How to set FTP server in NVR?

HomeGuideHow To

How to set FTP server in NVR?

Answer: Note: Only certain models support this function. Please see the actual model for details. Note: Click Test to verify whether an FTP connecti

CCTV Super Password New Version All Brand
How to set the LED light of color-serial camera
Tapo Home Security Wi-Fi Camera Setup Guide

Answer:
Note: Only certain models support this function. Please see the actual model for details.
Note: Click Test to verify whether an connection can be established.


Note: If the remote directory is not specified, the system will create different folders directly by IP,
time and . You may also specify a remote directly, for example, FTPtest/xxx/xxx, then the
system will create the directory first and then create folders by IP, time and .


Note: If you select Event, Motion, or Loss, you also need to the
corresponding alarm-triggered snapshot. For example, if you select Motion, you need to
configure alarm-triggered snapshot (select Motion in the Edit Schedule window).


1. Click
System > > FTP.
2. Select the check box to enable FTP.
3. Enter the of the , username and , remote directory, and
upload interval.
4. Select the desired camera and then click right to
Upload Schedule. In the Upload
Schedule
window, select the desired image type and set time periods.


5. (Optional) Apply the same to other by clicking right to
Copy and then
selecting desired cameras.
6. Click
Apply to save the settings.

COMMENTS

WORDPRESS: 20
DMCA.com Protection Status