Please plug DVR or NVR into the router with network cable if you wanna use a computer or phone to connect the recorder locally or remotely.

You can judge whether the recorder was connected to the internet by the status of a network like a picture below.

If the status is not connected, it means the recorder did not connect to the cloud successfully.

Here are the methods:

1. Please check the yellow and green light on the ethernet port of the recorder. One should be blinking which indicates the recorder has connected to the router successfully. If not, please change the ethernet port of the router or another reticle to have a try.

3. Go to the Main menu—-System—Network to confirm DHCP is ticked.

4. Please reset the recorder to the factory default setting.

5. If you can, please change the router to have a try.

Here is new CMS software:

for Mac:

http://www.sanncegroup.com/document/Computer%20software/General_VMS_Beta_Mac_En_V1.20.0.14_20191012.dmg

for windows computer:

https://download.annke.com/document/Computer_Software/General_Bate_CMS_V3.1.0.9.T.20190306.exe

Then you can follow the steps below to add NVR/DVR to your CMS.

1 Download CMS and install it on your computer according to the instruction in the download file.

2 Double click the icon  to open CMS, the default User Name is super, the password is blank (no password).

3 For the first time login, you will see the interface as below.

4 To add DVR/NVR, you can click the System menu on the bottom right corner. Then go to Device Manager, click ADD AREA to create a zone.

Name the zone yourself and click OK.

5 After adding an area, click the area name you created then click on to add your DVR/NVR.

Device Name: name it yourself

Login type: choose Cloud

Serial ID: Here is a method to find Serial ID

User Name/Password: default is admin and no password, same as your DVR

Click “ OK” after you have done the above parameters, you could double click to open this device.

6 After you add your DVR successfully, you can view and manage your DVR on CMS.

7 Here is the introduction to the CMS interface.

Note: If you have a problem adding DVR/NVR to CMS, please double-check the connection between

your DVR/NVR and the Internet and upgrade your CMS to the latest version.

<p>The post How to Connect DVR/NVR on Computer Software CMS? first appeared on NVR IPCAMERA SECURITY.</p>

Please place and use this product in the environment with temperature 0℃-50℃;
The device should be placed horizontally when it is being installed and used, avoid lean or
inversion;
Do not place or install it in the high temperature, wet, dusty and sooty places.
Keep the device away from water drop or plash. Don’t put any object with liquid inside like flower
vase or any other object on the device.
To ensure the normal heat dissipation of the device, there is a fan installed inside the device. The
device should be installed in well-ventilated environment;
The back of the NVR should be away from other devices or the wall above 6cm in order to
release heat;
If the device is used in the regions with much thunder, please install lightning protection device to
avoid host or hardware breakdown by lightning stroke.
2. Attentions
Do not touch the power switch and the NVR by wet hands or wet objects, in order to avoid
electric shock;
After installing the host, please make sure that the host and the chassis are connected to the
ground in order to avoid video and audio signal interference and damaged by static electricity;
Ensure the voltage stability of the power supply of the NVR. Use the power input with stable
voltage value and little wave interference rather than shutdown the NVR by disconnecting the
main switch directly;
Do not drop any liquid or metal on the NVR in case short circuit inside or fire;
The device does not include any hard disk, and you need to properly install the hard disk before
using it, otherwise, you cannot record and playback the video;
The dust on the mainboard will cause short circuit when it is damp. In order to ensure the
long-term normal working, you should regularly deduct the mainboard, connectors, chassis, fan
and so on by a brush;
Do not disconnect the power switch directly when you want to shutdown the NVR. You should
use the shutdown button on the panel in order to avoid damage to the hard disk;
The device system supports HDD format function. If the HDD has been used, please take note
that if it is with FAT 32 format. This NVR only supports HDD with FAT 32 format;
Do not open the device when it is connected with electricity;；
To ensure the integrity of the recording data, please replace the hard disk when it is damaged
(there is disk error record in the log information).
3. Note:
 The user manual is for reference only. The real object is the standard;
The products will be updated at any time. It is subject to update without notice.
Please contact our technical department for the latest programs and additional documentation.
If there is any doubt or dispute, our company reserves the right of final explanation.
This user manual offer references to multi-series products. The specific operation of each product will
not be listed one by one. Please contact our technical department when you have any question.

<p>The post AEEYE Smart NVR 2.0 installation guide first appeared on NVR IPCAMERA SECURITY.</p>