How to Connect Fiber Optic Cable to a CCTV Camera

HomeGuideHow To

How to Connect Fiber Optic Cable to a CCTV Camera

The security and surveillance sector is centuries old; however, before the advent of technology, closed circuit television units, and so on, places we

Topsee IPCAM NVR Firmware DL
How to use AVSS – PC Mac Client
Last Dahua Firmware 2022
The and sector is centuries old; however, before the advent of technology, closed circuit television units, and so on, places were guarded manually, mostly with some basic arms. While security guards are still there and have their own significance, installing a  video system kit adds a lot of value. Whether in an industrial unit, campus, or a gated community, installing a proper system is crucial considering the situation today, and this it globally applicable. Nowadays, surveillance systems have become complex and may be connected to a mesh with an cable. With fiber optics gaining momentum, legacy networks are either replaced or blended with this new and evolving technology.  In fiber optic or blended networks, you can opt for a fiber optic cable for CCTV connectivity with the network. This post discusses some pointers on using fiber optic cable for CCTV applications and more.

Pointers on CCTV Camera with Fiber Optic Cable

In a general copper cable network which has a CCTV camera connected to it, the camera signals are converted from analog to digital and then again to analog during display. It is a bit different when it comes to fiber optic or blended networks. Here are some pointers on how to connect CCTV camera with fiber optic cables in a blended network.
  • In a blended network, the analog signals from the camera are converted to light or signals which are transmitted over a fiber optic cable.
  • You require a which converts these signals again to analog for a normal display of video footages or even live transmissions. Digital video optical converters do this job.
  • Ensure the is compatible with the other network devices and the camera. Also, make sure the converter has a simple plug-and-play design which makes both and use easy.
  • Using a fiber optic cable for transmission is beneficial as it eliminates issues such as EMI and other environmental disruptions. Also, it supports long geographical distances.
  • All you need here is a fiber optic cable and connector along with digital converter.
  • You simply need to place the cable between the display or computer and the CCTV camera. Usually, a multimode, double stranded cable would be good.
  • Ensure there are no splices in the camera and display links.
  • Use the right connector for both ends of the cable to connect it and ensure to leave enough space for other network devices if any.
  • Place the transmitter at the camera end of the cable and a receiver at the computer or display end. Ensure the transmitters and receivers are enclosed and protected. Power both of these through available power supplies or  Switches.
  • Connect the transmitter to the camera with any normal and the receiver with the computer display in the same way. Make sure the transmitter gets the and switch it on.
  • Now, check if this network is working and if the footage collected by the camera can be displayed on the screen with the required clarity.
  • Do note that this is a simple version of such connectivity. As most networks are now complex, more cabling and devices may be required based on the network design.

What is a Digital Video Optical Converter?

While you know most devices such as cables, transmitters and receivers, it is important to know the role of digital video converters in a CCTV network. Basically, these are optical transmitters and receivers for fiber optic and blended networks which offer a great video quality over a single fiber optic cable. They also the overall operating status apart from signal conversion. For this purpose, they come with LED indicators to issue and messages to the system as required. These are compatible with most types and brands of , and can be used as standalone devices or as a part of an entire network. Primarily, this device, at the transmission end, converts the analog camera signals to optical ones and transmits them over a fiber optic cable toward the display or computer. The converter at the receiver end reverses these optical signals to analog for video display.

If you plan to expand your network and also a security system in your office or industrial campus, you need to source the right network devices from a reliable manufacturer and supplier.  Aside from a fiber optic cable for CCTV , you would require a fiber media converter, digital video optical converters, switches, connectors, and so on. VERSITRON is a well-established manufacturer and supplier of all such network devices aside from CCTV converter installation kits. which are compatible with copper as well as fiber networks.

COMMENTS

WORDPRESS: 15
DMCA.com Protection Status