camera setup – NVR IPCAMERA SECURITY https://www.nvripc.com CCTV Help Desk Blog! Thu, 23 Jan 2025 18:18:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.nvripc.com/wp-content/uploads/2024/04/cropped-icons8-camera-91-32x32.png camera setup – NVR IPCAMERA SECURITY https://www.nvripc.com 32 32 How to set up Arlo Cameras https://www.nvripc.com/how-to-set-up-arlo-cameras/ https://www.nvripc.com/how-to-set-up-arlo-cameras/#respond Thu, 23 Jan 2025 18:18:23 +0000 https://www.nvripc.com/?p=10173 How to set up Arlo Cameras, Control your Arlo smart home security system with one, easy-to-use app. Use the Arlo Secure App to protect your home, inside and out, with Arlo’s award-winning home security system, video doorbells, cameras, and floodlight. This article is for the Arlo Secure experience with Library. If you have the Arlo Secure […]

<p>The post How to set up Arlo Cameras first appeared on NVR IPCAMERA SECURITY.</p>

]]> How to set up Arlo Cameras, Control your Arlo smart home security system with one, easy-to-use app. Use the Arlo Secure App to protect your home, inside and out, with Arlo’s award-winning home security system, video doorbells, cameras, and floodlight.

This article is for the Arlo Secure experience with Library. If you have the Arlo Secure experience with Feed, visit: How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

For the best results use the Arlo Secure App for Arlo camera setup.

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras. To check compatibility, visit: Arlo SmartHub and Base Station Compatibility

An Arlo SmartHub or Base Station is optional for Arlo Pro 4 and Arlo Essential wire-free series cameras. For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

To set up your camera using a SmartHub or Base Station:

Note: Arlo Ultra, Ultra 2, and Pro 3 must be installed using an Arlo SmartHub or Base Station.

1.Launch the Arlo Secure App.
2.Scroll down to the bottom of the screen and tap Add New Device.
3.Tap Cameras.
4.Tap Ultra, Pro, or Essential.
5.Select your camera model.
6.Select an Arlo SmartHub or Arlo Base Station.

Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.

Plug the Ethernet Cable into your SmartHub or Base Station and tap Continue.

Plug the AC adapter into the wall outlet, make sure the lights on the Arlo SmartHub or Base Station turn on, and tap Continue.

If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

7.Insert the battery into the camera, and tap Continue.
8.Arlo will begin looking for your camera.

Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

9.Name your Arlo camera and tap Continue.
10.Position your Arlo camera and tap Continue.
11.Tap Finish.

To set up Arlo Pro 4 or Arlo Essential wire-free cameras directly to your Wi-Fi:

1.Launch the Arlo Secure App.
2.Scroll down to the bottom of the screen and tap Add New Device.
3.Tap Cameras.
4.Tap Pro or Essential.
5.Select your camera.
6.Select Connect without SmartHub, tap Continue.
7.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
8.Return to the Arlo Secure App and tap Continue.
9.Enter your Wi-Fi SSID (network name) and password,
10.Tap Continue.
11.For Arlo Essential Wire-Free cameras:
• Press and hold the Sync button on the bottom of the camera for two seconds.
13.For Arlo Pro 4:
• Insert the battery into the camera and tap Continue.
• When the LED on the front of the camera is blinking blue, tap Continue.
• If the LED is not blinking blue, tap LED is not blinking blue.
• Press and hold the Sync button on the inside of the camera and tap Continue.
• When the LED begins blinking blue, tap Continue.
14.Hold the QR code about four to six inches in front of your Arlo camera.
15.When you hear a chime, tap Continue. If you are having trouble, visit: My Arlo camera will not scan the QR code during setup
16.Arlo will begin looking for your camera.

Note: Make sure the camera is within 3 to 6 feet of your Wi-Fi router during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.

17.Name your Arlo camera and tap Continue.
18.Position your Arlo camera and tap Continue.
19.Tap Finish.

How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to:

VMC5040  VMC4040P  VMC4041P  VMC4050P  VMC4060P  VMC2020  VMC2030  VMC2032

This article is for the Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How to set up Arlo Cameras

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, Arlo Pro 5S, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

• For the best results use the Arlo Secure App for Arlo camera setup.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

• You may also join the Arlo Community where you can seek advice and solutions from experts and other Arlo customers.

Notes:

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras.

• To check compatibility, visit: Arlo SmartHub and Base Station Compatibility

An Arlo SmartHub or Base Station is optional for Arlo Pro 4, Pro 5S, and Arlo Essential Wire-Free series cameras.

• For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

Arlo SecureLink is a technology that uses the sub-GHz wireless communication to communicate between Arlo devices. The Arlo Security Keypad Sensor Hub uses Arlo SecureLink to talk with devices such as the Arlo All-in-One Sensor and the Arlo Pro 5S Camera.

• For more information, visit: How do I pair my Arlo Pro 5S to my Arlo Keypad Sensor Hub using Arlo SecureLink?

To set up an Arlo camera with an Arlo SmartHub or Base Station:

Note: Arlo Ultra, Arlo Ultra 2, and Arlo Pro 3 must use an Arlo SmartHub or Base Station.

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the camera is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Ultra, Pro, or Essential.
6.Select your camera.
7.Select an Arlo SmartHub or Arlo Base Station.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station turn on, and tap Continue.
If you have trouble connecting the SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?
8.Insert the battery into the camera, and tap Continue.
Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device.
Press the Sync button on the camera and tap Continue.
9.Name your Arlo camera and tap Continue.
10.Position your Arlo camera and tap Continue.
11.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up Arlo Pro 4, Arlo Pro 5S, or Arlo Essential wire-free camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.
2.Tap Devices.
3.Tap .
4.Tap Pro or Essential.
5.Select your camera.
6.Select Connect without SmartHub and tap Continue.
7.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
Note: Arlo Pro 5S cameras work with 2.4 GHz and 5 GHz frequency bands after installation is complete on 2.4 GHz. For more information, visit: How does the Arlo Pro 5S Camera use 5GHz Wi-Fi networks?
8.Return to the Arlo Secure App and tap Continue.
9.Enter your Wi-Fi SSID (Network Name) and Password.
10.Tap Continue.
11.For Arlo Essential wire-free cameras:
Press and hold the Sync button on the bottom of the camera for two seconds.
12.For Arlo Pro 4 and Arlo Pro 5S:
Insert the battery into the camera and tap Continue.
When the LED on the front of the camera is blinking blue, tap Continue.
If the LED is not blinking blue, tap LED is not blinking blue.
Press and hold the Sync button on the inside of the camera and tap Continue.
When the LED begins blinking blue, tap Continue.
13.Hold the QR code about four to six inches in front of your Arlo camera.
14.When you hear a chime, tap Continue.
Note: If you are having trouble, visit: My Arlo camera will not scan the QR code during setup
15.Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Wi-Fi router during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
16.Name your Arlo camera and tap Continue.
17.Position your Arlo camera and tap Continue.
18.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up other Arlo devices, visit:

For more information, visit:

To troubleshoot setup issues, visit:

How to set up the Arlo Pro and Pro 2 Camera – Arlo Secure 4.0

This article applies to:

VMC4030P  VMC4030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Pro and Pro 2 Camera

The following instructions apply to setting up the Arlo Pro or Arlo Pro 2 camera. To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To complete the Arlo Pro or Arlo Pro 2 setup process, you will need an Arlo SmartHub or Base Station. Install the Arlo SmartHub or Base Station first before installing your cameras. For more information, visit: How do I connect my Arlo SmartHub or Base Station to the Internet? – Arlo Secure 4.0

If you are setting up multiple cameras, only sync one camera at a time.

To set up an Arlo Pro or Pro 2 Camera:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Pro.
6.Tap Pro 2 or Pro.
7.Select an Arlo SmartHub or Arlo Base Station. If only one Arlo SmartHub or Base Station is installed, tap Continue when Arlo has detected the device.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?
8.Insert the battery into the camera, and tap Continue.
Unlock the battery compartment by pressing the latch button and pulling back gently.
Insert the battery as shown and close the battery door.
9.Press the Sync button on the camera for about two seconds and then release the button.
10.When the LED on the camera is blinking Blue, tap Continue.
11.Arlo will begin looking for your camera.
Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.
12.Name your Arlo camera and tap Continue.
13.Position your Arlo camera and tap Continue.
14.Tap Finish.
Note: Your camera will be added to the  Arm Away mode after installation. Motion Detection, Recording, Variable Length recording are enabled. For more information, visit: About Arlo Routines, Modes, Rules, and Automations

How to set up the Arlo Wire-Free Camera – Arlo Secure 4.0

This article applies to:

VMC3030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Wire-Free Camera

The following instructions apply to setting up the original Arlo Wire-Free Camera (VMC3030). To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

• Note: To complete the VMC3030 setup process, you will need an Arlo SmartHub or Arlo Base Station. If you are setting up multiple cameras, only sync one camera at a time.

To set up the Arlo Wire-Free Camera:

1.Launch the Arlo Secure App.
2.Tap Devices.
3.Tap .
4.Tap Cameras.
5.Tap Others.
6.Tap Arlo.
7.Select an Arlo SmartHub or Arlo Base Station or tap Continue if only one Arlo SmartHub or Arlo Base Station is installed.
Note: If an Arlo SmartHub or Arlo Base Station is not installed, tap Add New Base Station.
Plug the Ethernet Cable into your Arlo SmartHub or Arlo Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Arlo Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Arlo Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?
8.Insert the batteries into the camera:

Unlock the battery compartment by sliding and holding the latch.

Insert the batteries as shown and close the battery door.

9.Tap Continue.
10.Press the SYNC button on the camera for approximately two seconds and then release the button.

11.When the LED on the camera is blinking Blue, tap Continue.

12.Arlo will begin looking for your camera.
Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Arlo Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If your camera will not sync to the Arlo SmartHub or Arlo Base Station, visit: What to do when your Arlo camera will not sync to a SmartHub or Base Station during an install or setup
13.Name your Arlo camera and tap Continue.
14.Tap Finish.

How to set up the Arlo Essential Indoor Camera – Arlo Secure 4.0

This article applies to:

VMC2040

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Essential Indoor Camera

For best results, use the Arlo Secure App for Arlo Essential Indoor Camera setup.

An Arlo SmartHub or Base Station is optional.

• For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

• You may also join the Arlo Community where you can seek advice and solutions from experts and other Arlo customers.

To set up the Arlo Essential Indoor Camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Essential.
6.Tap Essential Indoor Camera.
7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.
8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.
9.Tap Continue.
10.Select Connect without SmartHub and tap Continue.
11.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
12.Return to the Arlo Secure App and tap Continue.
13.Enter your Wi-Fi SSID (network name) and Password.
14.Tap Continue.
15.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.
16.Once the Privacy Shield on the camera opens, tap Continue.
17.Press the Sync button on the camera.
18.When the LED on the front of the camera is flashing blue, tap Continue.
19.Hold the QR code about four to six inches in front of your Arlo camera.
When you hear a chime, tap Continue.
If you are having trouble, visit: My Arlo camera will not scan the QR code during setup
20.Arlo will begin looking for your camera.
After the camera is found, name your Arlo camera and tap Continue.
21.Position your Arlo camera and tap Continue.

To set up the Arlo Essential Indoor Camera with an Arlo SmartHub or Base Station:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Essential.
6.Tap Essential Indoor Camera.
7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.
8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.
9.Tap Continue.
10.Tap Continue to add your device to the Arlo SmartHub or Base Station.
11.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.
12.Once the Privacy Shield on the camera opens, tap Continue.
13.Press the Sync button on the camera.
14.When the LED on the front of the camera is flashing blue, tap Continue.
15.Follow the in-app instructions to complete the setup.

How do I set up my Arlo Go 2 Camera? – Arlo Secure 4.0

This article applies to:

VML2030

This article is for the  Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How do I set up my Arlo Go 2 Camera?

Arlo Go 2 gives you the flexibility of using 2.4 GHz Wi-Fi or LTE for connectivity. You can also use LTE as a backup in case your Wi-Fi internet connection is interrupted.

Note: When using both 2.4 GHz Wi-Fi and LTE mode, Wi-Fi will always be the primary mode of connection.

Arlo Go 2 works with the same Arlo Secure App as all other Arlo cameras and devices. However, to connect your Go 2 camera to the mobile network, an activated SIM card with a mobile data plan must be inserted into the camera.

Note: We recommend that you charge the battery before mounting your camera. Your camera LED indicator light will blink amber if your battery needs charging. The indoor charging cable that came with your camera works with most power adapters.

• For more information, visit: How do I insert the battery in my Arlo Go 2 camera?

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

• You may also join the Arlo Community where you can seek advice and solutions from experts and other Arlo customers.

To set up your Arlo Go 2 camera using LTE only:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Go 2.
6.Tap Continue.
7.Follow the instructions for installing your SIM card as shown on the Arlo Secure App and tap Continue.
For more information, visit: How do I install a SIM card in my Arlo Go 2 Camera?
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.
8.Tap Continue.
9.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup
10.Tap Continue.
11.Name your Arlo camera and tap Continue.
12.Position your Arlo camera and tap Continue.
13.Tap Finish.

To set up your Arlo Go 2 camera with Wi-Fi:

Note: Before setting up your Arlo Go 2, make sure that your mobile device is connected to a Wi-Fi network. For more information, visit: How do I connect my mobile device to a 2.4 GHz Wi-Fi network to set up my Arlo camera?

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Go 2.
6.Tap Set Up with Wi-Fi.
7.Follow the instructions for installing your SIM card as shown in the Arlo Secure App and tap Continue.
Note: You may skip this step if you are not using a SIM card.
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.
8.Tap Continue.
9.Verify your mobile device is connected to a 2.4 GHz Wi-Fi network and tap Continue.
10.Enter your Wi-Fi credentials, then tap Continue.
11.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup
12.Tap Continue.
13.Name your Arlo camera and tap Continue.
14.Position your Arlo camera and tap Continue.
15.Tap Finish.

If the Arlo Go 2 camera is installed too far from your Wi-Fi router, it may cause the battery to drain quicker. For more information, visit: How do I control whether my Go 2 Camera connects to Mobile or Wi-Fi?

<p>The post How to set up Arlo Cameras first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/how-to-set-up-arlo-cameras/feed/ 0 Qianniao Video Call Camera User Manual https://www.nvripc.com/qianniao-video-call-camera-user-manual/ https://www.nvripc.com/qianniao-video-call-camera-user-manual/#respond Mon, 06 Jan 2025 17:48:48 +0000 https://www.nvripc.com/?p=10079 Qianniao Video Call Camera User Manual, V360 pro is a special monitoring software for network cameras that can be broadcast and used. It can watch clear and smooth real-time pictures at any time after connecting smart cameras through mobile phones. It supports functions such as two-way voice, remote PTZ control, video playback, motion detection and […]

<p>The post Qianniao Video Call Camera User Manual first appeared on NVR IPCAMERA SECURITY.</p>

]]> Qianniao Video Call Camera User Manual, V360 pro is a special monitoring software for network cameras that can be broadcast and used. It can watch clear and smooth real-time pictures at any time after connecting smart cameras through mobile phones. It supports functions such as two-way voice, remote PTZ control, video playback, motion detection and alarm push. It is suitable for families, shops and companies, caring for the elderly, children and pets, supervising nannies and employees, and intelligent anti-theft.

Download and install the app

1.Quickly download and install by scanning the QR code
2.Search for “V360 Pro” in the mobile app store to download and install

Registration and login

1.New users need to register an account, click “Register Now” to enter the registration page
2.Select your country, enter your account name (phone number or email), and use the verification code to follow the prompts for registration
3.Existing accounts can be directly logged in by entering the account name and password

Qianniao Video Call Camera User Manual

Two methods of camera connection

When configuring Wi-Fi for the first time, please place the camera as close to the Wi-Fi router as possible, and then install it to the location that needs to be installed after the configuration is completed
3-1. Add a camera to the hot spot to connect the camera to the power supply. After the camera is started successfully, issue “Please use the mobile phone client software for wireless configuration” to open the mobile phone APP – click the “+” sign in the upper right corner – select “Add a hot spot”

1.Click the “+” in the upper right corner
2.Click “Add hotspot”
3.Check to confirm and click “Next”
4.Enter the Wi-Fi password and click “Next”
5.Click Switch Network to jump to the connection monitoring hotspot
6.Find the Wi-Fi at the beginning of HAP — XXXXXXX and click Connect
7.Return to APP and click Next after the connection is successful
8.Wait for the device to go online, and the page will jump after the connection is successful
9.Connect successfully, click to view

3-2. QR code addition

1.Open the V360 Pro APP and click the “+” sign in the upper right corner
2.Click “Smart Add”
3.Click Next
4.Enter the Wi-Fi password and click Next to generate the QR code
5.Place the QR code in front of the camera lens at a distance of approximately 10cm to 20cm. Hear the “Wi Fi recognition successful prompt tone”,Waiting for the phone to automatically redirect to the connection page
6.Wait for the device to go online, and the page will jump after the connection is successful
7.Connect successfully, click to view

Home page

.

Real time screen

Click on the homepage preview image to enter the real-time screen.

Sharing function

6-1 Share by entering an account (Enter the user’s registered mobile phone number or email account Share)

6-2 Share through face-to-face QR code scanning.

Recording function

Alarm record: Object movement detected after turning on motion detection will be recorded
Full time record: Full time recording
Plan record: The time period for recording can be set

Alarm function

Turn on the push switch and motion detection, and the camera alarm information can to send to your phone.

1.Movement detection: When surrounding objects move, an alarm will be triggered.
2.Human Shape Detection: When someone is detected, an alarm will be triggered.

Cloud Storage Playback

.

Video replay

.

Mobile Tracking

When surrounding objects move, the camera automatically rotates the lens to track and locate them

1.Click on camera settings – click on motion tracking

Screen settings

How long can the screen be reset without operation be set.

1.Click on Camera Settings – click on Screen Settings.
2.After selecting the screen rest time, click OK.

Video call function

Can make video calls with bound accounts.

1.When only the main account adds a device, make a call Both button 1 and call button 2 are call buttons, which can be pressed to Video call with the main account.
2.In the case where both the main account and the shared account are bound to the device, call button 1 corresponds to calling with the main account, and call button 2 corresponds to calling with the shared account.
3.After pressing the call button to call the user, if the app does not connect to the video call, pressing the call button again after 5 seconds will stop the call.

.

FAQs:

1. What if I can’t connect to the network?

If you use Wi-Fi,please make sure that the Wi-Fi password is correct. Do not plug in the network cable, and hear the video camera send out power-on music at the same time. After resetting with the reset pin,select Smart Add and follow the prompts. Note: It is the first choice to ensure that the camera is powered on,and to hear the warning sound of the camera when it is started normally. The camera needs to use the standard power supply,and the mobile phone power supply cannot guarantee the normal operation of the camera.

2. What is the problem with image jamming?

The camera needs a certain upload bandwidth to maintain a stable connection. It is recommended that the uplink bandwidth of the network where the camera is located be more than 2M,and the downlink bandwidth of the network where the mobile phone is located be more than 2M. If the camera is connected to Wi-Fi many people using Wi-Fi will also lead to image affected.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Search Terms:

Qianniao video call camera manual, Qianniao camera user manual, Qianniao camera setup guide, Qianniao camera instructions, Qianniao video camera manual, Qianniao webcam manual, Qianniao camera user guide, Qianniao camera quick start guide, Qianniao camera installation guide

Qianniao video call camera setup, how to set up Qianniao camera, how to connect Qianniao camera to computer, Qianniao camera driver download, Qianniao camera software download, Qianniao camera troubleshooting guide, Qianniao camera microphone setup, Qianniao camera video settings, Qianniao camera compatibility, Qianniao camera system requirements, Qianniao camera user manual PDF, Qianniao camera warranty information

video call camera, webcam, USB camera, computer camera, video conferencing camera, online meeting camera, live streaming camera, camera for video calls, camera for online classes, camera for remote work, camera setup, camera installation, driver installation, software installation, video quality, audio quality, microphone settings, camera settings, compatibility issues, troubleshooting, user manual, quick start guide, technical support, customer support, online help

“Qianniao video call camera not working”, “Qianniao camera microphone not working”, “Qianniao camera blurry image”, “Qianniao camera driver installation problems”, “how to update Qianniao camera drivers”, “Qianniao camera compatible with Windows 10/11”, “Qianniao camera compatible with Mac OS”, “Qianniao camera for Zoom/Skype/Microsoft Teams”, “Qianniao camera setup for beginners”, “Qianniao camera troubleshooting for video and audio issues”, “Qianniao camera user manual download PDF free”, “where to find Qianniao camera drivers”, “Qianniao camera warranty claim process”

Qianniao 1080p video call camera manual, Qianniao HD video call camera setup, Qianniao wide angle video call camera manual, Qianniao with microphone video call camera instructions, Qianniao with noise reduction video call camera setup

<p>The post Qianniao Video Call Camera User Manual first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/qianniao-video-call-camera-user-manual/feed/ 0