We’ll even dive into the VicoHome interface and address common issues you may encounter along the way.

How To Connect VicoHome Camera To Wifi?

1. Before connecting to VicoHome, please make sure to download the VicoHome app, then create an account and sign in.

2. To turn on the VicoHome camera, press and hold the power button for 3 seconds. You’ll hear a voice prompt when the camera starts up.

3. Tap on Add camera now or the + icon in the top right corner to link the VicoHome camera. Then, click on I heard the sound or saw the light on followed by Next Step.

AP mode connection

4. The VicoHome APP will search for nearby VicoHome cameras. Click on the camera that’s detected. If the camera isn’t found, make sure your camera is turned on and emitting the “Ding dong ding dong” sound.

💡 The VicoHome camera emits a “Ding dong ding dong” sound when it’s in waiting-for-connection mode. If your camera isn’t making this sound, press the power button twice to put it into connection waiting mode. (Sometimes, if you double-click the power button too quickly, it may not respond, so you might need to try a few times.)

💡 If your VicoHome camera is turned on and making the “Ding dong ding dong” sound, but the APP can’t find it, then your camera may not support AP mode. In this case, please use the QR code mode connection.

5. Confirm your Wi-Fi name and enter your password. Click Next step. Please note that the VicoHome camera only supports 2.4GHz Wi-Fi, double-check your Wi-Fi and password, then click Confirm.

6. Click Join, and then wait for the VicoHome camera to connect to Wi-Fi, which takes about 1-2 minutes.

If you clicked Cancel, it will switch to the QR code connection mode. You can use the QR code connection or exit and start over.

7. After successfully connecting the VicoHome camera, set a name for it and then click Next Step. The VicoHome app will test the Wi-Fi signal at the camera’s current location. If the signal appears weak, it’s recommended to enhance the Wi-Fi signal or change the location.

.

See also  Cameras using VicoHome (Buyer’s Guide)

.

Choose the camera’s operating mode. You can change it at any time or click Skip.

8. If it’s your first time using the VicoHome camera, VicoHome offers a one-month free subscription. You can choose to claim it or close the offer. Now you’re all set to start using your VicoHome camera.

QR code connection

4. If you’re connecting the VicoHome camera for the first time, you’ll hear a “Ding dong ding dong” sound. Tap on I heard a beeping sound.

💡 The VicoHome camera emits a “Ding dong ding dong” sound when it’s in waiting-for-connection mode. If your camera isn’t making this sound, press the power button twice to put it into connection waiting mode. (Sometimes, if you double-click the power button too quickly, it may not respond, so you might need to try a few times.)

5. Choose Connect via Wi-Fi (the VicoHome camera only supports Wi-Fi connection), then confirm your Wi-Fi name and enter the password. Click Next Step. Please note that the VicoHome camera only supports 2.4GHz Wi-Fi. Double-check your Wi-Fi and password, then click Confirm.

.

6. Display the shown QR code to the VicoHome camera for scanning, keeping a distance of 6-12 inches. The camera will emit a voice prompt when it successfully scans the QR code. Wait for the camera to connect to your Wi-Fi, which takes approximately 1-2 minutes. After successfully connecting, the app will automatically proceed to the next step.

💡 (If the camera fails to connect to Wi-Fi after 3 minutes, please refer to the VicoHome troubleshooting guide.)

7. After successfully connecting the VicoHome camera, set a name for it and then click Next Step. The VicoHome app will test the Wi-Fi signal at the camera’s current location. If the signal appears weak, it’s recommended to enhance the Wi-Fi signal or change the location.

Choose the camera’s operating mode. You can change it at any time or click Skip.

8. If it’s your first time using the VicoHome camera, VicoHome offers a one-month free subscription. You can choose to claim it or close the offer. Now you’re all set to start using your VicoHome camera.

How to install a VicoHome camera?

Share VicoHome Camera

Sharing a camera allows multiple people to use the VicoHome Camera at the same time.

1. Click on the “Share ” icon and a QR code will appear in the Device sharing options. Save this QR code and share it with your family or friends.

2. Invitees need to download the VicoHome App and sign in, then open the + in the top right corner, select Add Friend’s Device and scan the shared QR code to add the camera.

Motion detection settings

VicoHome cameras are enabled by default for motion detection and alarm notifications. If you need to change the settings, you can do so in the Motion Detection and Notification Setting screen.

In Motion Detection, you can adjust the detection sensitivity and recording time.

If you subscribe to the VicoHome Premium service, there are intelligent settings for Person, PetVehicle and Package.

View alarm notifications

Click on the Library or “” icons to view alarm messages and click on a message to view a video. VicoHome cameras offer free cloud storage and recorded videos will be deleted after 7 days. If you have an important video, you can click “Download” to save it to your phone.

Local recording settings

To use local recording, you need to insert a memory card, which will only display SD Card Video when inserted.

VicoHome cameras only support alarm recording, you cannot set up continuous recording. The recording settings are in Motion Detection.

Click on SD Card Video to view the video stored on the memory card. The grey colour indicates that video time is available. If you have just inserted a memory card, you will need to wait until motion is detected before you can view the video.

Night vision settings

You can set the night vision function in Lighting Setting to improve the camera’s performance in dark environments.

（White light mode is only available for VicoHome cameras that support white light or colour night vision.）

Activity Zone settings

All videos will still be recorded after setting activity zones, but you will only receive notification of movements in your activity zone（This feature requires a subscription）

The principle of Activity Zone is to judge the objects activity in pointed area with combining intellegent analyse on cloud.
Therefore it’s a cloud-based AI.

View multiple VicoHome cameras at the same time

By clicking on the ‘‘ icon, you can watch multiple VicoHome cameras at the same time.

How To Reset VicoHome camera?

When you want to sell your VicoHome camera or if the camera is faulty, you can try resetting your VicoHome camera. Resetting the camera will return it to factory settings and you will need to reconnect the VicoHome camera.

Press the power button twice to reset the VicoHome camera. (Sometimes, if you double-click the power button too quickly, it may not respond, so you might need to try a few times.)

.

VicoHome for PC – Using VicoHome on your computer

.

VicoHome is a security camera app that allows you to monitor your home or office from your smartphone. But did you know that you can also use VicoHome on your PC? Using VicoHome on your computer can give you a bigger screen and a more convenient way to monitor your security cameras. In this article we will show you how to use VicoHome on your PC.

Although VicoHome does not come with computer software, you can download the app to your computer using an Android emulator, such as Bluestacks. Once you have installed the emulator, you can download the VicoHome app from the Google Play store or by using the VicoHome APK file. With VicoHome on your PC, you can view your security cameras on a larger screen and access all the features of the app with ease.

Whether you want to keep an eye on your home when you’re away or monitor your office when you’re at work, VicoHome can help. By using VicoHome on your PC, you can make monitoring your security cameras even more convenient. So let’s get started and learn how to use VicoHome on your computer.

System Requirements

If you want to use VicoHome on your PC, you need to make sure your computer meets the following system requirements:

If your computer meets these requirements, you can proceed to download and install VicoHome on your PC using an Android emulator like Bluestacks or LDPlayer.

Please note that the performance of VicoHome on your PC will depend on the specifications of your computer. If your computer does not meet the minimum system requirements, you may experience lag or other performance issues while using the app.

Downloading and Installing VicoHome on PC

If you want to use VicoHome on your PC, you need to download and install an Android emulator first. There are several Android emulators available, but we recommend using Bluestacks or MemuPlay. Here are the steps to download and install VicoHome on your PC:

Method 1: Using Bluestacks

Method 2: Using MemuPlay

.

After installing VicoHome on your PC, you can use it to monitor your home security cameras, view live feeds, and receive alerts for any suspicious activity. With VicoHome, you can keep your home and family safe and secure, even when you’re away.

Using VicoHome on PC

If you want to use VicoHome on your PC, you can do so by following these steps:

Navigating the Interface

Once you have installed VicoHome on your PC, you will be able to navigate the interface using your mouse or keyboard. The interface is user-friendly, and you can easily access all the features and functions of the app.

Controlling Devices

You can control all your VicoHome devices from your PC. You can view live video feeds, turn on/off devices, and adjust settings. To control devices, simply click on the device you want to control and select the action you want to perform.

.

<p>The post How To Setup VicoHome Camera first appeared on NVR IPCAMERA SECURITY.</p>

Meanwhile you will received the instant push message via “ANRAN” alarm system once the motion detected, so you can do accordingly for the safety protection measures.Your family and enterprise be with you, wherever you are.The main function:
1. Real video playing
2. Playback image checking
3. Time & message reminding
4. Share the video image

Login Anran

1.Open the APP to sign up an account. Go to the login interface, and click “Sign Up”.

2.Sign up with your email address, and click “Next”.

3.Set up an “Nickname” and “Password” for your APP, click “Done” to complete.

Connect Anran Camera

The Anran camera has two connection modes, it is recommended to use the QR code mode to connect the camera.

QR Code Mode

1. Please start the Anran camera before you connect it.

For battery-powered cameras, the user should press and hold the power button to activate the device. In the case of a smart doorbell, it is necessary to remove the insulating tab on the battery to begin the startup process. For other cameras, connection to a power source is required.

2. Open the Anran APP, register and log in.
Then click on ‘Add Device’ or ‘+’ to connect your camera, select your Anran camera and click on Next.

（All the cameras from every year have the same connection method, so you can freely choose any camera.）

3. If you are using the Anran camera for the first time, you do not need to reset it, you can see the flashing red light, just click Next.

If the red light is not flashing, please reset the Anran camera.

4. Make sure your wifi is 2.4GHz, if not, connect to 2.4GHz wifi and enter your wifi password, click Next.

.

See also  ANRAN Camera Common Problems and How to Troubleshoot Them

How To SetUp Anran Camera

Make sure your wifi name and password are correct. Anran cameras only support 2.4GHz wifi.

5. Please remove all film from the lens. Tap Next to show a QR code, and let your device scan the code. Keep your phone 5-8 inches from the lens.

After the camera recognize the QR code, it will sound“ bugu” , tap “next”.

6. Now wait for the Anran camera to connect to your wifi and access the internet, usually around 60 seconds for a successful connection.

7. After successful connection, the app will show you the installation guide and wifi signal test, you can simply click Skip.

AP Network Mode

When the Anran camera does not scan the QR code, you can try to connect to the camera using the AP network mode

1. Click on the icon in the top right corner to switch to ‘AP Network’ mode, then click on Next.

2. Make sure your wifi is 2.4GHz, if not, connect to 2.4GHz wifi and enter your wifi password, click Next.

Make sure your wifi name and password are correct. Anran cameras only support 2.4GHz wifi.

3. Click on the ‘Connect’a button, then go to the phone settings to connect to the [STRN_XXXXXX] camera wifi, and return to the Anran APP after connecting.

4. Now wait for the Anran camera to connect to your wifi and access the internet, usually around 60 seconds for a successful connection.

5. After successful connection, the app will show you the installation guide and wifi signal test, you can simply click Skip.

Processing Steps of Anran Camera and Wi-Fi connection failure

1.Please make sure you are using 2.4GHz Wi-Fi. In our experience, most users fail to connect the WI-Fl because of selecting 5GHz Wi-Fi and
adding the camera incorrectly.

2.Make sure you use the correct Wi-Fi password and a fast Wi-Fi network.(Note: It requires that the Wi-Fi password doesn’t have special characters such as (/l!@#$))

3.Make sure the QR code on the phone screen is normal and the distance between the phone and the camera lens is 10-15cm (3.9-5.9inch) during the scanning process.

4.If none of the above steps take effect, please try to re-download the APP, restore the product to factory settings, restart the router, and then add it again.

5.After multiple attempts have failed, please contact customer service

.

Install Anran camera

Please test that the Anran camera is working before attaching it to the wall.

Select Height and location

Hang the Anran camera 7-10 ft above the ground. This height maximizes the detection range of the motion sensor of the camera. Avoid placing the camera under direct sunlight.

Tips for the installation of solar panel

1.When installing in the northern hemisphere, face the panel to the south, and when installing in the southern hemisphere, face the panel to the north.

2.Take care to install the solar panel so that the sun is not blocked by any items such as eaves, trees branches, etc.

Share Anran Camera

You can share Anran camera to your family, while multiple people use the camera. Your family members need Anran account to share.

Enter the camera settings interface, click Device Share > Add > Select sharing mode.

Scan OR Code

Open your family’s APP, show your family’s QR-Code. and scan it. Share the camera with your family.

Enter account

Please enter the other party’s account

Setup Motion Detection

The Anran camera motion detection is activated by default, you can set it in detail in Alarm Management.
You can set the detection sensitivity, the detection time and also the detection area to reduce false alarms.

· Motion Detection: The Anran camera detects if there is a moving object in the frame

· Noise Detection: The Anran camera detects any unusual sounds in the surroundings

Audio warning and strobe light

Activate the Audio warning and strobe light function, which allows the camera to sound an alarm or flash a light when an object is detected to scare off intruders.

.

See also  ANRAN Camera Common Problems and How to Troubleshoot Them

.

(Only Anran cameras with colour night vision and white light sources support strobe light)

View alarm messages

In Alarm Messages you can see all alarm messages, and if you have a memory card inserted, click on the green play icon to view the alarm video.

Setup Recording

You will need to insert a memory card to record, Anran supports memory cards from 4-128GB.
After inserting the card you can see the memory space in Recording Management and select the recording mode, All Day Recording or Event Recording.

Setup Night vision mode

For Anran cameras that support colour night vision, you can set the night vision mode in Image Settings > Night vision mode

Common problems

Why is the Anran camera still in the list of devices after resetting?

The reset function only resets the network configuration of the camera, but does not affect the configuration on the App. Therefore, to remove the camera from the list of devices, it must be deleted within the App.

How can I switch my Anran camera to another router network?

First, remove and reset the Anran camera on Anran App, and then configure the camera again using the App to connect to the new router network.

Why is the Anran camera not identifying the inserted SD card?

It is recommended to insert the SD card after power has been cut to the camera. Additionally, please confirm that the SD card is functioning properly and formatted in FAT32. In some cases, the camera may not recognize the TF card if the internet connection is poor.

Why am I not receiving notifications on my mobile phone App for the Anran camera?

Please ensure that the App is running on your phone and that the relevant notification settings have been enabled. Additionally, make sure that message notifications and relevant permissions have been enabled in your mobile phone system settings.

ANRAN Camera Common Problems and How to Troubleshoot Them

As an ANRAN camera owner, I understand the frustration that comes with encountering camera problems. ANRAN cameras are designed to provide high-quality surveillance footage, but like any other electronic device, they can experience issues that affect their performance. In this article, I will be discussing some common problems that ANRAN camera owners face and how to troubleshoot them.

Whether you’re experiencing connectivity issues, blurry footage, or camera malfunctions, it’s important to know how to resolve these problems quickly and efficiently. Troubleshooting your ANRAN camera can save you time and money, and it can also help you get the most out of your surveillance system.

By following the steps outlined in this article, you’ll be able to identify and fix common ANRAN camera problems. Whether you’re a business owner looking to protect your property or a homeowner looking to secure your home, these troubleshooting tips will help you get your ANRAN camera up and running smoothly.

Why can’t ANRAN cameras scan QR codes?

You can try the following 5 steps to fix ANRAN cameras not scanning QR codes, if that still doesn’t solve the problem, you can try connecting the camera using AP network mode.

1.Remove any protective film from the lens of the ANRAN camera.

2.Ensure there are no obstructions between the ANRAN camera lens and your phone’s screen.

3.Verify that the QR code is clearly visible on your screen (you may need to increase your phone’s brightness).

4.Position the ANRAN camera lens directly over the QR code, maintaining a distance of 5-8 inches.

5.Adjust the angle of your phone or the ANRAN camera until you hear a tone indicating successful scanning.

Why ANRAN Camera not connecting to wifi?

There could be several reasons why your NIAN camera is not connecting to wifi.

1.Confirm that the WIFI account and password are accurate for your ANRAN camera setup.

2.Keep in mind that most cameras, including the ANRAN camera, typically support only 2.4GHz WiFi networks.

3.When installing a ANRAN camera, ensure that the network functions properly. For optimal results, it is advisable to operate close to the router.

4.If the QR code method for network configuration fails, consider manually configuring the network. Avoid overly complicated passwords and refrain from using special characters like \ or ‘.

5.Reset your ANRAN camera to attempt reconnection if necessary.

6.If the ANRAN camera still fails to connect to the internet after trying both methods, consider restarting your router and trying once more.

Why is my ANRAN Camera offline?

One of the most common issues that ANRAN camera users face is the camera going offline. This can be frustrating, especially if you rely on your camera for security purposes.

1.Verify the power supply status of the ANRAN camera: If the camera has a battery, ensure it is not low on charge. If the camera uses wired power, confirm that it is not powered off.

2.Examine the ANRAN camera’s indicator status: If the red light blinks, reconfigure the network. If the blue light blinks, ensure the router is connected to the internet. If the indicator is off, verify that the ANRAN camera is powered on. If the camera is not powered on, restore factory settings.

Frequent disconnections may occur if the ANRAN camera’s current installation location has weak network signal reception. Adjust the camera’s position if necessary.

3.Inspect your mobile network: If the ANRAN camera status indicator is blue, the camera is functioning well. Test the mobile network, turn off any active VPNs, and retry connecting the camera.

Can you use ANRAN Camera without cloud?

Yes, you can use ANRAN camera without cloud. ANRAN cameras come with a built-in SD card slot that allows you to store footage locally. This means that you can use the camera without having to pay for cloud storage.

<p>The post How To SetUp Anran Camera first appeared on NVR IPCAMERA SECURITY.</p>

About This Manual

Thank you for using My MobileKey app. This manual shows you how to use the Akuvox My Mobile Key for hands-free door opening. The manual is written based on My MobileKey version: 1.0.6.

About My Mobile Key

The Akuvox My Mobile Key allows you to open doors hands-free through Bluetooth or by taping unlock icon on the app. The App can be paired up with selected Akuvox A03 control units and more through authentication, and communicate with the control units for the Bluetooth-based hands-free door opening. You can either wave your hand in front of the control units or simply tap the unlock icon on the app to open the door.

Getting Started

Before your start, you will need to have the following items:

Getting Your Initial Configuration Ready

After you download the app, you need to enable the smartphone’s Bluetooth feature for pairing up the app with the control unit, and set up your permissions to allow the app to run in the background for the door opening, etc.

To enable Bluetooth:

1.In the bottom taskbar, tap Setting.

2.Tap Permissions > Bluetooth Setting to enable the Bluetooth feature on your smartphone.

To enable and set up the Run in Background feature:

Pairing Your App with Access Control Unit

To pair My MobileKey with the control unit via Bluetooth, you need to scan and pair up your app with the device near you using the authentication code. After that, you will be ready for the Bluetooth-based door-opening experience.

To pair the app with the control unit:

Note

Note

1.In the bottom taskbar, Tap Home.

2.Tap Search to search the control unit nearby. A pop-up window for entering the authentication code will be displayed.

3.Enter the authentication code obtained from your administrator. The device model number will appear on the screen if you pass the authentication.

4.If you want to add more control units, tap + Adding New Device, then repeat the above pairing process.

Opening Door With My MobileKey

After the pairing up, you can open the door hands-free.

To open the door:

• Tap Open Door  or wave your hands near the control unit to open the door. A pop-up prompt will be displayed for the door opening success.

Note

.

Checking Your Access Log

You can check your access history on your smartphone. You can get to know when and on

which control unit the access attempts are made (both for success and failure).

To check your access history:

• At the bottom taskbar, tap Access Logs. The access history will be displayed.

Updating Your App

You can check your app version and update it if needed.

To check and update your app:

1.On the bottom taskbar, tap.

2.Tap About, then tap Check for Update. it will turn to App Store or Google Play automatically, then you can check whether it is the latest one.

Getting Help

If you need help, go to Setting> Help to watch the video tutorials.

Privacy Policy

To learn the terms and conditions for using Akuvox My MobileKey, and the privacy policies related to data collecting, go to Setting > Private Policy.

.

Akuvox ACRM Tool Configuration Guide

This manual guides you in using the software ACRM, the configuration tool of Akuvox desktop card reader ACR-CID01, and the physical access card Bkey. It is based on the software version V1.0.0.6.

Product Overview

The ACR-CID01 is an efficient and multifunctional desktop card reader and encoder, designed specifically for modern access control systems. It supports connection to a computer via a USB to quickly read information on RFID/Bkey access cards.

Before You Start

Make sure:

Login

You can log in with either the Admin account or the Super Manager account.

Bkey Upgrade

To upgrade Bkey with the ACRM tool, please contact Akuvox tech support.

ACR-CID01 Setup Overview

The ACR-CID01 setup interface consists of four modules.

Basic Setup

Check the Device’s Information

You can see the device’s serial number and the firmware version on the Device Info interface.

Switch Language

You can change the tool language to English or Simplified Chinese.

1.Click  in the upper right corner.

2.Select the desired language and click OK.

3.After confirmation, click Cancel to close the System Settings window, and the tool language is changed.

Change Password

You can change the tool login password.

1.Click  in the upper right corner and click Password.

2.Enter the current password and set the new password.

Upgrade the Device

You can upgrade the ACR-CID01 to the latest version.

Reset the Device to Factory Settings

You can reset the settings to factory default.

Set the Buzzer

You can enable/disable the buzzer when swiping cards.

Enable or disable the buzzer on the Device Info interface. It is enabled by default.

Card Display Mode Selection

You can select the IC/ID/Bkey card display mode on the Card Display Mode interface. The default is 8HN.

Card Writing

Mifare Classic, Mifare Plus, and Desfire cards are encryption-featured cards.

Mifare Classic

Concepts

Mifare Plus

Concepts

The Mifare Plus cards support one pre-personalized level and three security levels(SL), operating at a single security level at any given time and can only be switched to a higher level.

Desfire

Concepts

Create App

Create File

Modify Key

You can modify the App Key of specific keys. Then, assign different keys to personnel with different permissions to set cards.

Modify CID

Card Reading

The ACR-CID01 supports reading unencrypted IC cards, Mifare Classic, Mifare Plus, and Desfire cards. Before reading cards, make sure you select the right IC card type.

Note

Unencrypted Cards

Mifare Classic

Mifare Plus

Desfire

.

<p>The post Akuvox My MobileKey User Guide first appeared on NVR IPCAMERA SECURITY.</p>

Ubell APP Download

Ubell supports Android and iPhone, you can download it from google play or app store.

Register account and login

You need to register for an Ubell account to connect to the camera, register and login to Ubell

Connect Ubell Camera

Charging

Please charge Ubell camera about 10-12 hours by plugging it into a power source using the provided USB cable. After connecting the camera with App, the App will indicate the battery status.

Turn on Ubell camera

Turn on the Ubell camera switch and wait for the camera to start (about 30 seconds)

ADD Ubell Camera

Please connect your phone to the 2.4Ghz wifi firstly before you pair the Ubell camera, make sure your router password in mind before you start the pairing process.

1. Click “Add a device” and then choose “Setup device”, click “Yes”, when you hear the following voice “ The camera is now ready to begin pairing”.

2. Input the CORRECT WiFi password of your router, if you input a wrong password you will not be able to connect it successfully. Click the eye icon to double confirm the password you entered correct

3. Enter into the “search device” page, make sure to turn up you phone’s volume to the Maximum, you will hear the following voice: “Pairing Information Received”.

.

See also  UBell Camera Troubleshooting and FAQ

.

4. You have connected the device to the App successfully.

Now you can setup a password to log in, which could protect your privacy. The camera password should be more than 8 characters in length including numbers and letters.

5. Congratulations! Now you can live view the Ubell camera on your phone anytime and anywhere.

Share Ubell Camera

1. After you finish the connection with the App, click and choose “Share QR code” .

2. Other users need to download the App first, and then scan the below QR code.

Note:
1.Your camera password can be seen by the invited users, but they can not modify it.
2.The invited users can change all the camera settings, so the camera will work as per the last change made on the settings among all users.
3.If your camera does not work as you set before, please check the settings from the invited users’ device.

Push Mode

Cloud storage

You can play back all cloud videos here. Cloud video length is 8 seconds defaulted and 20 free video clips per day. The oldest footages will be overwritten by the newest one day by day.

Micro sd card Video playback

Please find the orange color for the video event and use two fingers to zoom out the timeline and then put the line to the head of the orange color and wait for the playback

Ubell App interface description

1. click ,you could live viewing videos.

Important:

Please keep the Cloud Storage turned on to ensure the camera’s time kept synchronized with your phone’s time.

SD Card Setting

1. Please turn on the cloud storage so that you can sync the camera time with your phone.
2. Please format the micro sd card before you installed it.The camera doesn’t support plug and play.So please make sure to power off the camera and then install your card.

.

See also  UBell Camera Troubleshooting and FAQ

.

Orientation Setting

You can choose Normal Rotate,Mirror or Mirror and rotate depends on your hardware installation way. The default is Normal.

Environment Setting

You can choose to set it as Normal, back light compensation, night IR, High light compensation or Dynamic according to your actual light environment of installation place.

PIR Detection Setting

You can set the PIR sensitivity as Disabled,Low,Medium and High.

1. When you set the PIR as Disabled, you will not record and receive any motion triggered events.

2. It is recommended to set the PIR Detection to High so that you could capture as more as a motion triggered from the beginning part of the event.

3. Try to capture more the beginning of the triggered event, please adjust your camera angle a bit closer to your aimed spot.

Dormancy Time Setting

1. This is the time you could set for the video length recorded to micro sd card.

2. Not dormant: If you choose this option, you will not allow the camera enter into standby mode, the camera will keep recording all the time until battery drains out. ( 60 seconds per file)

LED Lamp Setting

When you choose Enable, the Blue LED will light up to indicate when you operate the camera as it should be.When you choose Disabled, the Blue LED will not light up to indicate the operations or trigger motions.It is recommended to set it as the default

Power frequency Setting

Please choose 60 or 50HZ according to your local frequency, It’s defaulted to 60HZ for united states users.

.

See also  UBell Camera Troubleshooting and FAQ

.

Ubell Camera Name and Password

You can set a desired name for your camera and set the password to protect your camera’s privacy.

Click “Check for update” to update the app to the newest version.
The newest version app will fix some bugs of the software we encountered.

Save video

Videos can be saved in Cloud Storage

The videos of PIR activity
You could save 20 videos of PIR activities per day in cloud storage, which can be saved for 7 days and then will be overwritten.

Videos can be saved in the SD card

1. The videos of PIR activity
2. The videos of live viewing You could playback these videos on the timeline in the App and format the SD card in the App.

Videos can be saved on the mobile phone album

1. The videos of REC mode
2. The screenshot You need to delete the videos of REC mode and the screenshots from your phone’s album.

Common Problem

Why do I fail to connect the Ubell camera to the App by sound wave?

1. Please reset the camera by the pin included.
2. Please make sure the camera is powered on and there will be voice prompts that indicates it.
3. Make sure the distance between your mobile phone and the device is no more than 30cm. And your mobile, camera and router are in the same room.
4. Adjust your phone volume to maximum.
5. Double check your WiFi password and make sure it is correct.

When In-App setup is done, why I could not see the live streams on my mobile?

First, check in App to confirm the wifi signal is strong enough. If not,we would suggest adding wifi extender in between.

Why I cannot receive any alarm after I finished connecting the camera with the Ubell App ?

1. Click the ’Set icon‘in App to confirm you have chose ”Notification” under the ”Push mode”.
2. Check your mobile settings to allow the notification.

.

UBell Camera Troubleshooting and FAQ

How to fix can not connect to the UBell camera?

You can fix the problem of not being able to connect to the UBell camera by following these six steps.

How to fix UBell cameras sending a lot of motion alerts?

Most UBell cameras are PIR detected, you can try these 3 steps to fix the problem.

<p>The post How To Set Up Ubell Camera first appeared on NVR IPCAMERA SECURITY.</p>

1. Downloading our Mobile App

You can go to the Apple App Store or Google Play Store, search for ‘CloudEdge, and download the app for free.

2. Register an Account and Log in

Launch the app and tap Sign up now to register a user account with your email ID. You can also choose to log in with your other accounts like Facebook, WeChat, or Apple ID.

3. Add new doorbells

3.1 Power on the doorbell

Switch on the doorbell and make sure the LED indicator flashes red (once per second). If not. Please press and hold the Reset Button for 5 seconds to restore the factory default.

3.2 Make sure your phone is connecting to a 2.4GHz Wi-Fi.

The doorbell does not support 5GHz Wi-Fi frequency. Please connect your phone to a 2.4GHz Wi-Fi and operate the setup close to your router.

3.3 Charge your doorbell.

The battery inside the doorbell is not fully charged in accordance with transportation safety regulations. Prior to the doorbell installation, please charge your doorbell for about 8-10 hours. The charging LED turns BLUE from RED.

3.4 Add new doorbell

3.4.1 Adding device by QR code (default)

Tap ‘Add device’ or the ‘+’ icon, and select the doorbell. Set up Wi-Fi for your smart doorbell. by following the in-app instructions.

3.4.2 Add device by AP network (Alternative)

Tap ‘Add device’ or the ‘+’ icon > select doorbell > tap on the QR codes icon select AP network.

→ Press and hold the Reset Button for 5 seconds to reset the doorbell – connect to a 2.4GHz Wi-Fiand input the Wi-Fi password – tap ‘connect’ to go to the smartphone WLAN setting, and search for doorbell AP network(STRN_xxxxxx) to connect to.

→ go back to CloudEdge app doorbell connecting to the selected Wi-Fi> connection completes → Device adding succeeds.

CloudEdge Mobile PC App User Guide

4. Homepage

4.1 Homepage introduction

1. Family management: enter the family management page, where you can edit family names, add or delete rooms, and add family members to share the device with.

2. If you have added many cameras, tap here to live to view four channels at a time.

3. Tap to add a new device.

4. Select a room to view the devices that have been added to the room.

5. List view/grid view, device management, room management.

6. Display/hide preview.

7. Tap to live view. (see to 4.2 live view)

8. Playback footage on SD card/Cloud

9. Device name (S/N number in default)

10. Tap to go to doorbell quick settings;

11. Homepage

12. Message

13. Me: Tap to go to account setting

4.2 Liveview

4.3 Playback

Calendar:

It helps you to search for video recordings by date. The date numbers marked in black indicate that there were event recordings that day. The grey date numbers indicate days without data.

Alert Event

It helps you understand the type of event alert for the day!

4.4 Cloud storage

Activate cloud storage and back up your event recordings to the cloud.

A 7-day free trial is available for each new device.

Note:

Only the administrator got access to cloud storage. Other users who share the device can only view local footage on the SD card.

The free trial will be deactivated after seven days. Tap [Change Plan], and you can subscribe to your cloud storage plan for your device.

5. Settings

5.1 Go to the setting page

Path 1:Homepage → setting

Path 2: Homepage → Live view/ Playback → Setting icon

5.2 Setting menu

Device information:

Receive Alert Notification: you can switch off the button to mute notifications.

Installation guide: helps you diagnose your wifi signal.

Device share: Tap here to share your device with other family members.

Location management: Edit device location for Smart Home Automation settings.

Time Settings: Enable/disable the 12-hour Clock.

Image setting:
Anti-flicker setting: 50Hz / 60Hz;
Night vision setting: Automatic / ff / On

Sound setting:

Chime setting: Pair it with an indoor wireless chime.

Voice message: Record up to 3 voice messages (max. 10 sec per message) to respond quickly to your visitors.

Alarm management: Set motion Detection and Tamper Alarm.

Battery management: check battery status.

Recording management: check recording mode and Micro SD card status.

Cloud Storage Service: subscribe to a cloud storage plan.

Checking for a New Version: checking for new firmware updates.

Restart Device: Tap to restart doorbell.

Delete the Device: Tap here to delete the doorbell and restore the factory default.

6. Messages

It is the message center that collects all your alert messages, history sharing, system messages, and customer service messages.

6.1 Alarm Messages

All the alarm messages will be listed on this page and is valid for seven days. Alarm messages will be deleted after expiration, whether read or not.

6.2 Sharing History

Device-sharing history will be listed on this page

6.3 System Messages

System messages, including firmware update notices and low battery alerts, will be listed on this page.

6.4 Feedback & Customer Service Messages

Customer service messages will be listed on this page.

7. Me

Here is the account setting page.

7.1 Family management

You can edit your home name, add members, and create or join a family user group.

7.2 Shared

You can share your family user group and devices on this page.

7.3 Help & feedback

You can get online customer service and feedback in this page

7.4 Quick Guide

Here are quick user guides on how to add our cameras to the CloudEdge app.

7.5 Account Settings

In this page, you can mute the alert sound, doorbell call ringtone, check the App version, clear the cache and deactivate the account

8. Mobile Notifications

8.1 Manage App Permission

To be able to receive visitor notifications and event alerts properly on your phone, it is important to allow all notifications and permissions. You can check it from your phone settings regarding app permissions and notifications.

8.2 Notifications on visitor calls.

Tap on the pop-up notification to answer your visitors

8.3 Motion detection alert

Tap on the pop-up notification to check motion detection events.

8.4 Tamper alarm

Enable the tamper alarm, and you will receive a tamper alert once the doorbell is taken apart from the mounting bracket.

CloudEdge For PC

CloudEdge does not support computer software, but you can use CloudEdge camera through third-party software.

Install CloudEdge app on computer

Now windows11 system or M1 chip MAC can install mobile app, you can directly install CloudEdge app.

Third party software

If your camera supports ONVIF, you can use ispy or vlc software to watch live video.

You need to open the camera’s ONVIF settings and set the ONVIF password first.

Note: Low-power cameras with batteries do not support ONVIF function

How to connect CloudEdge devices using Bluetooth

1)On the Homepage, tap “Add” or “+” in the upper right corner, and tap “Add Device.”

2) If the Bluetooth of the cellphone doesn’t turn on, the app will show a pop-up, so please allow it to turn on Bluetooth.

.

.

3)After Bluetooth turns on, the app will automatically search for devices that are on and not bound. Select the device you want to connect to in the search list.

.

.

4)Select the 2.4GHz Wi-Fi that you want the camera to connect to and enter the password. When the Bluetooth is on, the app will automatically show you the 2.4GHz Wi-Fi that could be connected. 5GHz Wi-Fi will not be shown. Normally, the Wi-Fi name and password of your 2.4GHz and 5GHz Wi-Fi are the same or similar. If you can’t find your Wi-Fi, please contact your router provider to check the 2.4GHz Wi-Fi setting of your router.

.

.

5)The app will automatically go to the page where the Wi-Fi connection is in progress. A sound will be heard. Wait for the connection to be successful and the camera indicator light to change to steady blue. Click “Next” to edit the camera name and choose a family. Click “Done” to finish the setup.

.

.

6)If you failed to connect, check the reason and resolution shown on the app. Long press the reset button until you hear a “cuckoo” sound to reset the camera and start again, or try the other methods below.

APP Function Experience

What should I do if the app crashes?

Click cloudedge APP to crash or crash while in use, uninstall and

reinstall.

Login problem

1.Please check if the cellular network is normal.

2.Indicates whether the appropriate country code should be selected.

3.Whether the account and password were entered correctly.

4.Uninstall and reinstall.

Registration problem

1.Please indicate your phone model and your system version.2.Download an app for other systems. If you

are currently using an iPhone, can you successfully register with an Android phone in the same network

environment?

3.Are you able to register successfully when trying to switch to a different WiFi network?

Account registration failed?

1.Please select the correct country when registering an account.

2.When the account is registered, the cellular network is normal.

3.Determine the network and location permissions of the open app.

What should I do if the APP cannot load the video and shows that the camera is not connected?

Make sure that the app in the phone settings first checks that the camera’s power and network are normal. If this is normal, turn off the camera and restart it. If the connection is still lost after the restart, remove the camera in the APP, do a factory reset and add the device again.

What should I do if the APP asks that the device cannot be accessed?

Please reset the device to factory settings and add it again. If this problem persists, please contact customer service in a timely manner for technical assistance.

What can I do if the app frequently fails to load the video and shows an interruption?

Correct the problem according to the status of the camera’s indicator lamp:

1.If the indicator light is off, it means that the device is not receiving power. Carefully check the power supply and whether the power supply interface is normal. It is recommended that you change the power supply and give it a try.

2.Die Kontrollleuchte leuchtet, es gibt zwei Situationen:

A: The indicator lamp will glow red to indicate that the camera’s network has been disconnected. Check the stability of the WIFI network and restart the router. It is recommended to move the camera closer to the router.

B: The indicator lamp will glow blue, indicating that the camera’s network is normal. Check if the cellphone network is normal. If the cellular network is not smooth, the video stream may not be transmitted to the cellphone It is recommended that the cellphone switch WIFI to try.

Why is there a circle in the center when viewing a video screen that freezes and delays?

The circle means the video is loading and the freeze delay means the network is not working smoothly. Check that the network connected between the camera and the mobile phone is working properly. It is recommended that the camera be located near the wireless router.

How do friends access the camera?

When friends need access to the camera, they need to share the camera with friends. Friends download the app on their cell phone and register a new account. Information on the specific operating method for sharing the camera can be found in the operating video under “Device sharing” in the APP.

<p>The post CloudEdge Mobile PC App User Guide first appeared on NVR IPCAMERA SECURITY.</p>

Download and install the app

1.Quickly download and install by scanning the QR code

https://www.cloudbirds.cn/download/app/cloudbirds

2.Search for “V360 Pro” in the mobile app store to download and install

Registration and login

Qianniao Video Call Camera User Manual

Two methods of camera connection

When configuring Wi-Fi for the first time, please place the camera as close to the Wi-Fi router as possible, and then install it to the location that needs to be installed after the configuration is completed
3-1. Add a camera to the hot spot to connect the camera to the power supply. After the camera is started successfully, issue “Please use the mobile phone client software for wireless configuration” to open the mobile phone APP – click the “+” sign in the upper right corner – select “Add a hot spot”

1.Click the “+” in the upper right corner

2.Click “Add hotspot”

3.Check to confirm and click “Next”

4.Enter the Wi-Fi password and click “Next”

5.Click Switch Network to jump to the connection monitoring hotspot

6.Find the Wi-Fi at the beginning of HAP — XXXXXXX and click Connect

7.Return to APP and click Next after the connection is successful

8.Wait for the device to go online, and the page will jump after the connection is successful

9.Connect successfully, click to view

3-2. QR code addition

1.Open the V360 Pro APP and click the “+” sign in the upper right corner

2.Click “Smart Add”

3.Click Next

4.Enter the Wi-Fi password and click Next to generate the QR code

5.Place the QR code in front of the camera lens at a distance of approximately 10cm to 20cm. Hear the “Wi Fi recognition successful prompt tone”,Waiting for the phone to automatically redirect to the connection page

6.Wait for the device to go online, and the page will jump after the connection is successful

7.Connect successfully, click to view

Home page

.

Real time screen

Click on the homepage preview image to enter the real-time screen.

Sharing function

6-1 Share by entering an account (Enter the user’s registered mobile phone number or email account Share)

6-2 Share through face-to-face QR code scanning.

Recording function

Alarm record: Object movement detected after turning on motion detection will be recorded
Full time record: Full time recording
Plan record: The time period for recording can be set

Alarm function

Turn on the push switch and motion detection, and the camera alarm information can to send to your phone.

Cloud Storage Playback

.

Video replay

.

Mobile Tracking

When surrounding objects move, the camera automatically rotates the lens to track and locate them

Screen settings

How long can the screen be reset without operation be set.

Video call function

Can make video calls with bound accounts.

.

FAQs:

1. What if I can’t connect to the network?

If you use Wi-Fi,please make sure that the Wi-Fi password is correct. Do not plug in the network cable, and hear the video camera send out power-on music at the same time. After resetting with the reset pin,select Smart Add and follow the prompts. Note: It is the first choice to ensure that the camera is powered on,and to hear the warning sound of the camera when it is started normally. The camera needs to use the standard power supply,and the mobile phone power supply cannot guarantee the normal operation of the camera.

2. What is the problem with image jamming?

The camera needs a certain upload bandwidth to maintain a stable connection. It is recommended that the uplink bandwidth of the network where the camera is located be more than 2M,and the downlink bandwidth of the network where the mobile phone is located be more than 2M. If the camera is connected to Wi-Fi many people using Wi-Fi will also lead to image affected.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Search Terms:

Qianniao video call camera manual, Qianniao camera user manual, Qianniao camera setup guide, Qianniao camera instructions, Qianniao video camera manual, Qianniao webcam manual, Qianniao camera user guide, Qianniao camera quick start guide, Qianniao camera installation guide

Qianniao video call camera setup, how to set up Qianniao camera, how to connect Qianniao camera to computer, Qianniao camera driver download, Qianniao camera software download, Qianniao camera troubleshooting guide, Qianniao camera microphone setup, Qianniao camera video settings, Qianniao camera compatibility, Qianniao camera system requirements, Qianniao camera user manual PDF, Qianniao camera warranty information

video call camera, webcam, USB camera, computer camera, video conferencing camera, online meeting camera, live streaming camera, camera for video calls, camera for online classes, camera for remote work, camera setup, camera installation, driver installation, software installation, video quality, audio quality, microphone settings, camera settings, compatibility issues, troubleshooting, user manual, quick start guide, technical support, customer support, online help

“Qianniao video call camera not working”, “Qianniao camera microphone not working”, “Qianniao camera blurry image”, “Qianniao camera driver installation problems”, “how to update Qianniao camera drivers”, “Qianniao camera compatible with Windows 10/11”, “Qianniao camera compatible with Mac OS”, “Qianniao camera for Zoom/Skype/Microsoft Teams”, “Qianniao camera setup for beginners”, “Qianniao camera troubleshooting for video and audio issues”, “Qianniao camera user manual download PDF free”, “where to find Qianniao camera drivers”, “Qianniao camera warranty claim process”

Qianniao 1080p video call camera manual, Qianniao HD video call camera setup, Qianniao wide angle video call camera manual, Qianniao with microphone video call camera instructions, Qianniao with noise reduction video call camera setup

<p>The post Qianniao Video Call Camera User Manual first appeared on NVR IPCAMERA SECURITY.</p>

P6SLite camera use precautions

Download P6SLite APP

Download and install “P6Slite” from IOS app store or Android app store or scan the QR code below to get APP information.

Users can register and log in via email (please use real email to retrieve password later).

Note: Please be sure to use your account to log in the APP, otherwise some camera functions may not work properly.

Turn on the P6SLite Camera

Plug the power into the power of the camera and wait a few seconds for the P6SLite camera to automatically turn on.

Voice prompt at power-on ”The system is starting up, please wait”. If there is no voice reminder, please restore the factory settings and try again.

Note: Do not twist the head of the camera to force it to rotate after turning it on. If you need to adjust the monitoring orientation, you can adjust it through the PT function of the mobile APP.

Connect P6SLite Camera To Wifi

Open the P6SLite APP, click “+” in the upper right corner of the home page, select “Add Wi-Fi Device”, click “Next” to add WiFi camera.

Method 1：add camera by scan QR Code

1. Select “Please use the scan code distribution network to connect the router”.

2. Choose your wireless network and enter the password, click “Next”.

3. Please face the QR code on the camera lens and keep it at distance of about 15 cm, then if you hear”WiFi connection, please wait” click “Next”.

4. Wait for the P6Slite camera to connect to WIFI

If the camera is successfully connected to WIFI, you will hear “WiFi is connecting, please wait ….network connection successful” and see the camera in the device list.

Method 2：add camera by AP Hotspot

1. Select “Please use the AP hotspot distribution network”.

2. Click the button to jump to the WiFi setting page (Android system not have this page, please skip this step).

3. Select the camera’s AP hotspot, it’s an AP hotspot beginning with “ZWAP_NG…”, enter password: 01234567 to connect AP hotspot (If you do not find the AP hotspot, please try to reset the camera)

4. Return to APP, select your wireless network in the available wireless list to connect. (WiFi signal strength must be greater than 3 cells).

5. Enter your WiFi password, click “Confirm”.

6. Wait for the camera to connect to WiFi.

Share P6SLite Camera

Open the P6SLite APP, click the ‘···’ button on the top right corner of the PT AI camera device preview on the homepage, and select ‘Sharing management’ to enter the sharing settings and invite others to watch. The person being shared needs to download the P6SLite APP, register an account and log in to view.

View in Real Time

Open the P6SLite APP, click the connected camera on the home page, and you can browse in real time. Through the camera’s control interface, you can adjust the camera’s sharpness, horizontal and vertical angles, as well as screen capture and recording, and remote calls operation, etc.

Video Playback

The P6SLite camera can only use the historical video playback function after installing a MicroSD memory card. After the MicroSD memory card is installed and turned on, the camera will automatically start recording video.

In the camera control interface, click the button ‘Playback’ to enter the historical video playback interface. You can drag the timeline to select the time period to be played back, or you can use the button ‘Date’ to select historical videos on different dates.

Alarm and AI Human Tracking

Click “Arm/Disarm” to open or closed the alarm push (image send to mailbox + mobile phone), at the same time you must set the correct alarm parameters, such as open email and push notification in “Humanoid Tracking”.

Turn on the humanoid tracking. when human beings appear on the screen, the camera can detect human figures, you can open the Humanoid Tracking, or select the required trigger actions, such as SD Card Snapshot, SD Card Record, Push Notification, Alarm Sound, etc., you can set up ‘Armed all day’ or ‘Custom arming’, you can set Sensitivity, Detection area, etc.

Camera Setting

Open the P6SLite APP, enter the ‘Settings’ function page of the camera on the homepage, here you can configure all camera settings.

Reset P6SLite camera

Insert the reset pin into the reset hole and press for 5 seconds to restore the factory settings. (When connecting or reconfiguring the P6SLite camera for the first time, make sure that the camera is in the factory reset state).

FAQ

Why does the P6SLite camera prompt a password error?

The camera password may has been changed, please press the “Reset” button of the camera for 5 seconds. the camera voice prompts “Reset successful”, then follow the steps above to re-add the camera.

Why is the P6SLite camera offline?

Please check wireless network that camera is connected can connect to the Internet or the wireless password has not changed.

Why does P6SLite not receive alarm notifications?

Please check if the push function is turned on (displayed as “Arm/Disarm” to open), whether there is open alarm push linkage (Setting – Motion Detection/Humanoid Tracking), whether the APP allows push permission on the mobile phone.

When playback video can not find video files?

Please check if the SD card is damaged, whether there is an SD card installed, check the camera time, check whether the playback time is correct.

The P6SLite camera cannot connect to WIFI?

Please check whether the distance between the camera and the router is too far, whether the router have the DHCP function enabled, whether the connected WIFI is 2.4G (the camera does not support 5G), and whether the router opens the anti-mite network function, so that filtered device

This article contains all the contents of P6SLite, multiple ways to add, settings of P6SLite camera functions, how to use the computer, and will be continuously updated.

How To SetUp P6SLite For Pc EasyVMS

P6SLite For Pc software name is EasyVMS, you can download the software here, support Windows PC.

P6SLite For Pc Function

System operating environment

Operating system: Microsoft Windows 7, 8.1, 10 compatible with some XP systems

CPU: Intel AMD 32-bit or 64-bit

Memory: 2G or higher

Note: Due to the different operating systems and hardware of the PC platform, the smoothness and functionality of the software are affected to varying degrees

Install and login to P6SLite For Pc

Find the file  in the software directory, double-click the EasyVMS installation file to install the client software, and the login dialog box will pop up, as shown below. The current page will be adapted according to the full Chinese and English systems.

Then click Run EasyVMS softwareand choose the language that suits you to log in to the system;

Local login user name default: admin, password default: empty; After logging in, select the software in the upper right corner  to log out of the software;

Cloud account login, please enter APP P6SLite account, currently supports scanning code login and manual account input (manual input requires attention to the choice of server)

Interface Introduction

The main navigation buttons at the top of the interface are real-time preview, remote playback, electronic album, device management, system log, alarm information, plan recording, system settings, click the navigation button to enter the corresponding configuration interface. On the left side of the interface is the device navigation, on the right is the display area, and in the upper right corner are the help, logout, minimize, maximize, and close buttons. Start with device management and add devices.

Device Management

Click the Device Management button to enter the Device Management page, as shown in the following figure; On the device management page, you can perform manual adding, modifying, batch deleting, batch upgrading, APP cloud account management, region adding, as well as batch adding, batch modifying IP, and successfully added devices, right-click remote settings, time synchronization, clear alarms, display QR codes and other functions.

Zone configuration

For easy zone device management (the default zone is preferred when added by camera), you can right-click the default zone to customize the new zone, or click Add Zone below.

ADD P6SLite Camera

Click the refresh button in the lower right corner to search for the P6SLite camera

Select the IP address of the camera, then click “Batch Change IP” to modify the IP address of the camera.

If you don’t know how to modify the IP address, please check the “Refer to the computer network card to set the IP” software will automatically modify the IP address according to your network environment, of course, you can also manually modify the IP address.

The default user name of the device: admin, password: empty, click Confirm, save the modified IP address, and then click the refresh button again, search for the new IP address again, and then select the IP address and click Add in bulk.

Then click the real-time preview button to enter the preview interface

Double-click the IP address of the camera on the right, and the video will be automatically displayed in the surveillance screen on the right.

If you add multiple devices, you can select the Default Region context menu and select Turn on automatically, Open by region, Close preview by region.

Delete Camera

Select one or more devices to be deleted in the device list, click the Delete button, the system will prompt whether to confirm the deletion of the device, click the [OK] button, the device on the default zone list will be deleted.

Upgrade Camera

Local upgrade: Select the device you want to upgrade in the list of added devices, and then select Bulk upgrade. Be sure to restore the factory settings after the upgrade is successful.

Cloud Upgrade: Select the device to be upgraded in the list of added devices, and then select Cloud Upgrade (whether the device supports cloud upgrade), otherwise the Cloud Upgrade page will not be prompted

Remote playback

Video retrieval

Enter the remote playback interface, select the channel that needs to be played back on the left device tree (Note: currently only supports one playback all the way), select the date on the calendar, click the “Search” button, the system starts to search for the recording in the hard disk recorder (or local hard disk), and display the search results in the search results panel. As shown in the following figure:

Playback control

Control Buttons

· Play button, tap when the recording stops to resume playback.

· Pause the playback button, tap the playback pause while the recording is playing, and tap again to resume playback.

· Stop playing button, tap while playing to stop the screen.

· Audio control button, tap to turn on/off audio playback during playback.

· Choose  hasten  Slow down Fast/slow rate control is possible.

· Click  Playback capture button, you can take a screenshot of the playback screen.

Timeline operations

(1) The scale on the timeline is 0-24 points.

(2) Mouse over the timeline to scroll to zoom in and out of the timeline.

(3) Double-click the timeline to play it directly.

Device control

The device management interface can also control the device, including: time synchronization, camera restart, clear alarm, etc.

Time synchronization

In the Device Management > the Added Device interface, select the device and click the [Time Sync] button to synchronize the device time with the PC time.

System settings

Click System Settings to enter the local settings of the software.

1.You can set the EasyVMS software to automatically open at startup, check the button   , and save. After saving, EasyVMS will automatically run after the next boot.

2.You can set the automatic calibration interval time of the device, check the button, and enter the interval time (such as: 120). After saving, each device will automatically calibrate every 120 minutes. It is recommended to calibrate every 30 minutes

3.You can set the local recording duration, select the recording duration input box, and enter the recording duration (for example: 30). Once saved, each recording is saved with an interval of 30 minutes. You can also set the recording format and select the recording format (e.g. PRV/AVI). After saving, the local recording format is . PRV.  A dedicated PRV player can be downloaded on the official website

4.You can set the log retention period and directly select the recording duration (e.g. six months). Once saved, logs are retained for six months.

5.You can set the capture and video saving path, click to select the path, such as (G: EasyVMSImage/ G: EasyVMSVideo). After saving, the capture path is set to G: EasyVMSImage, the recording path is set to G: EasyVMSVideo.

Account management: Enter the system settings interface to manage local account login, including creating operator users, creating guest users, modifying user passwords, and deleting devices.

Click the “System Settings” button, click the “Account Management” button, click [Create], enter the new user name, password and user group (such as operator) to save, the user group will have one more new user “user1”.

.

See also  How To SetUp P6SLite Camera (Complete Manual )

.

Click the [Account Management] button, select the operator user user1, and click [Delete]. After deletion, the new user disappears.

Currently, there are three levels of user permissions:

Real-time preview

Real-time preview

Double-click the device name in the left device to open a preview of all channels of the device on the right preview interface, as shown below:

To turn off single-way preview, you can right-click “Close Preview” on the list that pops up the video channel to turn off the channel preview.

Right-click the default region in the device bar on the left and select “Turn off preview by region”

Preview controls

On the Preview Actions tab, the following figure is shown.

· The icon is to turn off the full channel preview button, clicking it will close all preview screens.

· The icon  is the capture button, click to capture the current channel image to the local computer.

· The icon  is the on/off full-channel recording button, clicking it will enable/disable full-channel recording.

· The icon  is the on/off audio button, clicking it will turn channel audio on/off.

· The icon  is the screen split button, click to set the number of screen split paths, currently supports single screen, four screen, nine screen, sixteen screen, twenty-five screen, thirty-six screen road preview.

· The icon  is a preview of the next video screen, which can be used in single screen, four screen, nine screen, sixteen screen, twenty-five screen, thirty-six screen, etc.

· The icon  is a full-screen toggle button, click to switch to full-screen preview. In full screen, you can right-click “exit full screen” or press the keyboard ESC key to exit.

· The icon  is a group tour, and you can group the picture in the case of many cameras or NVR images. Then make a grouped preview

Right-click menu control

Select the real-time preview channel on the preview interface and right-click to bring up the right-click control menu, as shown below:

Set up P6SLite camera

OSD settings

you can add the name of the current camera and the placement of the moving time; Click the red font to move

Image settings

Night vision mode; Set the night market mode on a dual-light device to achieve a full-color image at night.

IR-CUT sensitivity (the higher the modified value, the higher the sensitivity): The earlier the black and white image is switched at night.

IR-CUT switching time (the larger the modification value, the longer the switching time): Extend the time to switch black and white images.

The image is flipped, and the image can be selected to be corrected by software when the camera is hoisted.

Network configuration

Network Setting

modify the IP address required by the camera in the network

WiFi settings

Select SSID (wifi name), click search, enter wifi password.

After filling in the wifi name and password, select Check wireless settings, it will pop up to check the validity of wifi configuration (display failure, please check wifi password or refresh the page) If the wifi configuration is successful, then unplug the wire, the real-time preview screen will be black or stuck after about 30 seconds to return to normal (the camera is switching network card)

Normal wifi and wifi hotspot mode switching: a When the camera is powered on, the camera will automatically switch to wifi hotspot direct connection without plugging in the network cable;

When the camera is powered on first in the network cable or plugged in the network cable first, the camera will switch to normal wifi mode. C Manually force switch between normal wifi and wifi hotspot camera will restart

Port setting

HTTP/signaling/data port modification in the corresponding access software, need to manually add to modify the port number, otherwise it can not be effectively accessed (non-professionals do not recommend modification, so as not to add device failure)

Mail settings

enable and configuration methods

FTP settings

Encoding settings

encoding parameters

Modify the format and appropriate parameters of the video picture to achieve the best effect.

audio settings

input volume refers to the size of the camera microphone recording, the larger the value, the louder the playback sound of the monitoring device; The output volume refers to the sound played by the camera horn, the higher the number, the louder the sound played by the camera.

Alarm settings

Motion detection

Refers to the way to enable or disable motion detection, and the way to trigger the motion detection alarm is to trigger the email (capture a picture when the alarm is sent to the specified mailbox by email, and the mailbox must be set up first);

Trigger FTP (capture a picture when alarming, and send the picture to the FTP terminal through the set FTP server); Linkage push (refers to whether to receive camera alarm reminders, the subscription function on the home page needs to enable linkage push);

Trigger capture (a picture will be captured when a moving signal is detected, and the captured picture can be viewed in the message function on the home page); trigger recording (recording in different colors after detecting a moving signal);

Select the area (refers to the selected area on the screen with a movement signal will alarm, the selected area is subject to the green box)

Client logs

Enter the system log interface, select the client log, select the user, start time, end time and other conditions to filter, click the [Query] button, you can query all the operation log information according to the conditions, each log information includes the operation user name, machine IP, time, description and other information.

Click the Export button to save the operation information as a .csv format file, as shown in the following figure. ：

Electronic photo album

The electronic album is mainly used for the management of local channel capture and post-recording files, and users can search for viewing and deleting a series of operations according to different filter types.

Search by device, select any device, and search for local pictures and videos under that device.
Search by date, select a date (e.g. June 5) to search for local images and videos under that date.
Search by media type, select the image/video type (e.g. Video) to search all local video files.
In addition, you can delete and jump the playback operation of the picture/video, and directly select the file and right-click to execute.

Alarm information

The alarm information interface records all types of alarm information of the software, including motion detection, video loss, alarm input, heartbeat loss, etc., and users can view, export and backup operations on various alarm information.

View alarm information

Select the alarm information type (for example, only check Video Loss and Alarm Input) to view all categories of alarm information: click the [Export] button, select the save path, and export the alarm information to the local computer.

<p>The post P6SLite Camera Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

Smart Bird Feeder Camera,1080P HD Camera Auto Capture Bird Videos & Solar Panel, App Notify When Birds Detected, Free AI Identify Bird Species, Bird House with Built-in Microphone.

Download Bird Lover app

Download and install the Bird Lover App for either IOS or Android.

Login Bird Lover app

Once downloaded, the APP will prompt you to register your device. Enter your phone number or email address which one makes you feel comfortable and select the country you live in. You will receive the registration code. Input the registration code, then create a password.

Note

Indicator Description

Connect Bird Lover Bird Feeder Camera To Wifi

1. Turn on the Bird Lover Bird Feeder camera power and you will see the indicator light flashing quickly and hear a sound.

.

2. Open the Bird Lover App, click +, select your Bird Feeder Camera (you can choose one at random, the connection is the same), and then follow the instructions of the App.

3. Bird Lover Bird Feeder Camera only supports 2.4G wifi, please make sure your current wifi is 2.4G.
Enter your wifi password, make sure the wifi password and wifi are correct and click Next.

4. Scan the QR code with the Bird Feeder camera. You will hear a prompt sound after a successful scanning.

NOTE: The QR code needs to be aimed at the camera below

5. Wait for Bird Lover Bird Feeder Camera to connect to your wifi, about 60-120 seconds.

Detection settings

1. Turning on or off the “Motion Detection” at the Features interface.

2. Make sure there is an option to turn on notifications.

Click “ME” in the lower right corner, Click the settings button in the upper right corner,Click App Notification.

3. Click “Alarm” to turn on or off. You also can set schedule for “Do Not Disturb Schedule” at the same interface.

Identify live birds

1. Click “bird” icon

2. Click “Gallery”-Click “photo”-Click “bird” icon

Reset Bird Lover Bird Feeder Camera

Press and hold the reset button for 5 seconds to reset the camera.

Bird Lover APP INTERFACE INTRODUCTION

Install Bird Feeder Camera

1. Stick the sticker on the tree or wall and drill holes within the range marked on the sticker.

2. Insert the green plastic screw spacers into the hole.

3. Fix the bracket with long screws.

4. Install the bird feeder and align the three holes underneath.

5. Fix bird feeder with three short screws.

6. Install the perch with the two screws in the package.

7. The bird house can rotate left and right.

How to Charge Bird Lover Bird Feeder Camera?

Bird Lover Bird Feeder Camera FAQ and Troubleshooting

How to get it to connect to two different routers?

It cannot be connected to two different routers at the same time.If you want to change routers, you will need to reset the camera and reconnect your phone and camera. Please make sure that your phone and camera are both connected to the same Wi-Fi network before pairing.

How to reset Bird Lover Bird Feeder Camera?

Why The current network is in poor condition/The APP keeps going round in circles?

The network signal is weak if there are walls between the outlet, router and phone. This is because the network signal is absorbed or blocked by walls or large obstacles. It will help to have strong Wi-Fi with a Wi-Fi extender/booster.

How to charge Bird Feeder Camera?

A solar charging panel integrated into the roof can provide a constant source of power to support the smart bird camera. You can charge the battery of the Bird Box Camera via USB for continuous charging at night and on rainy days.

Why the Bird Lover Bird Feeder Camera battery is drain so fast?

It is low power consumption camera. Plus the solar panel power in charge, it can maintain the daily energy consumption in sunny day. If the battery drains too fast, you should check:

How to identify birds species?

Simply click on the “Identify” icon and the app will identify the bird species and provide a description of the bird. See the manual for details.

Why the recognition result is wrong?

The accuracy of the results depends on the angle and clarity of the bird images.

To ensure a correct result, please ensure that the image is clear enough. The identifying features (bird’s head, tail, wings or pattern on feathers) should not be obscured by obstructions.

The bird should be in the main position in the picture; try to capture the best moment to recognise the bird if the previous recognition accuracy rate is too low; if there are two or more bird species in a picture, the identified result will be the one in the main position.

How many account can connect this Bird Lover Bird Feeder Camera ?

Only one account can connect to Bird Lover Bird Feeder Camera, you can share it with other accounts through the sharing function.

Can I use the Bird Lover Bird Feeder Camera without a TF storage card?

It is not affected for daily use without TF storage card. Without storage card, it can receive notifications, watch in real time, take pictures and record videos (It will be stored in the APP Gallery );

Just can’t record.

Will this camera show video through the app if my phone is 5g?

Yes.

.

<p>The post How To SetUp Bird Lover Bird Feeder Camera first appeared on NVR IPCAMERA SECURITY.</p>

Playlist

2 Videos

 

V380 and V380 PRO

5:02

 

V380 Pro Apk Home Security Camera Settings

13:01

<p>The post V380 Pro Camera Instructions for use first appeared on NVR IPCAMERA SECURITY.</p>

How to buy cloud storage service?

Click [Cloud Storage Service] -> [Buy Service] -> Select a Package to Purchase -> Click [Binding] and the binding is completed.

Tips:
Before binding the device to the cloud storage service, pay attention to:
1. Does the current firmware version of the device support this feature?
2. Whether the current account has purchased the cloud storage service package

How to unlock device cloud storage services?

1. Mobile phone number login user: Click [cloud storage service] -> [unzip service] -> [Yes] -> [Get verification code and enter the verification code] -> [Click OK] to finish unbinding.
2. E-mail login user: Click [Cloud Storage Service] -> [Unbundling Service] -> [Yes] -> [Get Verification Code and enter Verification Code] -> [Click OK] to finish unbinding.

Cloud Storage Package Fees

1)【$2.9/month】Videos are reserved for 7 days. Package service period is one month.
2)【$4.6/month】Videos are reserved for 30 days. Package service period is one month.
3)【$29/year】Video is reserved for 7 days. The package service period is 12 months.
4)【$46/year】The video is reserved for 30 days. The package service period is 12 months.

Note:
1) The use period of the package is calculated from the purchase time of the package. After the package expires, the equipment stops uploading videos,but users can still access the recorded videos during retention period
2) One cloud storage package can only be bound to one device

How to check the valid period of the cloud service

1) Select the device that needs to view the cloud storage package information in the [My Device] list.
2) Click the [☁] cloud icon in the lower right corner of the device playback window to enter the cloud storage service interface. You can view the cloud service package details of the device.

Note : Package valid period starts from package purchase time

Buy cloud storage package payment

1) Chinese mobile phone system defaults to domestic cloud storage service, supports WeChat payment, and AliPay payment two payment methods
2) Non-Chinese system defaults to foreign cloud storage service, only supports PayPal payment

Cloud storage package replacement and renewal method

【Cloud Storage Package Replacement】
· After getting the new package, you need to untie the old package first, and then bind the device to the new package

【Cloud Storage Package Renewal】
· Click the cloud storage icon in the lower right corner of the device playback window to enter the [Cloud Storage Service] interface
· Select [Renew this service] to renew the package and follow the system prompts (below)

Note: Package renewal can only continue the type of package already bound, and can not be overlaid with other types of packages. If you need to change the package type, please refer to the cloud storage package replacement method.

Buy multiple packages at once, the list shows only one package

· Only one package comes into effect at one single purchase, if you want to buy several same packages,please pay at one time by changing the package quantity, and the valid time will accumulated，if pay you pay them separately,the valid time will still be the same with one package
.If you want to buy several different packages,please pay them separately.

What is “artificial intelligence” and “message notification service”

【Artificial Intelligence】
· After the artificial intelligence package is bound, the alarm mode is artificial intelligence detection. Artificial intelligence is recognized by the deep neural network system. The person in front of the camera will trigger the alarm and greatly reduce the false alarm rate

【message notification service】
· Once the package is bound to camera,when the alarm is triggered，system will send notification message to users，based on login way，SMS(phone account login user)，e-mail(e-mail login user) or “my message”on the App(third party login user)

Can overseas users use cloud storage services?

Overseas users already support international cloud storage services

Reminder still expires after the package renews

Try to untie the package and re-bind it

How many devices can be bound to cloud storage package

· One cloud storage package can only be bound to one camera
· Within the package valid period, the bound device to the package can be changed, before linking the package to a new device, you should unbind it with the current device

· One camera can only be bound to one Cloud storage package
· If you want to change for another package,you should untie the current one, then tie a new one.

Note: The cloud storage service can only query the recording files of the current bound device.

<p>The post V380 Pro Cloud storage issues first appeared on NVR IPCAMERA SECURITY.</p>