler default IP address and password

Username: admin
Password: 123456

9. Panasonic default IP address and password

User name: admin
Password: 12345
IP Address:  192.168.0.253/10.1.1.12/192.168.0.10

10. SONY default IP address and password

Username: admin

Password: admin

IP Address: 192.168.0.100

11. Samsung default IP address and password and Samsung DVR default password

User name: admin
Password: 4321/111111/1111111
IP Address: 192.168.1.200

12. Ubiquiti default password

Username: ubnt
Password: ubnt
IP Address: 192.168.1.20

13. Mobotix camera default password.

Mobotix:
Username: admin
Password: meinsm

14. Messoa  default IP address and password

Username: admin
Password: 1234 or model number of camera or
IP address: 192.168.1.30

15. LTS Security default IP address and password

Username: admin
Password: 12345/123456
IP Address: 192.0.0.64

16. Speco default IP address and password

Speco
For old models:
Username: root /admin
Password: root/admin/1234

17. Canon default IP address and password

Username: root
Password: camera model number
IP Address: 192.168.100.1

17. Cisco default IP address and password

Username: No Username
Password: No Password
IP Address: 192.168.0.100

18. FLIR default IP address and password

 

Username: admin
Password: fliradmin
IP Address: 192.168.250.116

19. Foscam default IP address and password

Username: admin
Password: Blank
IP Address: search By IP tool, Click here to download

20. Honeywell default IP address and password

Username: administrator
Password: 1234
IP Address: DHCP enabled

Honeywell IP Utility is a free program that enables users to configure the IP network settings, name device(s), upgrade firmware and change passwords.

21. PELCO default IP address and password

Username: admin
Password: admin
IP Address: DHCP enabled

21. QVIS default IP address and password

Username: Admin
Password: 1234
IP Address: 192.168.0.250

22. SANYO default IP address and password

Username: admin
Password: admin
IP Address: 1192.168.0.2

23. Toshiba default IP address and password

Username: root
Password: ikwb
IP Address: 192.168.0.30

24.  3xLogic default IP address and password

Username: admin
Password: 12345
IP Address: 192.0.0.64

25.  Basler default IP address and password

Username: admin
Password: admin
IP Address: 92.168.100.x

26.  CNB default IP address and password

Username: root
Password: admin
IP Address: 192.168.123.100

27.  DIGISOL default IP address and Password

Username: admin
Password: 888888
IP Address: 192.168.1.10

28. Uniview default IP address and password

Username: admin
Password: 123456
IP Address: DHCP enable.

Uniview IP camera address finder tool

If cameras being used on 3rd party recorders. The first step will be to use the EZTools software on a PC to find the IP address of the cameras and then you change according to your local network. The second step will change the camera protocol to ONVIF. Here is the download link of EZ tool.

 

29. LILIN default IP address and password

Username: admin
Password: 1111
IP Address: 63.110.100.xxx/DHCP Enable

30. Trendnet default IP address and Password

Username: admin
Password: admin
IP Address: 192.168.10.1

I hope this information is helpful to you.  If you have any query, please write to us in the comment box below.

<p>The post Current CCTV default password List NEW first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/current-cctv-default-password-list-new/feed/ 19