Arlo Ultra – NVR IPCAMERA SECURITY https://www.nvripc.com CCTV Help Desk Blog! Thu, 23 Jan 2025 18:18:23 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.nvripc.com/wp-content/uploads/2024/04/cropped-icons8-camera-91-32x32.png Arlo Ultra – NVR IPCAMERA SECURITY https://www.nvripc.com 32 32 How to set up Arlo Cameras https://www.nvripc.com/how-to-set-up-arlo-cameras/ https://www.nvripc.com/how-to-set-up-arlo-cameras/#respond Thu, 23 Jan 2025 18:18:23 +0000 https://www.nvripc.com/?p=10173 How to set up Arlo Cameras, Control your Arlo smart home security system with one, easy-to-use app. Use the Arlo Secure App to protect your home, inside and out, with Arlo’s award-winning home security system, video doorbells, cameras, and floodlight. This article is for the Arlo Secure experience with Library. If you have the Arlo Secure […]

<p>The post How to set up Arlo Cameras first appeared on NVR IPCAMERA SECURITY.</p>

]]> How to set up Arlo Cameras, Control your Arlo smart home security system with one, easy-to-use app. Use the Arlo Secure App to protect your home, inside and out, with Arlo’s award-winning home security system, video doorbells, cameras, and floodlight.

This article is for the Arlo Secure experience with Library. If you have the Arlo Secure experience with Feed, visit: How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

For the best results use the Arlo Secure App for Arlo camera setup.

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras. To check compatibility, visit: Arlo SmartHub and Base Station Compatibility

An Arlo SmartHub or Base Station is optional for Arlo Pro 4 and Arlo Essential wire-free series cameras. For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

To set up your camera using a SmartHub or Base Station:

Note: Arlo Ultra, Ultra 2, and Pro 3 must be installed using an Arlo SmartHub or Base Station.

1.Launch the Arlo Secure App.
2.Scroll down to the bottom of the screen and tap Add New Device.
3.Tap Cameras.
4.Tap Ultra, Pro, or Essential.
5.Select your camera model.
6.Select an Arlo SmartHub or Arlo Base Station.

Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.

Plug the Ethernet Cable into your SmartHub or Base Station and tap Continue.

Plug the AC adapter into the wall outlet, make sure the lights on the Arlo SmartHub or Base Station turn on, and tap Continue.

If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

7.Insert the battery into the camera, and tap Continue.
8.Arlo will begin looking for your camera.

Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

9.Name your Arlo camera and tap Continue.
10.Position your Arlo camera and tap Continue.
11.Tap Finish.

To set up Arlo Pro 4 or Arlo Essential wire-free cameras directly to your Wi-Fi:

1.Launch the Arlo Secure App.
2.Scroll down to the bottom of the screen and tap Add New Device.
3.Tap Cameras.
4.Tap Pro or Essential.
5.Select your camera.
6.Select Connect without SmartHub, tap Continue.
7.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
8.Return to the Arlo Secure App and tap Continue.
9.Enter your Wi-Fi SSID (network name) and password,
10.Tap Continue.
11.For Arlo Essential Wire-Free cameras:
• Press and hold the Sync button on the bottom of the camera for two seconds.
13.For Arlo Pro 4:
• Insert the battery into the camera and tap Continue.
• When the LED on the front of the camera is blinking blue, tap Continue.
• If the LED is not blinking blue, tap LED is not blinking blue.
• Press and hold the Sync button on the inside of the camera and tap Continue.
• When the LED begins blinking blue, tap Continue.
14.Hold the QR code about four to six inches in front of your Arlo camera.
15.When you hear a chime, tap Continue. If you are having trouble, visit: My Arlo camera will not scan the QR code during setup
16.Arlo will begin looking for your camera.

Note: Make sure the camera is within 3 to 6 feet of your Wi-Fi router during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.

17.Name your Arlo camera and tap Continue.
18.Position your Arlo camera and tap Continue.
19.Tap Finish.

How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to:

VMC5040  VMC4040P  VMC4041P  VMC4050P  VMC4060P  VMC2020  VMC2030  VMC2032

This article is for the Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How to set up Arlo Cameras

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, Arlo Pro 5S, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

• For the best results use the Arlo Secure App for Arlo camera setup.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

• You may also join the Arlo Community where you can seek advice and solutions from experts and other Arlo customers.

Notes:

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras.

• To check compatibility, visit: Arlo SmartHub and Base Station Compatibility

An Arlo SmartHub or Base Station is optional for Arlo Pro 4, Pro 5S, and Arlo Essential Wire-Free series cameras.

• For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

Arlo SecureLink is a technology that uses the sub-GHz wireless communication to communicate between Arlo devices. The Arlo Security Keypad Sensor Hub uses Arlo SecureLink to talk with devices such as the Arlo All-in-One Sensor and the Arlo Pro 5S Camera.

• For more information, visit: How do I pair my Arlo Pro 5S to my Arlo Keypad Sensor Hub using Arlo SecureLink?

To set up an Arlo camera with an Arlo SmartHub or Base Station:

Note: Arlo Ultra, Arlo Ultra 2, and Arlo Pro 3 must use an Arlo SmartHub or Base Station.

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the camera is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Ultra, Pro, or Essential.
6.Select your camera.
7.Select an Arlo SmartHub or Arlo Base Station.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station turn on, and tap Continue.
If you have trouble connecting the SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?
8.Insert the battery into the camera, and tap Continue.
Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device.
Press the Sync button on the camera and tap Continue.
9.Name your Arlo camera and tap Continue.
10.Position your Arlo camera and tap Continue.
11.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up Arlo Pro 4, Arlo Pro 5S, or Arlo Essential wire-free camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.
2.Tap Devices.
3.Tap .
4.Tap Pro or Essential.
5.Select your camera.
6.Select Connect without SmartHub and tap Continue.
7.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
Note: Arlo Pro 5S cameras work with 2.4 GHz and 5 GHz frequency bands after installation is complete on 2.4 GHz. For more information, visit: How does the Arlo Pro 5S Camera use 5GHz Wi-Fi networks?
8.Return to the Arlo Secure App and tap Continue.
9.Enter your Wi-Fi SSID (Network Name) and Password.
10.Tap Continue.
11.For Arlo Essential wire-free cameras:
Press and hold the Sync button on the bottom of the camera for two seconds.
12.For Arlo Pro 4 and Arlo Pro 5S:
Insert the battery into the camera and tap Continue.
When the LED on the front of the camera is blinking blue, tap Continue.
If the LED is not blinking blue, tap LED is not blinking blue.
Press and hold the Sync button on the inside of the camera and tap Continue.
When the LED begins blinking blue, tap Continue.
13.Hold the QR code about four to six inches in front of your Arlo camera.
14.When you hear a chime, tap Continue.
Note: If you are having trouble, visit: My Arlo camera will not scan the QR code during setup
15.Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Wi-Fi router during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
16.Name your Arlo camera and tap Continue.
17.Position your Arlo camera and tap Continue.
18.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up other Arlo devices, visit:

For more information, visit:

To troubleshoot setup issues, visit:

How to set up the Arlo Pro and Pro 2 Camera – Arlo Secure 4.0

This article applies to:

VMC4030P  VMC4030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Pro and Pro 2 Camera

The following instructions apply to setting up the Arlo Pro or Arlo Pro 2 camera. To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To complete the Arlo Pro or Arlo Pro 2 setup process, you will need an Arlo SmartHub or Base Station. Install the Arlo SmartHub or Base Station first before installing your cameras. For more information, visit: How do I connect my Arlo SmartHub or Base Station to the Internet? – Arlo Secure 4.0

If you are setting up multiple cameras, only sync one camera at a time.

To set up an Arlo Pro or Pro 2 Camera:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Pro.
6.Tap Pro 2 or Pro.
7.Select an Arlo SmartHub or Arlo Base Station. If only one Arlo SmartHub or Base Station is installed, tap Continue when Arlo has detected the device.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?
8.Insert the battery into the camera, and tap Continue.
Unlock the battery compartment by pressing the latch button and pulling back gently.
Insert the battery as shown and close the battery door.
9.Press the Sync button on the camera for about two seconds and then release the button.
10.When the LED on the camera is blinking Blue, tap Continue.
11.Arlo will begin looking for your camera.
Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.
12.Name your Arlo camera and tap Continue.
13.Position your Arlo camera and tap Continue.
14.Tap Finish.
Note: Your camera will be added to the  Arm Away mode after installation. Motion Detection, Recording, Variable Length recording are enabled. For more information, visit: About Arlo Routines, Modes, Rules, and Automations

How to set up the Arlo Wire-Free Camera – Arlo Secure 4.0

This article applies to:

VMC3030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Wire-Free Camera

The following instructions apply to setting up the original Arlo Wire-Free Camera (VMC3030). To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

• Note: To complete the VMC3030 setup process, you will need an Arlo SmartHub or Arlo Base Station. If you are setting up multiple cameras, only sync one camera at a time.

To set up the Arlo Wire-Free Camera:

1.Launch the Arlo Secure App.
2.Tap Devices.
3.Tap .
4.Tap Cameras.
5.Tap Others.
6.Tap Arlo.
7.Select an Arlo SmartHub or Arlo Base Station or tap Continue if only one Arlo SmartHub or Arlo Base Station is installed.
Note: If an Arlo SmartHub or Arlo Base Station is not installed, tap Add New Base Station.
Plug the Ethernet Cable into your Arlo SmartHub or Arlo Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Arlo Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Arlo Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?
8.Insert the batteries into the camera:

Unlock the battery compartment by sliding and holding the latch.

Insert the batteries as shown and close the battery door.

9.Tap Continue.
10.Press the SYNC button on the camera for approximately two seconds and then release the button.

11.When the LED on the camera is blinking Blue, tap Continue.

12.Arlo will begin looking for your camera.
Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Arlo Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If your camera will not sync to the Arlo SmartHub or Arlo Base Station, visit: What to do when your Arlo camera will not sync to a SmartHub or Base Station during an install or setup
13.Name your Arlo camera and tap Continue.
14.Tap Finish.

How to set up the Arlo Essential Indoor Camera – Arlo Secure 4.0

This article applies to:

VMC2040

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Essential Indoor Camera

For best results, use the Arlo Secure App for Arlo Essential Indoor Camera setup.

An Arlo SmartHub or Base Station is optional.

• For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

• You may also join the Arlo Community where you can seek advice and solutions from experts and other Arlo customers.

To set up the Arlo Essential Indoor Camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Essential.
6.Tap Essential Indoor Camera.
7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.
8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.
9.Tap Continue.
10.Select Connect without SmartHub and tap Continue.
11.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
12.Return to the Arlo Secure App and tap Continue.
13.Enter your Wi-Fi SSID (network name) and Password.
14.Tap Continue.
15.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.
16.Once the Privacy Shield on the camera opens, tap Continue.
17.Press the Sync button on the camera.
18.When the LED on the front of the camera is flashing blue, tap Continue.
19.Hold the QR code about four to six inches in front of your Arlo camera.
When you hear a chime, tap Continue.
If you are having trouble, visit: My Arlo camera will not scan the QR code during setup
20.Arlo will begin looking for your camera.
After the camera is found, name your Arlo camera and tap Continue.
21.Position your Arlo camera and tap Continue.

To set up the Arlo Essential Indoor Camera with an Arlo SmartHub or Base Station:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Essential.
6.Tap Essential Indoor Camera.
7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.
8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.
9.Tap Continue.
10.Tap Continue to add your device to the Arlo SmartHub or Base Station.
11.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.
12.Once the Privacy Shield on the camera opens, tap Continue.
13.Press the Sync button on the camera.
14.When the LED on the front of the camera is flashing blue, tap Continue.
15.Follow the in-app instructions to complete the setup.

How do I set up my Arlo Go 2 Camera? – Arlo Secure 4.0

This article applies to:

VML2030

This article is for the  Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How do I set up my Arlo Go 2 Camera?

Arlo Go 2 gives you the flexibility of using 2.4 GHz Wi-Fi or LTE for connectivity. You can also use LTE as a backup in case your Wi-Fi internet connection is interrupted.

Note: When using both 2.4 GHz Wi-Fi and LTE mode, Wi-Fi will always be the primary mode of connection.

Arlo Go 2 works with the same Arlo Secure App as all other Arlo cameras and devices. However, to connect your Go 2 camera to the mobile network, an activated SIM card with a mobile data plan must be inserted into the camera.

Note: We recommend that you charge the battery before mounting your camera. Your camera LED indicator light will blink amber if your battery needs charging. The indoor charging cable that came with your camera works with most power adapters.

• For more information, visit: How do I insert the battery in my Arlo Go 2 camera?

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

• You may also join the Arlo Community where you can seek advice and solutions from experts and other Arlo customers.

To set up your Arlo Go 2 camera using LTE only:

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Go 2.
6.Tap Continue.
7.Follow the instructions for installing your SIM card as shown on the Arlo Secure App and tap Continue.
For more information, visit: How do I install a SIM card in my Arlo Go 2 Camera?
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.
8.Tap Continue.
9.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup
10.Tap Continue.
11.Name your Arlo camera and tap Continue.
12.Position your Arlo camera and tap Continue.
13.Tap Finish.

To set up your Arlo Go 2 camera with Wi-Fi:

Note: Before setting up your Arlo Go 2, make sure that your mobile device is connected to a Wi-Fi network. For more information, visit: How do I connect my mobile device to a 2.4 GHz Wi-Fi network to set up my Arlo camera?

1.Launch the Arlo Secure App.
2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?
3.Tap .
4.Tap Cameras.
5.Tap Go 2.
6.Tap Set Up with Wi-Fi.
7.Follow the instructions for installing your SIM card as shown in the Arlo Secure App and tap Continue.
Note: You may skip this step if you are not using a SIM card.
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.
8.Tap Continue.
9.Verify your mobile device is connected to a 2.4 GHz Wi-Fi network and tap Continue.
10.Enter your Wi-Fi credentials, then tap Continue.
11.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup
12.Tap Continue.
13.Name your Arlo camera and tap Continue.
14.Position your Arlo camera and tap Continue.
15.Tap Finish.

If the Arlo Go 2 camera is installed too far from your Wi-Fi router, it may cause the battery to drain quicker. For more information, visit: How do I control whether my Go 2 Camera connects to Mobile or Wi-Fi?

<p>The post How to set up Arlo Cameras first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/how-to-set-up-arlo-cameras/feed/ 0 How do I install and mount my Arlo Solar Panel https://www.nvripc.com/how-do-i-install-and-mount-my-arlo-solar-panel/ https://www.nvripc.com/how-do-i-install-and-mount-my-arlo-solar-panel/#respond Sat, 15 Apr 2023 14:36:43 +0000 https://www.nvripc.com/?p=3856 How do I install and mount my Arlo Solar Panel? There are three Arlo Solar Panels designed to work with Arlo cameras. To know which Arlo Solar Panel is compatible with your camera, visit: Arlo Solar Panel Compatibility You can use Arlo Solar Panels in any outdoor location that falls within the solar panel’s operating temperature range […]

<p>The post How do I install and mount my Arlo Solar Panel first appeared on NVR IPCAMERA SECURITY.</p>

]]> How do I install and mount my Arlo Solar Panel?

There are three Arlo Solar Panels designed to work with Arlo cameras. To know which Arlo Solar Panel is compatible with your camera, visit: Arlo Solar Panel Compatibility

You can use Arlo Solar Panels in any outdoor location that falls within the solar panel’s operating temperature range of 32° to 113°F (0° to 45°C). For safety reasons, the Arlo Solar Panel cannot charge your camera battery at temperatures below freezing.

 

To set up your Arlo Solar Panel:

  1. Choose a good outdoor location for your Arlo Solar Panel, within 4.5 feet (1.3 meters) of your Arlo camera.
    The Arlo Solar Panel can absorb the most solar energy when it is in full sunlight for as much of the day as possible. You can mount the Arlo Solar Panel on your wall, fence, roof, gutter, or eaves. Make sure that you mount your Arlo Solar Panel facing true south (in the northern hemisphere) or true north (in the southern hemisphere).
  2. Secure the mount with the screws provided in the package.
  3. Attach your Arlo Solar Panel to the mount.
  4. Adjust the angle of the Arlo Solar Panel on the mount to the appropriate angle for your latitude.
                   
  5. Make sure that your Arlo camera battery is fully charged.
    Note: Your Arlo Solar Panel is designed to keep your camera battery charged, not to charge the battery from low to full.
  6. Connect the Arlo Solar Panel cable to your Arlo camera.

Warning: Do not unplug the cable from your Arlo Solar Panel. This can damage the cable and the Arlo Solar Panel.

Note: The charging icon will not immediately appear in the Arlo Secure app. If you want to confirm that your camera is charging, you can wait for the charging icon to appear, or you can check the camera’s battery percentage in the Arlo Secure app from day to day. For more information on battery charging icons, visit: What do my Arlo camera’s battery level icons and notifications mean?

How do I position the Arlo Solar Panel to get the most sunlight?

The amount of energy that the Arlo Solar Panel can produce depends on several factors: average sun exposure, weather conditions, tilt angle, and dust or debris. A solar panel in the same location might produce a different amount of energy at noon in December than at noon in June.

Similarly, the same panel might produce more energy in one geographic location and less in another. In both situations, the difference is based mainly on the amount of sunlight that the solar panel receives. To see a world map of average sun exposure, visit: http://globalsolaratlas.info/?m=sg:dni

To optimize the effectiveness of your solar panel, do the following:

  • Choose a location for your solar panel that gets plenty of sunlight; try to avoid spots that are in the shade for a significant portion of the day.
  • Mount your solar panel facing true south (in the northern hemisphere) or true north (in the southern hemisphere) and tilt it to the appropriate angle for your latitude.
  • Wipe the panel every few months to remove dust or debris that might affect the solar energy-harvesting efficiency of the panel.

For more information about the Arlo Solar Panel, see the following knowledge base articles:

To purchase the Arlo Solar Panel, visit: Arlo Accessories

How to troubleshoot Arlo Solar Panel charging issues

If the Arlo Solar Panel is not keeping your Arlo camera charged, follow the troubleshooting steps below.

Note: Charge your Arlo camera before using it with the Arlo Solar Panel. The Arlo Solar Panel is meant to keep your camera charged, not to charge it from low to full battery.

To troubleshoot issues with your Arlo Solar Panel:

  1. Check the solar icons in the Arlo Secure App to determine the charging state.If a solar panel is used, the following icons display: 
    Solar Icon Battery Icon(s) Meaning 
     

     

    		 Battery Fully Charged

    Note: It is possible that these icons will only display for a few minutes and then revert to gray.
     

     

    		   Battery Charging 
     

     

    		 Battery Not Charging  

    Note: If the battery is too cold or too hot, the battery will not charge.  
    No Icon    Battery or Charger Status Unavailable 

     

  2. Confirm the Arlo Solar Panel is compatible with your camera by visiting the following link: Arlo Solar Panel Compatibility.
  3. Unplug and reconnect the cable from your camera. Check the condition of the cable to confirm there are no exposed or damaged wires.
  4. Make sure that your solar panel is pointed toward the sun and is not obstructed by trees, buildings, or other obstacles.
    For more information, visit How do I position the Arlo Solar Panel to get the most sunlight?.
  5. Make sure that your Arlo camera is not in temperatures below freezing.
    For safety reasons, your Arlo camera battery cannot charge in temperatures below 32°F (0° C).
  6. Make sure that a battery is inserted into the Arlo camera that you are charging with the Arlo Solar Panel.
    The solar panel charges the battery, but it can’t power the camera if no battery is inserted.
  7. Make sure that your camera’s battery is fully charged when you connect the solar panel to your camera.
    The Arlo Solar Panel is designed to provide trickle charging to keep your camera battery charged, not to charge your camera battery from low to full.
  8. Reduce your camera usage for a day or two and note your camera’s battery level.
    Heavy usage of your camera can drain the camera battery faster than the solar panel can recharge it, especially with poor sun exposure.
  9. Clean the panel with a lightly damp cloth to remove dirt and debris from the surface.

Arlo Solar Panel Compatibility

With the Arlo Solar Panel connected to the camera and receiving average sun exposure, your camera battery stays charged, so you don’t need to worry about recharging it. The solar panel is a great low-maintenance solution for outdoor camera installations in hard-to-reach areas.

Although the Arlo Solar Panel is designed to keep your Arlo camera’s battery fully charged, heavy usage of your camera can drain the camera battery faster than the solar panel can recharge it. The 2-watt Arlo Solar Panel is designed to provide year-round trickle charging to keep your Arlo camera battery charged, not to charge your camera battery from low to full.

 

VMA5600 Solar Panel

The VMA5600 Solar Panel works with the following cameras:

  • Arlo Ultra 2
  • Arlo Ultra
  • Arlo Pro 5S
  • Arlo Pro 4
  • Arlo Pro 3
  • Arlo Go 2
  • Arlo Pro 3 Floodlight Camera

Note: The VMA5600 Solar Panel also works with the Arlo XL Housing and XL versions of these cameras.

For more information, visit: VMA5600 features and specifications

 

VMA4600 Solar Panel

The VMA4600 Solar Panel works with the following products:

  • Arlo Pro 2
  • Arlo Pro
  • Arlo Go
  • Arlo Security Light

For more information, visit: VMA4600 features and specifications

 

VMA3600 Solar Panel

The VMA3600 Solar Panel works with the following cameras:

  • Arlo Essential Camera
  • Arlo Essential Spotlight Camera
  • Arlo Essential XL Spotlight Camera

Video Guide

<p>The post How do I install and mount my Arlo Solar Panel first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/how-do-i-install-and-mount-my-arlo-solar-panel/feed/ 0