https://www.arlo.com/content/dam/arlo/support/microsite/Upgrade.mp4

What is Low Power Mode and how does it work with my Arlo cameras?

Lower Power Mode is a feature that allows your Arlo device to extend its battery life. Instead of video recording, your device will take snapshots when Low Power Mode is activated. When the camera enters Low Power Mode, you will receive a push notification about this status and the Feed will also have an event indicating when Low Power Mode is activated. Snapshots will be available in the Feed.

The NEW Arlo Secure App Smart Full Guide

The following Arlo devices have Low Power Mode capability:

What happens when Low Power Mode is enabled?

.

Activate Low Power Mode

Low Power Mode can be activated automatically, when your camera battery reaches a specific level, or can be activated manually in the Power Management settings. When activated automatically, Low Power Mode will turn off when the battery recharges to 10% above your set Low Power Mode Threshold.

To enable Automatic Low Power Mode:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap the Arlo device card.

4.Tap

5.Tap Power Management.

6.Tap the Auto Low Power Mode switch to turn the feature on.

7.Move the slider left or right to increase or decrease the Low Power Mode Threshold.

To manually enable Low Power Mode:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap the Arlo device card.

4.Tap

5.Tap Power Management.

6.Tap Low Power Mode.

7.Tap Confirm.
Note: When Low Power Mode is enabled manually, you will need to select a different Power Mode to return to normal video recording.

.

How do I change the Wi-Fi network that my Arlo device is connected to?

Most Arlo devices must be connected to a 2.4 GHz Wi-Fi network to operate. When you first set up your device, you are prompted to connect to a Wi-Fi network, but you can change this network after setup.

Before you start:

To change the Wi-Fi network that your Arlo device is connected to:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Select your Arlo device.

4.Tap

5.Tap Connected to or Wi-Fi Network.

6.Tap Change Network.

7.Go to your phone settings and make sure your mobile phone is connected to a 2.4 GHz Wi-Fi network.

8.Return to the Arlo Secure App.

9.Tap Continue to allow Arlo to find the same 2.4 GHz network your phone is connected to.

10.Enter your Wi-Fi SSID Network Name and Password.

11.Tap Continue.

12.Press the Sync button on your Arlo device.

13.When the LED on the front of the Arlo device is flashing, tap Continue.

14.Hold the QR code in front of your Arlo device and tap Continue when you hear a chime sound.
If the QR code will not scan, visit: My Arlo camera will not scan the QR code during setup

15.After Arlo discovers your device and a successful connection message is displayed, tap Finish.
If Arlo did not discover your device, visit: What to do when Arlo is unable to discover your device during an install or setup directly to a Wi-Fi router

.

How do I adjust the Video and Audio Settings on my Arlo Camera or Arlo Video Doorbell?

You can use the Arlo Secure App to adjust the Video or Audio Settings on your Arlo Camera or Arlo Video Doorbell.

Note: Available settings may vary by device. Video Settings include:

Audio Settings include:

To adjust Video or Audio Settings on your Arlo Camera or Arlo Video Doorbell:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap your device.

4.Tap

5.Tap Video Settings or Audio Settings.

.

How do I change my Arlo camera Power Management settings?

Arlo Wire-Free cameras allow you to choose Power Management settings to optimize battery life and video quality.

The following factors can reduce battery life:

To change Arlo camera Power Management settings:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Select a wire-free camera.

4.Tap

5.Tap Power Management.

6.Select Best Video, Optimized, Best Battery Life, or Low Power Mode:

For more information, visit:

.

How do I adjust Arlo video recording length?

.

Most Arlo cameras can record until activity stops, up to 5 minutes. If you set the camera to record until activity stops, the camera will record as long as it detects audio or motion (up to 5 minutes). If the event exceeds 5 minutes, a new recording will start. You can also set your Arlo cameras to record videos for a fixed length from 10 seconds to 2 minutes long. Recording requires either an Arlo Secure subscription or local storage.

For more information, visit:

To adjust Arlo video recording length:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Select the device you want to adjust.

4.Tap

5.Tap Default Mode Settings.

6.Under RECORDING LENGTH, select between Record until activity stops for recording length up to 5 minutes, or Record for a fixed length. Move the slider to adjust the recording length from 10 seconds to 2 minutes.

.

How do I remove a device from my Arlo account?

.

WARNING: Removing a device from your account erases all modes and settings on that device and resets the device to factory default settings. If you remove a device from your account and later add it back, you must complete the setup process just like you did when you set up your system for the first time.

To remove a device from your Arlo account:

1.Launch the Arlo Secure app or log in to my.arlo.com.

2.Tap or click Devices.

3.Select your Arlo device.

4.Tap or click

5.Tap or click the Arlo device name at the top of the Device Settings screen.

6.Tap or click Remove Device.
Note: If you remove an Arlo SmartHub or Base Station from your account, all the cameras synced to that Arlo SmartHub or Base Station are deleted from your account at the same time.

To remove all devices from your Arlo account and erase your recordings:

1.Launch the Arlo Secure app or log in to my.arlo.com.

2.Tapin the Arlo Secure App or click Settings on my.arlo.com.

3.Tap or click Privacy Center to open the Arlo Privacy Center.

4.Tap or click Content.

5.Tap or click Reset & Erase Arlo Devices.

6.Tap or click Reset & Erase All Devices at the bottom of the screen.

7.Select Reset & Erase All when the pop-up displays.

8.Follow the prompts to confirm that you want to erase and reset all Arlo devices.

Note: Privacy Center feature availability varies by region.

.

How to add an additional Arlo device to an existing Arlo system

To add a new Arlo device to your existing Arlo account:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap

4.Select the Arlo device you want to add.

5.Select the Arlo model.

6.Follow the in-app instructions to add the new Arlo device to your system.

.

What is Low Power Mode and how does it work with my Arlo cameras?

Lower Power Mode is a feature that allows your Arlo device to extend its battery life. Instead of video recording, your device will take snapshots when Low Power Mode is activated. When the camera enters Low Power Mode, you will receive a push notification about this status and the Feed will also have an event indicating when Low Power Mode is activated. Snapshots will be available in the Feed.

The following Arlo devices have Low Power Mode capability:

What happens when Low Power Mode is enabled?

Activate Low Power Mode

Low Power Mode can be activated automatically, when your camera battery reaches a specific level, or can be activated manually in the Power Management settings. When activated automatically, Low Power Mode will turn off when the battery recharges to 10% above your set Low Power Mode Threshold.

To enable Automatic Low Power Mode:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap the Arlo device card.

4.Tap

5.Tap Power Management.

6.Tap the Auto Low Power Mode switch to turn the feature on.

7.Move the slider left or right to increase or decrease the Low Power Mode Threshold.

To manually enable Low Power Mode:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap the Arlo device card.

4.Tap

5.Tap Power Management.

6.Tap Low Power Mode.

7.Tap Confirm.
Note: When Low Power Mode is enabled manually, you will need to select a different Power Mode to return to normal video recording.

.

.

<p>The post The NEW Arlo Secure App Smart Full Guide first appeared on NVR IPCAMERA SECURITY.</p>